Jointed rocks are typical examples of heterogeneous materials with joints. e existence of joints influences the physical properties of rock mass and propagation of fractures, which can affect production operations in engineering. A series of simulations is performed to understand the failure patterns and fracture propagation behavior of jointed rocks in hydraulic fracturing. ree points, that is, dip-angle joint, joint strength, and complex joints, are considered in the simulations. Results demonstrate three basic kinds of hydraulic fractures on jointed rock, namely, along the joint, across the joint, and partly along the joint and partly across the joint. e maximum principal stress is the control factor of fracture propagation in global scale, and the joint plane is the control factor of fracture propagation in local scale. In the propagation path, when the dip angle is small or the joint is weak, the fracture propagates along the joint; otherwise, the fracture propagates across the joint. In the multijoint interconnection models, hydraulic fractures propagate along joints in the tensile stress regions near the propagating fracture tip without dip angle limitation. Subsequently, the fractures connect with one another to form a complex fracture network based on the joint morphology.
Considering a typical steel pipe pile-supported wharf as the research object, finite element analytical models of batter and vertical pile structures were established under the same construction site, service, and geological conditions to investigate the seismic dynamic damage characteristics of vertical and batter pile-supported wharf structures. By the numerical simulation and the nonlinear time history response analysis of structure system and the moment-axial force relation curve, we analyzed the dynamic damage characteristics of the two different structures of batter and vertical piles under different seismic ground motions to provide reasonable basis and reference for designing and selecting a pile-supported wharf structure. Results showed that the axial force of batter piles was dominant in the batter pile structure and that batter piles could effectively bear and share seismic load. Under the seismic ground motion with peak ground acceleration (PGA) of 350 Gal and in consideration of the factors of the design requirement of horizontal displacement, the seismic performance of the batter pile structure was better than that of the vertical pile structure. Under the seismic ground motion with a PGA of 1000 Gal, plastic failure occurred in two different structures. The contrastive analysis of the development of plastic damage and the absorption and dissipation for seismic energy indicated that the seismic performance of the vertical pile structure was better than that of the batter pile structure.
A two-step fracturing method is proposed to investigate the hydraulic fracture evolution behavior and the process of complex fracture network formation under multiple wells. Simulations are conducted with Rock Failure Process Analysis code. Heterogeneity and permeability of the rocks are considered in this study. In Step 1, the influence of an asymmetric pressure gradient on the fracture evolution is simulated, and an artificial structural plane is formed. The simulation results reflect the macroscopic fracture evolution induced by mesoscopic failure; these results agree well with the characteristics of the experiments. Step 2, which is based on the first step, investigates the influence of preexisting fractures (i.e., artificial structural planes) on the subsequent fracturing behavior. The simulation results are supported by mechanics analysis. Results indicated that the fracture evolution is influenced by pressure magnitude on a local scale around the fracture tip and by the orientation and distribution of pore pressure on a global scale. The constant pressure in wellbore H2 can affect fracture propagation by changing the water flow direction, and the hydraulic fractures will propagate to the direction of higher local pore pressure. Furthermore, the artificial structural planes influence the stress distribution surrounding the wellbores and the hydraulic fracture evolution by altering the induced stresses around the preexisting fractures. Finally, fracture network is formed among the artificial structural planes and hydraulic fractures when multiple wells are fractured successively. This study provides valuable guidance to unconventional reservoir reconstruction designs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.