We demonstrate the inscription of fiber Bragg gratings by 193 nm ArF excimer laser in microfibers drawn from the standard single mode telecommunication fiber. Fiber Bragg gratings are directly inscribed in a series of microfibers with diameter ranged from tens of μm to 3.3 μm without hydrogen loading or other treatment to photosensitize the microfibers. Four reflection peaks are observed where three correspond to high order mode resonances. The resonance wavelength depends on the fiber diameter and it sharply blueshifts as the diameter is decreased below 10 μm. The gratings are characterized for their response to ambient refractive index. The higher order mode resonance exhibits higher sensitivity to refractive index.

We demonstrate an ultrasensitive refractive-index (RI) sensor utilizing the polarimetric interference of a rectangular silica microfiber. The measured sensitivity is as high as 18,987 nm/RIU (refractive-index unit) around the RI of 1.33, which is 1 order of magnitude higher than that of the previously reported microfiber devices. Theoretical analysis reveals that such high sensitivity not only is originated from the RI-induced birefringence variation but also relies on the unique birefringence dispersion property for the rectangular microfiber. We predict that the sensitivity can be enhanced significantly when the group birefringence approaches zero.

Nucleic acid detection with label-free biosensors circumvents the need for costly fluorophore functionalization steps associated with conventional assays by utilizing optical fiber transducers. In spite of their technological prowess, however, these biosensors' sensitivity is limited by the design/configuration of their transducers. Therefore, it is imperative to integrate novel optical fiber transducers with existing label-free approaches to overcome those limitations. Herein, we present a high sensitivity label-free fiber optic biosensor that employs polarimetric interference of a high-birefringence (Hi-Bi) microfiber to specifically detect DNA molecules. A slight target DNA concentration change is converted into an optical wavelength shift of polarimetric interference generated by the microfiber Sagnac interferometer. The sensor provides a log-linear response to target ssDNA concentrations range from 100 pM to 1 μM and a minimum detectable concentration of 75 pM.

A Mach-Zehnder interferometer (MZI) composed by a pair of long period gratings (LPGs) fabricated in silica microfiber for sensing applications is demonstrated. Each LPG is fabricated with a pulsed CO2 laser by creating six periodical deformations along fiber length with only one scanning cycle. The length of the MZI can reach as short as 8.84 mm when the diameter of the microfiber is 9.5 μm. Compared with the ones fabricated in single-mode fibers, the present MZI is much shorter owing to the large effective-index difference between the fundamental and higher order modes. The microfiber MZI exhibits a sensitivity to surrounding refractive index (RI) of 2225 nm per refractive index unit and the temperature sensitivity of only 11.7 pm/°C. Theoretical analysis suggests that the performances of the MZI sensor can be improved by using thinner microfibers with a diameter down to 3.5 μm: The sensitivity can be greatly enhanced due to the stronger evanescent-field interaction and reduced dispersion factor; the transmission dips become narrower which benefits high-resolution measurement; the thinner fiber also allows further reduction in device length. The present device has great potential in biochemical and medical sensing due to the advantages including easy fabrication, excellent compactness and high sensitivity.

If a metalens integrates the circular polarization (CP) conversion function, the focusing lens together with circular-polarizing lens (CPL) in traditional cameras may be replaced by a metalens. However, in terahertz (THz) band, the reported metalenses still do not obtain the perfect and strict single-handed CP, because they were constructed via Pancharatnam-Berry phase so that CP conversion contained both left-handed CP (LCP) and right-handed CP (RCP) components. In this paper, a silicon based THz metalens is constructed using dynamic phase to obtain single-handed CP conversion. Also, we can rotate the whole metalens at a certain angle to control the conversion of multi-polarization states, which can simply manipulate the focusing for incident linear polarization (LP) THz wave in three polarization conversion states, including LP without conversion, LCP and RCP. Moreover, the polarization conversion behavior is reversible, that is, the THz metalens can convert not only the LP into arbitrary single-handed CP, but also the LCP and RCP into two perpendicular LP, respectively. The metalens is expected to be used in advanced THz camera, as a great candidate for traditional CPL and focusing lens group, and also shows potential application in polarization imaging with discriminating LCP and RCP.

A miniature polarimetric interferometer with the twist of a highly-birefringent microfiber is demonstrated. Good transmission spectral characteristics, which are co-governed by the birefringence and the twist degree of the microfiber, are investigated. The structure exhibits extremely-high sensitivity of around 24,373 nm per refractive-index unit and excellent temperature stability of better than 0.005 nm/°C. Featured with compactness, reconfigurability, stability, robustness, and compatibility with other fiberized components, our device has potential in tunable filtering, sensing, multi-wavelength lasing, and etc.

No abstract

We demonstrate the bending effect of microfiber on interference fringes in a compact taper-based modal interferometer and sensitivity for refractive index (RI) measurement. For the bend curvature ranging from 0 to 0.283 mm(-1), the measured RI sensitivity distinctively increases from 342.5 nm/RIU (refractive-index unit) to 1192.7 nm/RIU around RI = 1.333 and from 3847.1 nm/RIU to 11006.0 nm/RIU around RI = 1.430, respectively. Theoretical analysis reveals that such enhancement is determined by the dispersion property of the intermodal index rather than other parameters, such as the variation of the straightforward evanescent field. The magnitude of sensitivity varies as a function of the microfiber bend curvature. Approaching a critical curvature (the intermodal-index dispersion factor approaches zero), the sensitivity is significantly enhanced, exhibiting great potential in RI sensing areas.