It is urgent to explore cost-effective, high-efficiency, and durable electrocatalysts for electrochemical water splitting due to the rapidly increasing energy consumption. In this work, we successfully synthesize Ca-doped CuCoO2 nanosheets (CCCO-P NSs) with different Ca2+ dopants (such as 3, 5, and 10 atom %) by a surfactant-modified hydrothermal reaction with polyvinylpyrrolidone (PVP) addition. The oxygen evolution reaction (OER) performances of these CCCO-P NSs in 1.0 M KOH are investigated. An optimal nickel foam supported CCCO-P2 NSs (Ni@CCCO-P2, 5 atom % Ca-doped) electrode requires low overpotential of 470 mV to afford the current density of 10 mA cm–2 and small Tafel slope of 96.5 mV dec–1. Furthermore, the Ni@CCCO-P2 electrode displays outstanding long-term stability during the galvanostatic OER electrolysis for 18 h with a little degradation of 32 mV. The improvement of OER performances for CCCO-P2 NSs could be attributed to their higher active surface area, more active sites (Co vacancies defect and Co3+/Co4+ redox pairs), and higher electrical conductivity. This work highlights the joint effect of surfactant and Ca doping for preparing CuCoO2 with nanosheet-like morphology and porous crystal structure, which is favorable for enhancing their OER performance.

The size of CCCaO nanosheets decreased with increasing Ca dopant concentration, due to Ca2+ substitution on the Cu+ site in CCO nanocrystals.

CuCoO2 nanoplates were prepared through the solvothermal method at 140 °C using ZIF-67 as the Co precursor for the first time.