In this paper, characterization of the orientation of a microcrack is quantitatively investigated using the directivity of second harmonic radiated by the secondary sound source (SSS) induced by the nonlinear interaction between an incident ultrasonic transverse wave (UTW) and a microcrack. To this end, a two-dimensional finite element (FE) model is established based on the bilinear stress–strain constitutive relation. Under the modulation of contact acoustic nonlinearity (CAN) to the incident UTW impinging on the microcrack examined, the microcrack itself is treated as a SSS radiating the second harmonic. Thus, the directivity of the second harmonic radiated by the SSS is inherently related to the microcrack itself, including its orientation. Furthermore, the effects of the stiffness difference between the compressive and tensile phases in the bilinear stress–strain model, and the UTW driving frequency, as well as the radius of the sensing circle on the SSS directivity are discussed. The FE results show that the directivity pattern of the second harmonic radiated by the SSS is closely associated with the microcrack orientation, through which the microcrack orientation can be characterized without requiring a baseline signal. It is also found that the SSS directivity varies sensitively with the driving frequency of the incident UTW, while it is insensitive to the stiffness difference between the compressive and tensile phases in the bilinear stress–strain model and the radius of the sensing circle. The results obtained here demonstrate that the orientation of a microcrack can be characterized using the directivity of the SSS induced by the interaction between the incident UTW and the microcrack.
It is known that the nonlinear interaction between closed cracks and primary elastic waves can lead to the generation of a second-harmonic component. In this work, the temporal S0-mode Lamb wave and closed-crack-interaction-induced second harmonic (abbr. closed-crack-induced second harmonic, CCISH) Lamb waves that were extracted for closed-crack characterization through a weighted and structured sparse decomposition (WSSD) algorithm. A 3D finite-element model of a thin aluminum plate based on the bilinear stiffness model is established to numerically study the nonlinear interaction between closed cracks and primary Lamb waves. Under S0-mode Lamb wave excitation, the temporal S0-mode CCISH signals are extracted from the original response using the pulse-inversion technique and a band-pass filter. A dictionary, whose columns are the normalized predicted CCISH waveforms generated by the proposed analytical CCISH generation and propagation model, is built to sparsely decompose the extracted array CCISH signals using adaptive weights. Images are generated using sparse coefficients to define the pixel values after solving the WSSD problem. Closed cracks with different locations and orientations are simulated, and imaging results show that the proposed method can characterize their location and orientation but not their length from the generated images.
This paper investigates an effective method for measuring the thickness of highly attenuating materials using the acoustic radiation-induced quasi-static component (QSC) of a primary longitudinal wave (PLW) at high frequency. The generated QSC features lower attenuation than the high-frequency PLW, so the generated QSC pulse with zero carrier frequency can propagate a longer distance at the same group velocity, even in highly attenuating materials. In addition, the method based on the QSC of a high-frequency PLW has better directivity than the low-frequency PLW-based method, making it more suitable for highly attenuated material local thickness measurement. The thickness of highly attenuating materials can be accurately measured by measuring the pulse-echo time-of-flight of the generated QSC pulse using an ultrasound pulse-echo technique. The experimental examinations conducted for highly attenuating silicone rubber blocks with different thicknesses demonstrate that their thicknesses can be accurately measured with the QSC-based method. This paper provides an effective method for thickness measurements of highly attenuating materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.