IntroduçãoO desenvolvimento de novas tecnologias, processos construtivos e materiais de construção tem fomentado a construção de edificações cada vez mais esbeltas e econômicas. Porém, a carência de mão de obra especializada, a alta competitividade do setor e/ou a busca por maiores lucros por meio da redução dos custos de produção têm interferido negativamente na qualidade das habitações produzidas no Brasil nos últimos anos.É comum encontrar construções com níveis de degradação superior aos desejados com problemas relacionados à qualidade e à durabilidade devido a falhas de execução e ao aparecimento de manifestações patológicas, o que afeta a estética, a segurança, a usabilidade e a vida útil das edificações.Visando à melhoria da qualidade dos produtos da indústria da construção como um todo, entrou em vigor, em 2013, a "Norma de Desempenho" (ABNT NBR 15575, 2013) que estabelece parâmetros mínimos de desempenho 1 para os sistemas construtivos, bem como para as edificações habitacionais, de modo a atender as necessidades e exigências dos usuários ao longo do ciclo de vida da habitação, atuando de forma complementar com o conjunto de normas prescritivas da ABNT vigentes e já difundidas na comunidade da construção.1. Comportamento em uso.
Resumo Para estruturas de concreto armado, a proteção das armaduras é fator fundamental para atingir o desempenho, e isso se dá através da qualidade do concreto e da espessura do cobrimento. Pesquisas apontam negligências quanto à especificação do cobrimento e a ineficácia dos procedimentos de execução. Como resultado, espessuras inadequadas são cada vez mais recorrentes. A falta de clareza das normas de execução quanto à distribuição dos espaçadores para obtenção do cobrimento projetado contribui para o agravamento da situação. Esta pesquisa consiste em um estudo de caso com diferentes distribuições entre espaçadores para a armadura positiva em lajes (padrão de obra e espaçamentos controlados de 20 cm, 40 cm, 60 cm e 80 cm). Tem-se como objetivo comparar as espessuras de cobrimento antes e depois da concretagem, associá-las à vida útil normativa e avaliar se as normas de projeto e execução são suficientes para auxiliar na obtenção do cobrimento. Constatou-se que o cobrimento mínimo para garantir a vida útil de projeto não é totalmente alcançado, porém o controle de execução e um método de disposição dos espaçadores influenciam significativamente a obtenção do cobrimento, sendo a distribuição entre espaçadores de 40 cm a que obteve melhor desempenho entre os espaçamentos avaliados.
Given that the durability of structures is directly related to the thickness of the cover to reinforcement, it is essential to ensure minimum cover is achieved when building a structure. However, studies show that this is not always the case. One of the reasons for the this problem is the lack of indication, in structural projects, of the positioning of spacers. This situation is compounded by the lack of standards and regulations on the use of spacers (i.e. minimum quantities and required layout). This study assesses three different spacer distances and two different tying distances in order to examine the influence of these factors in the cover to reinforcement. To achieve so, three slabs were prepared in situ using different arrangements. After demoulding, cover thickness was determined using a digital covermeter. It was observed that the factors investigated have a significant influence in the final cover.
The aim of this study is to assess the strength controlling parameters of a sandy soil (Botucatu residual soil (BRS)) treated with industrial by-products (basaltic powdered rock (PR) or coal fly ash (FA)) and lime, as well as to show that the porosity/volumetric lime content (η/Lv) plays a fundamental role in the assessment of the target strength. The controlling parameters evaluated were addition of industrial wastes, quantity of lime, porosity and η/Lv. The unconfined compressive strength (qu) increased non-linearly with the amount of lime and decreased with porosity for all studied mixtures. Similar equations were found relating qu to η/(Lv)0·12 for BRS–lime, BRS-PR–lime and BRS-FA–lime mixtures. Tests of potential reactivity of siliceous materials with alkalis on the materials studied indicated that the higher amount of dissolved silica in the alkaline environment of the FA, when compared with the BRS and the PR, was responsible for increasing the number of reactions with the lime and consequently increasing the strength for BRS (25% FA)–lime mixtures, when compared to BRS–lime and BRS (25% PR)–lime blends.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.