The selection and design of modern high-performance structural engineering materials is driven by optimizing combinations of mechanical properties such as strength, ductility, toughness, elasticity and requirements for predictable and graceful (non-catastrophic) failure in service. Highly processable bulk metallic glasses (BMGs) are a new class of engineering materials and have attracted significant technological interest. Although many BMGs exhibit high strength and show substantial fracture toughness, they lack ductility and fail in an apparently brittle manner in unconstrained loading geometries. For instance, some BMGs exhibit significant plastic deformation in compression or bending tests, but all exhibit negligible plasticity (<0.5% strain) in uniaxial tension. To overcome brittle failure in tension, BMG-matrix composites have been introduced. The inhomogeneous microstructure with isolated dendrites in a BMG matrix stabilizes the glass against the catastrophic failure associated with unlimited extension of a shear band and results in enhanced global plasticity and more graceful failure. Tensile strengths of approximately 1 GPa, tensile ductility of approximately 2-3 per cent, and an enhanced mode I fracture toughness of K(1C) approximately 40 MPa m(1/2) were reported. Building on this approach, we have developed 'designed composites' by matching fundamental mechanical and microstructural length scales. Here, we report titanium-zirconium-based BMG composites with room-temperature tensile ductility exceeding 10 per cent, yield strengths of 1.2-1.5 GPa, K(1C) up to approximately 170 MPa m(1/2), and fracture energies for crack propagation as high as G(1C) approximately 340 kJ m(-2). The K(1C) and G(1C) values equal or surpass those achievable in the toughest titanium or steel alloys, placing BMG composites among the toughest known materials.
The mechanical properties of bulk metallic glasses (BMGs) and their composites have been under intense investigation for many years, owing to their unique combination of high strength and elastic limit. However, because of their highly localized deformation mechanism, BMGs are typically considered to be brittle materials and are not suitable for structural applications. Recently, highlytoughened BMG composites have been created in a Zr-Ti-based system with mechanical properties comparable with highperformance crystalline alloys. In this work, we present a series of low-density, Ti-based BMG composites with combinations of high strength, tensile ductility, and excellent fracture toughness.R ecent progress in ductile-phase-reinforced bulk metallic glass (BMG) composites has demonstrated that with proper design and microstructural control enhanced toughness and tensile ductility can be achieved in 2-phase alloys with a glassy matrix phase that exhibits large glass-forming ability (GFA) (1,2). This work has opened potential structural applications for BMG composites that are not possible in monolithic BMGs, because of shear localization and subsequent catastrophic failure during unconfined loading (2). Although the problems associated with unlimited extension of shear bands and the resulting catastrophic failure seen in monolithic BMGs can be mitigated by adding soft crystalline inclusions to the glass, current BMG matrix composites that exhibit this structure are based on the relatively dense element zirconium (1-4). Reducing the cost and density of current Zr-based composites is beneficial for the commercialization of these new alloys. Low-density components with high toughness and strength could be particularly useful in the aerospace and aeronautics industry as replacements for some crystalline titanium alloy hardware.With this motivation, the current work explores Ti-based (in both weight and atomic percentage) BMG matrix composites with mechanical properties and low density matching or surpassing those of common engineering titanium alloys. Herein, we report BMG composites composed of 42-62 weight percentage (wt%) titanium, with densities ranging from 4.97 to 5.15 g/cm 3 , and all exhibiting at least 5% tensile ductility. We vary the volume fraction of the glass phase from 20% to 70%, investigate aluminum additions to lower density, and report 1 alloy with Ͻ1.0 wt% of beryllium. The current work demonstrates that Ti-based BMG composites are competitive with conventional titanium alloys for some structural applications where high strength and toughness are a necessity.Ti-based, ductile-phase-reinforced matrix composites have been the subject of significant recent research (5)(6)(7)(8)(9)(10)(11)(12)(13)(14). In other systems, nano-crystalline composites have been reported that display significant compressive plasticity (15)(16)(17)(18)(19). These alloys are designed in a similar manner to BMG-matrix composites with the significant difference being that the continuous matrix material is comprised of a nanostruct...
Time-dependent plastic deformation behavior of nanocrystalline (nc) and coarse grained (cg)CoCrFeMnNi high-entropy alloys (HEAs) was systematically explored through a series of spherical nanoindentation creep experiments. High-pressure torsion (HPT) processing was performed for achieving nc microstructure in the HEA, leading to a reduction in grain size from ~ 46 μm for the as-cast state to ~ 33 nm at the edge of HPT disks after 2 turns.Indentation creep tests revealed that creep deformation indeed occurs in both cg and nc HEAs even at room temperature and it is more pronounced with an increase in strain. The creep stress exponent, n, was estimated as ~3 for cg HEA and ~1 for nc HEA and the predominant creep mechanisms were investigated in terms of the values of n and the activation volumes.Through theoretical calculations and comparison of the creep strain rates for nc HEA and a conventional face-centered-cubic nc metal (Ni), the influence of sluggish diffusion on the creep resistance of nc HEA was analyzed. In addition, sharp indentation creep tests were performed for comparison purposes and the results confirmed that the use of a spherical indenter is clearly more appropriate for investigating the creep behavior of this HEA.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.