Vascularization still remains an obstacle to engineering of bone tissue with clinically relevant dimensions. Our aim was to induce axial vascularization in a large volume of a clinically approved biphasic calcium phosphate ceramic by transferring the arteriovenous (AV) loop approach to a large animal model. HA/β-TCP granula were mixed with fibrin gel for a total volume of 16 cm 3 , followed by incorporation into an isolation chamber together with an AV loop. The chambers were implanted into the groins of merino sheep and the development of vascularization was monitored by sequential non-invasive magnetic resonance imaging (MRI). The chambers were explanted after 6 and 12 weeks, the pedicle was perfused with contrast agent and specimens were subjected to micro-computed tomography (µ-CT) scan and histological analysis. Sequential MRI demonstrated a significantly increased perfusion in the HA/β-TCP matrices over time. Micro-CT scans and histology confirmed successful axial vascularization of HA/β-TCP constructs. This study demonstrates, for the first time, successful axial vascularization of a clinically approved bone substitute with a significant volume in a large animal model by means of a microsurgically created AV loop, thus paving the way for the first microsurgical transplantation of a tissue-engineered, axially vascularized bone with clinically relevant dimensions.

Bone tissue engineering approaches increasingly focus on the use of mesenchymal stem cells (MSC). In most animal transplantation models MSC are isolated and expanded before auto cell transplantation which might be critical for clinical application in the future. Hence this study compares the potential of directly auto-transplanted versus in vitro expanded MSC with or without bone morphogenetic protein-2 (BMP-2) to induce bone formation in a large volume ceramic bone substitute in the sheep model. MSC were isolated from bone marrow aspirates and directly auto-transplanted or expanded in vitro and characterized using fluorescence activated cell sorting (FACS) and RT-PCR analysis before subcutaneous implantation in combination with BMP-2 and β-tricalcium phosphate/hydroxyapatite (β-TCP/HA) granules. Constructs were explanted after 1 to 12 weeks followed by histological and RT-PCR evaluation. Sheep MSC were CD29+, CD44+ and CD166+ after selection by Ficoll gradient centrifugation, while directly auto-transplanted MSC-populations expressed CD29 and CD166 at lower levels. Both, directly auto-transplanted and expanded MSC, were constantly proliferating and had a decreasing apoptosis over time in vivo. Directly auto-transplanted MSC led to de novo bone formation in a heterotopic sheep model using a β-TCP/HA matrix comparable to the application of 60 μg/ml BMP-2 only or implantation of expanded MSC. Bone matrix proteins were up-regulated in constructs following direct auto-transplantation and in expanded MSC as well as in BMP-2 constructs. Up-regulation was detected using immunohistology methods and RT-PCR. Dense vascularization was demonstrated by CD31 immunohistology staining in all three groups. Ectopic bone could be generated using directly auto-transplanted or expanded MSC with β-TCP/HA granules alone. Hence BMP-2 stimulation might become dispensable in the future, thus providing an attractive, clinically feasible approach to bone tissue engineering.

Treatment of complex bone defects in which vascular supply is insufficient is still a challenge. To overcome the limitations from autologous grafts, a sheep model has been established recently, which is characterized by the development of an independent axial vascularization of a bioartificial construct, permitting microsurgical transplantation. To engineer independently axially vascularized bone tissue in the sheep arteriovenous (AV)-loop model, mesenchymal stem cells (MSCs), without and in combination with recombinant human bone morphogenetic protein-2 (rhBMP-2), were harvested and directly autotransplanted in combination with β-tricalcium phosphate-hydroxyapatite (β-TCP-HA) granules into sheep in this study. After explantation after 12 weeks, histological and immunohistochemical evaluation revealed newly formed bone in both groups. An increased amount of bone area was obtained using directly autotransplanted MSCs with rhBMP-2 stimulation. Osteoblastic and osteoclastic cells were detected adjacent to the newly formed bone, revealing an active bone remodelling process. Directly autotransplanted MSCs can be found close to the β-TCP-HA granules and are contributing to bone formation. Over time, magnetic resonance imaging (MRI) and micro-computed tomography (μCT) imaging confirmed the dense vascularization arising from the AV-loop. This study shows de novo engineering of independently axially vascularized transplantable bone tissue in clinically significant amounts, using directly autotransplanted MSCs and rhBMP-2 stimulation in about 12 weeks in the sheep AV-loop model. This strategy of engineering vascularized transplantable bone tissue could be possibly transferred to the clinic in the future in order to augment current reconstructive strategies.

Background/Aims: The aim of this study was to generate an axially vascularized bone substitute. The arteriovenous (AV)-loop approach in a large-animal model was applied in order to induce axial vascularization in a clinically approved processed bovine cancellous bone (PBCB) matrix of significant volume with primary mechanical stability and to assess the course of increasing axial vascularization. Methods: PBCB constructs were implanted into 13 merino sheep together with a microsurgically created AV loop in an isolation chamber. The vascularization process was monitored by sequential magnetic resonance imaging (MRI) scans. Explants were subjected to micro-computed tomography (micro-CT) analysis, histomorphometry and immunohistochemistry for CD31 and CD45. Results: Increasing axial vascularization in PBCB constructs was quantified by histomorphometry and visualized by micro-CT scans. Intravital sequential MRI scans demonstrated a significant progressive increase in perfused volume within the matrices. Immunohistochemistry confirmed endothelial lining of newly formed vessels. Conclusion: This study demonstrates successful axial vascularization of a clinically approved, mechanically stable bone substitute with a significant volume by a microsurgical AV loop in a large-animal model. Thus microsurgical transplantation of a tissue-engineered, axially vascularized and mechanically stable bone substitute with clinically relevant dimensions may become clinically feasible in the future.