High hydrostatic pressure (HHP) is now well known as a nonthermal processing technology and becoming increasingly acknowledged. However, it has not been widely applied to shell seafood due to its uncertain influence on its quality and shelling property. This study could provide valuable information regarding the shelling efficacy, physicochemical properties, and microstructure of razor clam treated by HHP. And it demonstrated that HHP showed a positive impact on quality of razor clam treated by HHP.

High pressure processing (HPP), as nonthermal processing technology, has the potential to increase the drying rate due to its improvement of heat and mass exchange in different processes. In this study, the moisture migration in shrimps during HPP‐vacuum‐freeze drying (HPP‐VFD) processes has been monitored by using low‐field nuclear magnetic resonance and magnetic resonance image (MRI) in comparison with hot air‐drying and VFD. Based on the T2 relaxation spectra, three water fractions corresponding to bound water (hydrogen‐bonded water), immobile water (water trapped by organization structure or cell member), and free water were observed. For group B, with increasing drying time (4 to 22 hr), the transverse relaxation times of T21, T22, and T23 were significantly decreased (76.79%, 57.78%, and 40.9%) (P < 0.05). The content of immobile water (A22) and free water (A23) decreased (81.55% and 89.07%), whereas the bound water (A21) increased (7.26%). In comparison with group B, the T21, T22, and T23 of group C showed greater decrease (83.12%, 87.12%, and 89.57% for group C) so that HPP pretreatment could shorten the relaxation time. MRI analysis further proved that HPP‐VFD drying has improved drying efficiency, and moisture migration was from the exterior to the interior part with increasing drying time. SEM analysis demonstrated that no significant damage of muscle fibers with narrower gaps was observed for groups B and C. Overall, HPP, as a pretreatment technology, could accelerate the moisture migration and improve the drying efficiency of VFD process for shrimp. Practical Application High pressure processing (HPP) is now well known as a nonthermal processing technology and becoming increasingly acknowledged. However, there is limited information about its application in shrimp‐drying process and the moisture dynamic of shrimp subjected to high pressure processing‐assisted vacuum‐freeze drying. This study could provide valuable information regarding the moisture status and migration in HPP‐VFD shrimp monitored by LF‐NMR and MRI methods. The results showed that HPP processing at 550 MPa for 10 min can be used as an interesting method for drying pretreatment, increasing its drying rate and consequently reducing its process time, and it demonstrated that the methods used in this study had good correlation coefficient with physicochemical properties of shrimp, which may be real‐time and nondestructive monitoring methods for shrimp‐drying process.

The rapid development of the aviation industry has put forward higher and higher requirements for material properties, and the research on smart material structure has also received widespread attention. Smart materials (e.g., piezoelectric materials, shape memory materials, and giant magnetostrictive materials) have unique physical properties and excellent integration properties, and they perform well as sensors or actuators in the aviation industry, providing a solid material foundation for various intelligent applications in the aviation industry. As a popular smart material, piezoelectric materials have a large number of application research in structural health monitoring, energy harvest, vibration and noise control, damage control, and other fields. As a unique material with deformation ability, shape memory materials have their own outstanding performance in the field of shape control, low-shock release, vibration control, and impact absorption. At the same time, as a material to assist other structures, it also has important applications in the fields of sealing connection and structural self-healing. Giant magnetostrictive material is a representative advanced material, which has unique application advantages in guided wave monitoring, vibration control, energy harvest, and other directions. In addition, giant magnetostrictive materials themselves have high-resolution output, and there are many studies in the direction of high-precision actuators. Some smart materials are summarized and discussed in the above application directions, aiming at providing a reference for the initial development of follow-up related research.

No abstract

No abstract