Intrachain charge transport is unique to conjugated polymers distinct from inorganic and small molecular semiconductors and is key to achieving high-performance organic electronics. Polymer backbone planarity and thin film morphology sensitively modulate intrachain charge transport. However, simple, generic nonsynthetic approaches for tuning backbone planarity and the ensuing multiscale assembly process do not exist. We first demonstrate that printing flow is capable of planarizing the originally twisted polymer backbone to substantially increase the conjugation length. This conformation change leads to a marked morphological transition from chiral, twinned domains to achiral, highly aligned morphology, hence a fourfold increase in charge carrier mobilities. We found a surprising mechanism that flow extinguishes a lyotropic twist-bend mesophase upon backbone planarization, leading to the observed morphology and electronic structure transitions.

No abstract

Charge transport in conjugated polymer semiconductors has traditionally been thought to be limited to a low-mobility regime by pronounced energetic disorder. Much progress has recently been made in advancing carrier mobilities in field-effect transistors through developing low-disorder conjugated polymers. However, in diodes these polymers have to date not shown much improved mobilities, presumably reflecting the fact that in diodes lower carrier concentrations are available to fill up residual tail states in the density of states. Here, we show that the bulk charge transport in low-disorder polymers is limited by water-induced trap states and that their concentration can be dramatically reduced through incorporating small molecular additives into the polymer film. Upon incorporation of the additives we achieve space-charge limited current characteristics that resemble molecular single crystals such as rubrene with high, trap-free SCLC mobilities up to 0.2 cm 2 /Vs and a width of the residual tail state distribution comparable to k B T .

Electroluminescent (EL) devices operating at alternating current (AC) electricity have been of great interest due to not only their unique light emitting mechanism of carrier generation and recombination but also their great potential for applications in displays, sensors, and lighting. Despite great success of AC–EL devices, most device properties are far from real implementation. In particular, the current state-of-the art brightness of the solution-processed AC–EL devices is a few hundred candela per square meter (cd m–2) and most of the works have been devoted to red and white emission. In this manuscript, we report extremely bright full color polymer AC–EL devices with brightness of approximately 2300, 6000, and 5000 cd m–2 for blue (B), green (G), and red (R) emission, respectively. The high brightness of blue emission was attributed to individually networked multiwalled carbon nanotubes (MWNTs) for the facile carrier injection as well as self-assembled block copolymer micelles for suppression of interchain nonradiative energy quenching. In addition, effective FRET from a solution-blended thin film of B-G and B-G-R fluorescent polymers led to very bright green and red EL under AC voltage, respectively. The solution-processed AC–EL device also worked properly with vacuum-free Ag paste on a mechanically flexible polymer substrate. Finally, we successfully demonstrated the long-term operation reliability of our AC–EL device for over 15 h.

Simultaneous sensing and visualization of pressure provides a useful platform to obtain information about a pressurizing object, but the fabrication of such interactive displays at the single-device level remains challenging. Here, we present a pressure responsive electroluminescent (EL) display that allows for both sensing and visualization of pressure. Our device is based on a two-terminal capacitor with six constituent layers: top electrode/insulator/hole injection layer/emissive layer/electron transport layer/bottom electrode. Light emission upon exposure to an alternating current field between two electrodes is controlled by the capacitance change of the insulator arising from the pressure applied on top. Besides capacitive pressure sensing, our EL display allows for direct visualization of the static and dynamic information of position, shape, and size of a pressurizing object on a single-device platform. Monitoring the pressurized area of an elastomeric hemisphere on a device by EL enables quantitative estimation of the Young's modulus of the elastomer, offering a new and facile characterization method for the mechanical properties of soft materials.