Abstract:The Terrain Observation with Progressive Scans (TOPS) acquisition mode of Sentinel-1A provides a wide coverage per acquisition and features a repeat cycle of 12 days, making this acquisition mode attractive for surface subsidence monitoring. A few studies have analyzed wide-coverage surface subsidence of Wuhan based on Sentinel-1A data. In this study, we investigated wide-area surface subsidence characteristics in Wuhan using 15 Sentinel-1A TOPS Synthetic Aperture Radar (SAR) images acquired from 11 April 2015 to 29 April 2016 with the Small Baseline Subset Interferometric SAR (SBAS InSAR) technique. The Sentinel-1A SBAS InSAR results were validated by 110 leveling points at an accuracy of 6 mm/year. Based on the verified SBAS InSAR results, prominent uneven subsidence patterns were identified in Wuhan. Specifically, annual average subsidence rates ranged from −82 mm/year to 18 mm/year in Wuhan, and maximum subsidence rate was detected in Houhu areas. Surface subsidence time series presented nonlinear subsidence with pronounced seasonal variations. Comparative analysis of surface subsidence and influencing factors (i.e., urban construction, precipitation, industrial development, carbonate karstification and water level changes in Yangtze River) indicated a relatively high spatial correlation between locations of subsidence bowl and those of engineering construction and industrial areas. Seasonal variations in subsidence were correlated with water level changes and precipitation. Surface subsidence in Wuhan was mainly attributed to anthropogenic activities, compressibility of soil layer, carbonate karstification, and groundwater overexploitation. Finally, the spatial-temporal characteristics of wide-area surface subsidence and the relationship between surface subsidence and influencing factors in Wuhan were determined.

No abstract

The aim of this study was to investigate the relationship between surface subsidence and groundwater changes. To investigate this relationship, we first analyzed surface subsidence. This paper presents the results of a case study of surface subsidence in Beijing from 1 August 2007 to 29 September 2010. The Multi-temporal Interferometric Synthetic Aperture Radar (multi-temporal InSAR) technique, which can simultaneously detect point-like stable reflectors (PSs) and distributed scatterers (DSs), was used to retrieve the subsidence magnitude and distribution in Beijing using 18 ENVISAT ASAR images. The multi-temporal InSAR-derived subsidence was verified by leveling at an accuracy better than 5 mm/year. Based on the verified multi-temporal InSAR results, a prominent uneven subsidence was identified in Beijing. Specifically, most of the subsidence velocities in the downtown area were within 10 mm/year, and the largest subsidence was detected in Tongzhou, with velocities exceeding 140 mm/year. Furthermore, Gravity Recovery and Climate Experiment (GRACE) data were used to derive the groundwater change series and trend. By comparison with the multi-temporal InSAR-derived subsidence results, the long-term decreasing trend between groundwater changes and surface subsidence showed a relatively high consistency, and a significant impact of groundwater changes on the surface subsidence was identified. Additionally, the spatial distribution of the subsidence funnel was partially consistent with that of groundwater depression, i.e., the former possessed a wider range than the latter. Finally, the relationship between surface subsidence and groundwater changes was determined.

No abstract

ABSTRACT:Understanding the law of mining surface dynamic subsidence plays an important role in protecting the villages and other infrastructures against subsidence damage and disturbance. Unfortunately, the existed methods are mostly based on a few sparse leveling measurements, the accuracy and reliability of which are degraded when the feature points of the leveling measurements are lost in the processing of subsidence evolution. This paper presents a method to analysing the law of mining surface dynamic subsidence by fusing interferometric synthetic aperture radar (InSAR) and leveling measurements. By comparing the fitted results obtained by fusing InSAR/leveling and those only by independent leveling, it is shown that the InSAR/levelling fusion not only can make up the deficiency when the leveling measurements lost the feature points of dynamic subsidence, but also can improve the accuracy and reliability of results.