Current understanding of the behaviour of sea breezes in the offshore environment is limited but rapidly requires improvement due, not least, to the expansion of the offshore wind energy industry. Here we report on contrasting characteristics of three sea-breeze types on five coastlines around the southern North Sea from an 11 year model-simulated climatology. We present and test an identification method which distinguishes sea-breeze types which can, in principle, be adapted for other coastlines around the world. The coherence of the composite results for each type demonstrates that the method is very effective in resolving and distinguishing characteristics and features. Some features, such as jets and calm zones, are shown to influence offshore wind farm development areas, including the sites of the proposed wind farms up to 200 km offshore. A large variability in sea-breeze frequency between neighbouring coastlines of up to a factor of 3 is revealed. Additionally, there is a strong association between sea-breeze type on one coastline and that which may form coincidentally on another nearby. This association can be as high as 86% between, for example, the North Norfolk and East Norfolk coasts. We show, through associations between sea-breeze events on coastlines with contrasting orientations, that each coastline can be important for influencing the wind climate of another. Furthermore, we highlight that each sea-breeze type needs separate consideration in wind power resource assessment and that future larger turbines will be more sensitive to sea-breeze impacts.

The behaviour and characteristics of the marine component of sea breeze cells have received little attention relative to their onshore counterparts. Yet there is a growing interest and dependence on the offshore wind climate from, for example, a wind energy perspective. Using idealized model experiments, we investigate the sea breeze circulation at scales which approximate to those of the southern North Sea, a region of major ongoing offshore wind farm development. We also contrast the scales and characteristics of the pure and the little known corkscrew and backdoor sea breeze types, where the type is pre-defined by the orientation of the synoptic scale flow relative to the shoreline. We find, crucially, that pure sea breezes, in contrast to corkscrew and backdoor types, can lead to substantial wind speed reductions offshore and that the addition of a second eastern coastline emphasises this effect through generation of offshore "calm zones". The offshore extent of all sea breeze types is found to be sensitive to both the influence of Coriolis acceleration and to the boundary layer scheme selected. These extents range, for example for a pure sea breeze produced in a 2 m s-1 offshore gradient wind, from 0 km to 21 km between the Mellor-Yamada-Nakanishi-Niino and the Yonsei State University schemes respectively. The corkscrew type restricts the development of a backdoor sea breeze on the opposite coast and is also capable of traversing a 100 km offshore domain even under high along-shore gradient wind speed (>15 m s-1) conditions. Realistic variations in sea surface skin temperature and initializing vertical thermodynamic profile do not significantly alter the resulting circulation, though the strengths of the simulated sea breezes are modulated if the effective land-sea thermal contrast is altered. We highlight how sea breeze impacts on circulation need to be considered in order to improve the accuracy of both assessments of the offshore wind energy climate and forecasts of wind energy output

This paper presents results from two flume runs of an ongoing series examining flow structure, sediment transport and deposition in hydraulic jumps. It concludes in the presentation of a model for the development of sedimentary architecture, considered characteristic of a hydraulic jump over a non‐eroding bed. In Run 1, a hydraulic jump was formed in sediment‐free water over the solid plane sloping flume floor. Ultrasonic Doppler velocity profilers recorded the flow structure within the hydraulic jump in fine detail. Run 2 had identical initial flow conditions and a near‐steady addition of sand, which formed beds with two distinct characteristics: a laterally extensive, basal, wedge‐shaped massive sand bed overlain by cross‐laminated sand beds. Each cross‐laminated bed recorded the initiation and growth of a single surface feature, here defined as a hydraulic‐jump unit bar. A small massive sand mound formed on the flume floor and grew upstream and downstream without migrating to form a unit bar. In the upstream portion of the unit bar, sand finer than the bulk load formed a set of laminae dipping upstream. This set passed downstream through the small volume of massive sand into a foreset, which was initially relatively coarse‐grained and became finer‐grained downstream. This downstream‐fining coincided with cessation of the growth of the upstream‐dipping cross‐set. At intervals, a new bed feature developed above and upstream of the preceding hydraulic‐jump unit bar and grew in the same way, with the foreset climbing the older unit bar. The composite architecture of the superimposed unit bars formed a fanning, climbing coset above the massive wedge, defined as one unit: a hydraulic‐jump bar complex.

The behaviour and characteristics of the marine component of sea breeze cells have received little attention relative to their onshore counterparts. Yet there is a growing interest and dependence on the offshore wind climate from, for example, a wind energy perspective. Using idealized model experiments, we investigate the sea breeze circulation at scales which approximate to those of the Southern North Sea, a region of major ongoing offshore wind farm development. We also contrast the scales and characteristics of the <i>pure</i> and the little known <i>corkscrew</i> and <i>backdoor</i> sea breeze types, where the type is pre-defined by the orientation of the synoptic scale flow relative to the shoreline. We find, crucially, that <i>pure</i> sea breezes, in contrast to <i>corkscrew</i> and <i>backdoor</i> types, can lead to substantial wind speed reductions offshore and that the addition of a second eastern coastline emphasises this effect through generation of offshore "calm zones". The offshore extent of all sea breeze types is found to be sensitive to both the influence of Coriolis acceleration and to the boundary layer scheme selected. These extents range, for example for a <i>pure</i> sea breeze produced in a 2 m s^&minus;1 offshore gradient wind, from 10 km to 40 km between the Mellor-Yamada-Nakanishi-Niino and the Yonsei State University schemes, respectively. The <i>corkscrew</i> type restricts the development of a <i>backdoor</i> sea breeze on the eastern coast and is also capable of traversing a 100 km offshore domain even under high gradient wind speed (>15 m s^&minus;1) conditions. Realistic variations in sea surface skin temperature during the sea breeze season do not significantly affect the circulation, suggesting that a thermal contrast is only needed as a precondition to the development of the sea breeze. We highlight how sea breeze impacts on circulation need to be considered in order to improve the accuracy of assessments of the offshore wind energy climate

Abstract. Phytoplankton form the base of the marine food chain, and knowledge of phytoplankton community structure is fundamental when assessing marine biodiversity. Policy makers and other users require information on marine biodiversity and other aspects of the marine environment for the North Sea, a highly productive European shelf sea. This information must come from a combination of observations and models, but currently the coastal ocean is greatly under-sampled for phytoplankton data, and outputs of phytoplankton community structure from models are therefore not yet frequently validated. This study presents a novel set of in situ observations of phytoplankton community structure for the North Sea using accessory pigment analysis. The observations allow a good understanding of the patterns of surface phytoplankton biomass and community structure in the North Sea for the observed months of August 2010 and 2011. Two physical-biogeochemical ocean models, the biogeochemical components of which are different variants of the widely used European Regional Seas Ecosystem Model (ERSEM), were then validated against these and other observations. Both models were a good match for sea surface temperature observations, and a reasonable match for remotely sensed ocean colour observations. However, the two models displayed very different phytoplankton community structures, with one better matching the in situ observations than the other. Nonetheless, both models shared some similarities with the observations in terms of spatial features and interannual variability. An initial comparison of the formulations and parameterizations of the two models suggests that diversity between the parameter settings of model phytoplankton functional types, along with formulations which promote a greater sensitivity to changes in light and nutrients, is key to capturing the observed phytoplankton community structure. These findings will help inform future model development, which should be coupled with detailed validation studies, in order to help facilitate the wider application of marine biogeochemical modelling to user and policy needs.

No abstract

No abstract

No abstract