We have developed a technique so that both transmission electron microscopy and microphotoluminescence can be performed on the same semiconductor nanowire over a large range of optical power, thus allowing us to directly correlate structural and optical properties of rotationally twinned zinc blende InP nanowires. We have constructed the energy band diagram of the resulting multiquantum well heterostructure and have performed detailed quantum mechanical calculations of the electron and hole wave functions. The excitation power dependent blue-shift of the photoluminescence can be explained in terms of the predicted staggered band alignment of the rotationally twinned zinc blende/wurzite InP heterostructure and of the concomitant diagonal transitions between localized electron and hole states responsible for radiative recombination. The ability of rotational twinning to introduce a heterostructure in a chemically homogeneous nanowire material and alter in a major way its optical properties opens new possibilities for band-structure engineering.

Vertical light emitting diodes (LEDs) based on GaAs/InGaP core/shell nanowires, epitaxially grown on GaP and Si substrates, have been fabricated. The devices can be fabricated over large areas and can be precisely positioned on the substrates, by the use of standard lithography techniques, enabling applications such as on-chip optical communication. LED functionality was established on both kinds of substrate, and the devices were evaluated in terms of temperature-dependent photoluminescence and electroluminescence.

We have synthesized GaAs-Ga(x)In(1-x)P (0.34 < x < 0.69) core-shell nanowires by metal-organic vapor phase epitaxy. The nanowire core was grown Au-catalyzed at a low temperature (450 degrees C) where only little growth takes place on the side facets. The shell was added by growth at a higher temperature (600 degrees C), where the kinetic hindrance of the side facet growth is overcome. Photoluminescence measurements on individual nanowires at 5 K showed that the emission efficiency increased by 2 to 3 orders of magnitude compared to uncapped samples. Strain effects on the band gap of lattice mismatched core-shell nanowires were studied and confirmed by calculations based on deformation potential theory.

We report on spectrally resolved photocurrent measurements on single self-assembled nanowire heterostructures. The wires, typically 3 microm long with an average diameter of 85 nm, consist of InAs with a 1 microm central part of InAsP. Two different sets of wires were prepared with phosphorus contents of 15+/-3% and 35+/-3%, respectively, as determined by energy-dispersive spectroscopy measurements made in transmission electron microscopy. Ohmic contacts are fabricated to the InAs ends of the wire using e-beam lithography. The conduction band offset between the InAs and InAsP regions virtually removes the dark current through the wires at low temperature. In the optical experiments, interband excitation in the phosphorus-rich part of the wires results in a photocurrent with threshold energies of about 0.65 and 0.82 eV, respectively, in qualitative agreement with the expected band gap of the two compositions. Furthermore, a strong polarization dependence is observed with an order of magnitude larger photocurrent for light polarized parallel to the wire than for light polarized perpendicular to the wire. We believe that these wires form promising candidates as nanoscale infrared polarization-sensitive photodetectors.

We report a method using in situ etching to decouple the axial from the radial nanowire growth pathway, independent of other growth parameters. Thereby a wide range of growth parameters can be explored to improve the nanowire properties without concern of tapering or excess structural defects formed during radial growth. We demonstrate the method using etching by HCl during InP nanowire growth. The improved crystal quality of etched nanowires is indicated by strongly enhanced photoluminescence as compared to reference nanowires obtained without etching.