No abstract

Optical reflectance of vitrinite is one of the fundamental physical properties that have been used for the study of coal and carbonaceous materials. Organic matter in coals and carbonaceous matter consists mainly of aromatic lamellae, whose dimensions and spatial orientation define its internal structure. Various reflectance parameters describe well the average degree of order of the molecular structure of organic matter. Moreover, reflectance A C C E P T E D M A N U S C R I P T ACCEPTED MANUSCRIPTGood correlations were found between the reflectance parameters studied and structural factors obtained by comparative methods. The reflectance parameters examined proved to be very sensitive to any changes of the structural order of coals and carbonaceous materials and seem to be a perfect complement to structural studies made by X-ray diffraction or Raman spectroscopy.

This article concerns the study of polymer composites with anthracite fillers of various structural order. Raw Svierdlovski anthracite of turbostratic structure and the anthracite thermally treated at 2,000°C of graphite‐like structure were used as fillers of low‐molecular‐weight diglycidyl ether of bisphenol A cross‐linked with aliphatic amine. Two anthracites of extremely different structures were compared to natural graphite that is composed of well‐ordered graphene sheets. Systematic studies of the influence of the structure of anthracite filler on the curing behavior, morphology, dynamic mechanical thermal properties, and thermal stability of epoxy composite were performed. It was found that the structure of anthracite filler affects the cross‐linking reactions of the epoxy matrix as well as the morphology of the composites and their viscoelastic properties. Raw anthracite added to epoxy matrix had a visible effect on the activation energy and differential scanning calorimeter parameters of the curing process, in contrast to the epoxy matrix modified with anthracite heated at 2,000°C. On the contrary, the effect of anthracite on dynamic mechanical behavior of composites is more evident when the anthracite prepared at 2,000°C was used as a filler. POLYM. COMPOS., 36:336–347, 2015. © 2014 Society of Plastics Engineers

Polysiloxane networks with the ability to modify their topology as supports for platinum heterogeneous catalysts.