Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under Contract DE-AC04-94AL85000.
Wind turbine blades continue to be the target of technological improvements by the use of better designs, materials, manufacturing, analysis and testing. As the size of turbines has grown over the past decade, designers have restrained the associated growth in blade weight to less than would have been possible through simple scaling-up of past approaches. These past improvements are briefly summarized. Manufacturing trends and design drivers are presented, as are the ways these design drivers have changed. Issues related to blade material choices are described, first for the currently dominant glass fibre technology and then for the potential use of carbon fibres. Some possible directions for future blade design options are presented, namely new planforms, aerofoils and aeroelastic tailoring. The significant improvement in sophistication of stress analysis and full-scale blade testing are also discussed.
This report presents an analysis of trends in fatigue results from the Montana State University program on the fatigue of composite materials for wind turbine blades for the period 2005-2009. Test data can be found in the SNL/MSU/DOE Fatigue of Composite Materials Database which is updated annually. This is the fifth report in this series, which summarizes progress of the overall program since its inception in 1989. The primary thrust of this program has been research and testing of a broad range of structural laminate materials of interest to blade structures. The report is focused on current types of infused and prepreg blade materials, either processed in-house or by industry partners. Trends in static and fatigue performance are analyzed for a range of materials, geometries and loading conditions. Materials include: sixteen resins of three general types, five epoxy based paste adhesives, fifteen reinforcing fabrics including three fiber types, three prepregs, many laminate lay-ups and process variations. Significant differences in static and fatigue performance and delamination resistance are quantified for particular materials and process conditions. When blades do fail, the likely cause is fatigue in the structural detail areas or at major flaws. The program is focused strongly on these issues in addition to standard laminates. Structural detail tests allow evaluation of various blade materials options in the context of more realistic representations of blade structure than do the standard test methods. Types of structural details addressed in this report include ply drops used in thickness tapering, and adhesive joints, each tested over a range of fatigue loading conditions. Ply drop studies were in two areas: (1) a combined experimental and finite element study of basic ply drop delamination parameters for glass and carbon prepreg laminates, and (2) the development of a complex structured resininfused coupon including ply drops, for comparison studies of various resins, fabrics and pry drop thicknesses. Adhesive joint tests using typical blade adhesives included both generic testing of materials parameters using a notched-lap-shear test geometry developed in this study, and also a series of simulated blade web joint geometries fabricated by an industry partner.
The problem of a cracked adhesive bonded DCB-type fracture specimen has been analyzed using a hybrid stress model finite element analysis which incorporates an advanced crack tip element. Stresses in the near and far fields have been studied as a function of adherend/adhesive modulus ratio and adhesive thickness. The results are compared to monolithic systems with regard to the stress intensity factor and the localization of the singular stress domain associated with the crack tip.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.