Highly efficient counter-propagating fiber-based optical traps are presented which utilize converging beams from fibers with 3D printed diffractive Fresnel lenses on their facet. The use of a converging beam instead of diverging beam in dual-fiber traps creates a strong trapping efficiency in both the axial and the transverse directions. Converging beams with a numerical aperture of up to 0.7 are produced by diffractive Fresnel lenses. These lenses also provide a large focal distance of up to 200 μm in a moderately high refractive index medium. Fabrication of such diffractive lenses with microsized features at the tip of a fiber is possible by femtosecond two photon lithography. In comparison to chemically etched fiber tips, the normalized trap stiffness of dual-fiber tweezers is increased by a substantial factor of 35−50 when using a converging beam produced by diffractive Fresnel lenses. The large focal length provided by these diffractive structures allows working at a large fiber-to-fiber distance, which leads to larger space and the freedom to combine other spectroscopy and analytical methods in combination with trapping.

No abstract

Simultaneous realization of ultra-large field of view (FOV), large lateral image size, and a small form factor is one of the challenges in imaging lens design and fabrication. All combined this yields an extensive flow of information while conserving ease of integration where space is limited. Here, we present concepts, correction methods and realizations towards freeform multi-aperture wide-angle cameras fabricated by femtosecond direct laser writing (fsDLW). The 3D printing process gives us the design freedom to create 180° × 360° cameras with a flat form factor in the micrometer range by splitting the FOV into several apertures. Highly tilted and decentered non-rotational lens shapes as well as catadioptric elements are used in the optical design to map the FOV onto a flat surface in a Scheimpflug manner. We present methods to measure and correct freeform surfaces with up to 180° surface normals by confocal measurements, and iterative fabrication via fsDLW. Finally, approaches for digital distortion correction and image stitching are demonstrated and two realizations of freeform multi-aperture wide-angle cameras are presented.

In this work, we propose the Fast Polarized Wave Propagation Method (FPWPM), which is an efficient method for vector wave optical simulations of microoptics. The FPWPM is capable of handling comparably large simulation volumes while maintaining quick runtime. This allows for real-world application of this method for the rapid development process of 3D-printed microoptics. By comparison to established routines like the rigorous coupled wave analysis (RCWA) or the Richards-Wolf-Integral, accuracy and superior runtime efficiency of the FPWPM are demonstrated by simulation of interfaces, gratings, and lenses. By considering polarization in simulations, the FPWPM facilitates the analysis of optical elements which employ this property of electromagnetic waves as a feature in their optical design, e.g., diffractive elements, gratings, or optics with high angle of incidence like high numerical aperture lenses.