BackgroundLignocellulose is one of the most promising alternative feedstocks for glutamic acid production as commodity building block chemical, but the efforts by the dominant industrial fermentation strain Corynebacterium glutamicum failed for accumulating glutamic acid using lignocellulose feedstock.ResultsWe identified the existence of surprisingly high biotin concentration in corn stover hydrolysate as the determining factor for the failure of glutamic acid accumulation by Corynebacterium glutamicum. Under excessive biotin content, induction by penicillin resulted in 41.7 ± 0.1 g/L of glutamic acid with the yield of 0.50 g glutamic acid/g glucose. Our further investigation revealed that corn stover contained 353 ± 16 μg of biotin per kg dry solids, approximately one order of magnitude greater than the biotin in corn grain. Most of the biotin remained stable during the biorefining chain and the rich biotin content in corn stover hydrolysate almost completely blocked the glutamic acid accumulation. This rich biotin existence was found to be a common phenomenon in the wide range of lignocellulose biomass and this may be the key reason why the previous studies failed in cellulosic glutamic acid fermentation from lignocellulose biomass. The extended recording of the complete members of all eight vitamin B compounds in lignocellulose biomass further reveals that the major vitamin B members were also under the high concentration levels even after harsh pretreatment.ConclusionsThe high content of biotin in wide range of lignocellulose biomass feedstocks and the corresponding hydrolysates was discovered and it was found to be the key factor in determining the cellulosic glutamic acid accumulation. The highly reserved biotin and the high content of their other vitamin B compounds in biorefining process might act as the potential nutrients to biorefining fermentations. This study creates a new insight that lignocellulose biorefining not only generates inhibitors, but also keeps nutrients for cellulosic fermentations.Electronic supplementary materialThe online version of this article (10.1186/s13068-018-1132-x) contains supplementary material, which is available to authorized users.

Background Lignocellulose biomass contains high amount of biotin and resulted in an excessive biotin condition for cellulosic glutamic acid accumulation by Corynebacterium glutamicum . Penicillin or ethambutol triggers cellulosic glutamic acid accumulation, but they are not suitable for practical use due to the fermentation instability and environmental concerns. Efficient glutamic acid production from lignocellulose feedstocks should be achieved without any chemical inductions. Results An industrial strain C. glutamicum S9114 was metabolically engineered to achieve efficient glutamic acid accumulation in biotin-excessive corn stover hydrolysate. Among the multiple metabolic engineering efforts, two pathway regulations effectively triggered the glutamic acid accumulation in lignocellulose hydrolysate. The C-terminal truncation of glutamate secretion channel MscCG (ΔC110) led to the successful glutamic acid secretion in corn stover hydrolysate without inductions. Then the α-oxoglutarate dehydrogenase complex (ODHC) activity was attenuated by regulating odhA RBS sequence, and glutamic acid accumulation was further elevated for more than fivefolds. The obtained C. glutamicum XW6 strain reached a record-high titer of 65.2 g/L with the overall yield of 0.63 g/g glucose using corn stover as the starting feedstock without any chemical induction. Conclusions Metabolic engineering method was successfully applied to achieve efficient glutamic acid in biotin-rich lignocellulose hydrolysate for the first time. This study demonstrated the high potential of glutamic acid production from lignocellulose feedstock. Electronic supplementary material The online version of this article (10.1186/s13068-019-1428-5) contains supplementary material, which is available to authorized users.

No abstract

Background Lignocellulose provides the only practical carbohydrates feedstock for sustainable bioproduction of hydrocarbons as future alternative of fossil fuels. Production of hydrocarbons from lignocellulose is achieved by a biorefinery process chain including pretreatment to breakdown the crystalline structure for cellulase-catalyzed hydrolysis, detoxification of inhibitory compounds generated during pretreatment, enzymatic hydrolysis to fermentable monosaccharide sugars, and fermentation to hydrocarbon products. The major barriers on fermentative production of hydrocarbons from lignocellulose include two aspects: one is the inherent stress of pretreatment-derived inhibitors on microbial cells, the other is the toxicity of hydrocarbons to cell membranes. The microbial cell factory should be tolerant to both inhibitor stress and hydrocarbons toxicity. Results Corynebacterium glutamicum was selected as the starting strain of hydrocarbons synthesis since it is well adapted to lignocellulose hydrolysate environment. The dual hydrocarbon synthesis pathways were constructed in an industrial C. glutamicum S9114 strain. The first pathway was the regular one in microalgae composed of fatty acyl-acyl carrier protein (fatty acyl-ACP) reductase (AAR) and aldehyde deformylating oxygenase (ADO) with fatty acyl-ACP as precursor. The second pathway was the direct decarboxylation of free fatty acid by fatty acid decarboxylase (OleT) using the rich fatty acids from the disruption of the transcriptional regulator fasR gene. The transmembrane transportation of hydrocarbon products was avoided by secretively expressing the fatty acid decarboxylase (OleT) to the extracellular space. The hydrocarbons generation from glucose reached 29.2 mg/L, in which the direct decarboxylation pathway contributed more than 70% of the total hydrocarbons generation, and the AAR–ADO pathway contributed the rest 30%. Conclusion The dual hydrocarbon synthesis pathways (OleT and AAR–ADO pathways) were constructed in the inhibitors tolerant C. glutamicum S9114 strain for hydrocarbon production using lignocellulose feedstock as the starting feedstock. When corn stover was used for hydrocarbons production after dry acid pretreatment and biodetoxification, the hydrocarbons generation reached 16.0 mg/L. This study provided a new strategy for hydrocarbons synthesis using microbial cell factory suitable for lignocellulose feedstock.