En este trabajo se desarrolló una metodología estadística para caracterizar la irradiancia solar y temperatura ambiente a partir de medidas reales. Estas variables determinan el comportamiento de la energía solar en un lugar determinado y son fundamentales para establecer el desempeño de diversos sistemas que usan energía solar como el caso de los sistemas fotovoltaicos o los solares térmicos. Debido a que estos parámetros no son controlables por el hombre, ya que se caracterizan por tener un comportamiento aleatorio en la superficie terrestre, se desarrolló una metodología para obtener una relación matemática que en primera instancia determina una función de distribución de probabilidad para 12 horas al día, de 6 de la mañana (6:00 a. m.) a 6 de la tarde (6:00 p. m.), con el fin de predecir el comportamiento de estas variables meteorológicas. Con estas funciones de densidad, se calculan luego las respectivas funciones de probabilidad acumuladas. En los casos en que estas no se pueden determinar de forma determinística, se calcula numéricamente un polinomio que mejor las representa. Dichas expresiones obtenidas, sirven como base para realizar predicciones estadísticamente confiables del desempeño de distintos sistemas que utilicen como fuente primaria la energía solar, utilizando métodos estocásticos, como por ejemplo las simulaciones de Montecarlo. Para mostrar la metodología descrita, se tomaron como ejemplo datos medidos en la ciudad de Bogotá. Finalmente, se presentan las respectivas expresiones que caracterizan la irradiancia y la temperatura ambiente para cada hora a partir de un número aleatorio entre 0 y 1 de manera estadísticamente confiable.
This article contains the description of a circuital model, which was developed to represent the energy production of a photovoltaic panel in a more accurate way, taking into consideration the decrease of its operational time. Furthermore, a comparison among the experimental, the posed simulated model in PSIM and the results obtained by a piece of software developed by some students of the Universidad Distrital is performed in order to verify the values provided by the software and demonstrate the optimal operation of the developed model.
Resumen El presente artículo expone las características y las condiciones operativas bajo las cuales funciona un sistema fotovoltaico híbrido desarrollado para ser la fuente de energía de respaldo para diferentes equipos AC que sean dispuestos como cargas críticas a las cuales se les deba garantizar un suministro de energía constante. El sistema se compone de los elementos básicos de un Sistema Fotovoltaico Autónomo común (mó-dulos y baterías), una caja de maniobras que permitirá la interconexión entre los diferentes elementos del sistema, y de una UPS que funciona como interfaz para la alimentación de las cargas críticas, ya sea que esta provenga de la red de suministro eléctrico o del generador fotovoltaico. Para el control de carga del sistema, se implementó un regulador de desarrollado con instrumentación, el cual realiza un monitoreo constante de las tensiones del sistema para emitir las señales de activación de la caja de maniobra, y realizar un registro de las operaciones efectuadas.Palabras Clave: sistemas fotovoltaicos híbridos, instrumentación virtual, reguladores de carga, LabVIEW, dimensionamiento de sistemas fotovoltaicos.Abstract This article presents operative characteristics and conditions under which a hybrid photovoltaic system developed to be the backup electrical source of AC equipment used as critical charges that should be guaranteed to have a constant energy supply functions. The system is made up of the basic elements of a common Autonomous Photovoltaic System (modules and batteries), a box of maneuvers that will enable the interconnection among different elements of the system, and a UPS that acts as an interface to feed critical charges that come from the electrical supply network or from the photovoltaic generator.
. (2014). Aplicación de los sistemas fotovoltaicos conectados a la red: estado del arte. Revista Tecnura, Edición especial, 157-172. ResumenEn este trabajo se describen todos los conceptos necesarios para lograr implementar un sistema fotovoltaico como alternativa para ser utilizado como generador distribuido. Para ello, se realiza un pequeño estado del arte en el cual se manejan conceptos básicos, desde el funcionamiento de una celda solar hasta conceptos de redes inteligentes aplicados en la gestión de la demanda. Asimismo, se abarca un repaso sobre los marcos regulatorios existentes en Colombia, donde se habla de generación distribuida debido a la falta del mismo. Es necesario comparar tales regulaciones con los diferentes marcos regulatorios existentes en otros países, como Alemania, España y EE.UU., para obtener un modelo de trabajo idóneo. Finalmente, se decide utilizar un generador fotovoltaico conectado a la red de baja tensión como alternativa en los sistemas de generación distribuida, ya que con estos se pueden realizar balances energéticos, esto en caso de que en el país en donde se emplee esta alternativa no se tenga establecido un marco regulatorio adecuado, de manera que el usuario no tenga problemas con las entidades regulatorias actuales. Palabras clave: balance energético, energías renovables, generación distribuida, gestión de la demanda, sistemas fotovoltaicos. AbstractThis paper outlines all necessary concepts to successfully implement a photovoltaic system as an alternative in a distributed generation scheme. For this purpose, it is made a short state of the art in which basic concepts are addressed, from a solar cell operation to smart grid concepts applied on demand management. Likewise, a review of the different regulatory frameworks in Colombia is entailed, especially those related to distributed generation, due to the lack of these ones. It is necessary to make a comparison with other regulations from other countries,
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.