In the 2015 review paper ‘Petawatt Class Lasers Worldwide’ a comprehensive overview of the current status of high-power facilities of ${>}200~\text{TW}$ was presented. This was largely based on facility specifications, with some description of their uses, for instance in fundamental ultra-high-intensity interactions, secondary source generation, and inertial confinement fusion (ICF). With the 2018 Nobel Prize in Physics being awarded to Professors Donna Strickland and Gerard Mourou for the development of the technique of chirped pulse amplification (CPA), which made these lasers possible, we celebrate by providing a comprehensive update of the current status of ultra-high-power lasers and demonstrate how the technology has developed. We are now in the era of multi-petawatt facilities coming online, with 100 PW lasers being proposed and even under construction. In addition to this there is a pull towards development of industrial and multi-disciplinary applications, which demands much higher repetition rates, delivering high-average powers with higher efficiencies and the use of alternative wavelengths: mid-IR facilities. So apart from a comprehensive update of the current global status, we want to look at what technologies are to be deployed to get to these new regimes, and some of the critical issues facing their development.

We experimentally demonstrated a passively mode-locked femtosecond laser by using a graphene-based saturable absorber mirror (graphene SAM) in the spectral region of 2 μm. The graphene SAM was fabricated by transferring chemical-vapor-deposited, high-quality, and large-area graphene on a highly reflective plane mirror. Stable mode-locked laser pulses as short as 729 fs were obtained with a repetition rate of 98.7 MHz and an average output power of 60.2 mW at 2018 nm.

No abstract

With the proposal of dual-wavelength pumping (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 μm have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphorus (BP), BP is a promising candidate for saturable absorber near 3.5 μm. Here, we fabricated a 3.5-μm saturable absorber mirror (SAM) by transferring BP flakes onto a Au-coated mirror. With the as-prepared BP SAM, we realized Q-switching and mode-locking operations in the DWP Er:ZBLAN fiber lasers at 3.5 μm. To the best of our knowledge, it is the first time to achieve passively Q-switched and mode-locked pulses in 3.5 μm spectral region. The research results will not only promote the development of 3.5-μm pulsed fiber lasers but also open the photonics application of two-dimensional materials in this spectral region.

Quasi-parametric chirped pulse amplification (QPCPA) is a new scheme that enables the amplification of chirped signal pulses without back conversion by depleting the idler pulses. In this paper, we present a numerical study on the bandwidth, efficiency, and robustness of QPCPA. Self-locked phase among the interacting waves is found to be the underlying mechanism for the suppression of back conversion, which allows signal efficiency approaching to the quantum limit even under the phase-mismatch condition, and thus greatly increases the phase-mismatch tolerance of QPCPA. We demonstrate that QPCPA can break through the trade-off between the efficiency and bandwidth encountered in conventional optical parametric amplification, hence supporting highly efficient amplification of few-cycle pulses.

We have demonstrated a diode-pumped passively mode-locked femtosecond Nd,Y:CaF2 disordered crystal laser for the first time to our knowledge. By choosing appropriate Y-doping concentration, a broad fluorescence linewidth of 31 nm has been obtained from the gain linewidth-variable Nd,Y:CaF2 crystal. With the Nd,Y:CaF2 disordered crystal as gain medium, the mode-locked laser generated pulses with pulse duration as short as 103 fs, average output power of 89 mW, and repetition rate of 100 MHz. To our best knowledge, this is the shortest pulse generated from Nd-doped crystal lasers so far. The research results show that the Nd,Y:CaF2 disordered crystal will be a potential alternative as gain medium of repetitive chirped pulse amplification for high-peak-power lasers.

We have experimentally demonstrated a highly efficient diode-pumped Tm:YAG ceramic laser operating at 2 μm wavelength. The maximum output power of 6.05 W was realized with a slope efficiency as high as 65%. As far as we know, it is the highest slope efficiency reported for Tm:YAG ceramic laser. The wavelength tuning experiment of Tm:YAG ceramic laser was carried out and the results suggest that Tm:YAG ceramic laser could operate simultaneously at multiple wavelengths in a wide range of 1884-2017 nm.

No abstract