Successfully commercialized poly(ethylene oxide) (PEO)based solid polymer batteries (SPBs) are expected to continuously play a key role in the next generation of high-energy density lithium-ion battery technologies. However, the introduction of high-voltage cathodes, accompanied by safety concerns such as PEO decomposition and the associated gas release, is worthy of more attention. This study employs in situ DEMS to study the gassing behavior of LiCoO 2 |PEO-LiTFSI|Li SPBs. The experiments, together with theory calculations, reveal that a surface catalytic effect of LiCoO 2 is the root cause of the unexpected H 2 gas release of PEO-based SPBs at 4.2 V. The surface coating of LiCoO 2 with a stable solid electrolyte Li 1.4 Al 0.4 Ti 1.6 (PO 4 ) 3 (LATP) can mitigate such a surface catalytic effect and therefore extend the stable working voltage to >4.5 V. The crossover effect of HTFSI, which is generated at the cathode side due to oxidation/dehydration of PEO and reacts with lithium at the anode side, is proposed to explain the H 2 generation behavior.

Poly(ethylene oxide) (PEO)-based solid electrolytes are expected to be exploited in solid-state batteries with high safety. Its narrow electrochemical window, however, limits the potential for high voltage and high energy density applications. Herein the electrochemical oxidation behavior of PEO and the failure mechanisms of LiCoO 2 -PEO solid-state batteries are studied. It is found that although for pure PEO it starts to oxidize at a voltage of above 3.9 V versus Li/Li + , the decomposition products have appropriate Li + conductivity that unexpectedly form a relatively stable cathode electrolyte interphase (CEI) layer at the PEO and electrode interface. The performance degradation of the LiCoO 2 -PEO battery originates from the strong oxidizing ability of LiCoO 2 after delithiation at high voltages, which accelerates the decomposition of PEO and drives the self-oxygen-release of LiCoO 2 , leading to the unceasing growth of CEI and the destruction of the LiCoO 2 surface. When LiCoO 2 is well coated or a stable cathode LiMn 0.7 Fe 0.3 PO 4 is used, a substantially improved electrochemical performance can be achieved, with 88.6% capacity retention after 50 cycles for Li 1.4 Al 0.4 Ti 1.6 (PO 4 ) 3 coated LiCoO 2 and 90.3% capacity retention after 100 cycles for LiMn 0.7 Fe 0.3 PO 4 . The results suggest that, when paired with stable cathodes, the PEO-based solid polymer electrolytes could be compatible with high voltage operation.

No abstract

Solid state lithium batteries are widely accepted as promising candidates for next generation of various energy storage devices with the probability to realize improved energy density and superior safety performances. However, the interface between electrode and solid electrolyte remain a key issue that hinders practical development of solid state lithium batteries. In this review, we specifically focus on the interface between solid electrolytes and prevailing cathodes. The basic principles of interface layer formation are summarized and three kinds of interface layers can be categorized. For typical solid state lithium batteries, a most common and daunting challenge is to achieve and sustain intimate solid-solid contact. Meanwhile, different specific issues occur on various types of solid electrolytes, depending on the intrinsic properties of adjacent solid components. Our discussion mostly involves following electrolytes, including solid polymer electrolyte, inorganic solid oxide and sulfide electrolytes as well as composite electrolytes. The effective strategies to overcome the interface instabilities are also summarized. In order to clarify interfacial behaviors fundamentally, advanced characterization techniques with time, and atomic-scale resolution are required to gain more insights from different perspectives. And recent progresses achieved from advanced characterization are also reviewed here. We highlight that the cooperative characterization of diverse advanced characterization techniques is necessary to gain the final clarification of interface behavior, and stress that the combination of diverse interfacial modification strategies is required to build up decent cathode-electrolyte interface for superior solid state lithium batteries.

No abstract

Lithium metal is an ideal anode material due to its high specific capacity and low redox potential. However, issues such as dendritic growth and low Coulombic efficiency prevent its application in secondary lithium batteries. The use of three-dimensional (3D) porous current collector is an effective strategy to solve these problems. Herein, commercial carbon nanotube (CNT) sponge is used as a 3D current collector for dendrite-free lithium metal deposition to improve the Coulombic efficiency and the cycle stability of the lithium metal batteries. The high specific surface area of the CNT increases the density of the lithium nucleation sites and ensures the uniform lithium deposition while the "pre-lithiation" behavior of the porous CNT enhances its affinity with the deposited lithium. Meanwhile, the lithium plating/stripping on the sponge maintains high Coulombic efficiency and high cycling stability due to the robust structure of graphitic-amorphous carbon composite in the ether-based electrolyte. Our findings exhibit the feasibility of using CNT sponge as a 3D porous current collector for lithium deposition. They shed light on designing and developing advanced current collectors for the lithium metal electrode and will promote the commercialization of the secondary lithium batteries.

No abstract

No abstract