Desde el siglo XVII hasta la actualidad los\ud levantamientos arquitectónicos han cambiado\ud enormemente debido al avance en\ud las técnicas e instrumentos de medida.\ud En la última década las aplicaciones\ud que permiten trabajar sin demasiadas\ud dificultades con datos 3D han desencadenado\ud la necesidad de generar y visualizar\ud datos de este modo. Se ha pasado\ud de técnicas de captura discreta (métodos\ud topográficos, fotogrametría analógica y\ud analítica) donde el operador debía decidir\ud que elemento tomaba, a técnicas de\ud captura masiva como la fotogrametría\ud digital y el láser escáner terrestre, donde\ud el instrumento captura automáticamente\ud la información 3D. Este avance ha cambiado\ud la forma de representar elementos\ud arquitectónicos, evolucionando en paralelo\ud al desarrollo de la técnica y pasando\ud de representaciones 2D a 3D, en las que\ud se dispone de información de color y textura\ud además.\ud Toda esta información puede tener dos\ud claras aplicaciones: la obtención de\ud modelos virtuales realistas de las ciudades,\ud de claro valor urbanístico y constituir\ud la información clave para actuación a\ud nivel de edificio (catalogación, proyectos\ud de rehabilitación,...).Peer ReviewedPostprint (published version
Antes de comenzar un proyecto de rehabilitación de un monumento tiene que estar disponible su información. Actualmente, existen diferentes técnicas que permiten obtener datos 3D con un nivel de precisión alto y con tiempos de ejecución realmente optimizados. Este artículo muestra el trabajo llevado a cabo para generar la información gráfi ca más completa posible (alzados, planta, secciones y modelos 3D) para el proyecto de rehabilitación de la tumba de la reina Elisenda en el Monasterio de Pedralbes, Barcelona (España). Para ello se han utilizado diferentes técnicas de captura de datos espaciales (láser de barrido, fotogrametría y topografía). Estos datos permitirán el análisis y posible planteamiento del proceso de reconstrucción del monumento. Así mismo se plantea la comparación entre los resultados obtenidos para los modelos de los elementos empleando fotogrametría digital e instrumentos láser escáner. IntroducciónActualmente existen muchas téc-nicas para obtener documentación métrica precisa de elementos del patrimonio cultural. Esta información es esencial para realizar proyectos de rehabilitación.Entre las técnicas más utilizadas encontramos la fotogrametría digital y el láser escáner terrestre (TLS, Terrestrial Laser Scanner), en ambos casos con el apoyo de la topografía. Varios autores (Demir et al, 2004; Yastikli, 2007) muestran que la integración de ambas proporciona las mejores soluciones para obtener información tridimensional del patrimonio.Ambos métodos comparten los mismos problemas por lo que se refiere a la oclusión, precisión geomé-trica, tamaño de los modelos obtenidos (que dificultan su gestión), extracción de líneas características, etc (Demir et al., 2004). La estereofotogrametría de objeto cercano se ha utilizado ampliamente para la obtención de modelos 3D de elementos a partir de fotografías (Remondino y El-Hakim, 2006; Yilmaz et al, 2007), ya que permite recoger tanto los datos geométricos como información de textura y color. En aquellos casos en los que la superficie del objeto puede considerarse plana es suficiente una rectificación de la imagen para obtener la documentación métrica. Pero cuando trabajamos con un objeto volumétrico, es necesario realizar una restitución que permita la vectorización 3D y la obtención del modelo digital de superficie (MDS) a través de un proceso semiautomáti-co o automático (Yastikli, 2007) por correlación de imágenes (Schenk, 1999). Uno de los subproductos de este proceso es la ortofotografía, obtenida después de la eliminación de los efectos de las distorsiones de lente, la inclinación y el desplazamiento debido al relieve, para lo que es necesario disponer del MDS además de los parámetros de la cámara.El láser escáner terrestre es una buena alternativa o complemento a la fotogrametría. En este caso, el objeto es barrido con un rayo láser siguiendo las posiciones de una rejilla de resolución definida por el usuario obteniéndose las coordenadas 3D (XYZ en el sistema de coordenadas del sensor) de todos los nodos de esa rejilla (Bradshaw, 1999; Pavlid...
ABSTRACT:When an urban development is planned the cartography of this territory is necessary, in the same way before starting a project to rehabilitate a monument the graphic information about it has to be available. At present, different techniques are available which allow to obtain three-dimensional models with a different accuracy level and runtimes. This paper shows the work carried out to obtain the graphic information and three-dimensional models that are necessary for the rehabilitation project of the tomb of Queen Elisenda in the Monastery of Pedralbes, Barcelona (Spain). This monument has the peculiarity of being symmetrical about the wall separating monastery church and the cloister. To do this, different techniques have been used that allow us to obtain an accurate model and as complete as possible, for the analysis of the construction process of the monument. In order to achieve the complete architectural survey the integration of laser scanning and photogrammetric data, and CAD models has been necessary. Due to the detail of the sculptures and the Queen's sarcophagus two sensors, with different resolution, range and accuracy, have been used to obtain the laser scanning data. Stereo pairs have been taken to obtain the 3D model of these elements to complete the model and obtain an ortophotography. In this way, a comparative analysis of both techniques has been carried out, in order to decide which one is the suitable for certain application. This investigation has been restricted to the tomb, in the two symmetrical parts of the monument.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.