In order to study the dynamic response of parallel mountain tunnels under the oblique incidence of seismic waves, based on the display finite element method and using viscoelastic artificial boundary, the oblique incidence of three-way seismic waves was realized by angular incident mode. The displacement and stress distribution characteristics of the tunnel lining under different propagation angles and vibration angles of SV waves were studied. The results show that the oblique incidence of SV wave has a certain effect on the displacement of the double tunnel, the forces in the tunnel are symmetrical and the axis displacement increases with the increase of incident angle, and the vertical displacement changes greatly. The stress of the tunnel lining under the oblique incidence of the SV wave is elliptical. The peak value of the maximum principal stress appears at the maximum span on both sides, and the maximum principal stress decreases with the increase of the vibration angle. The maximum principal stress of the right tunnel is flat. The minimum principal stress of the left and right holes decreases with the increase of vibration angle, and the minimum principal stress of the left hole is 90°∼270°. The distribution of the minimum principal stress in the range is large. Mises stress increases with the increase of the incidence angle of seismic waves.
For the purpose of investigating the damage mechanism and failure characteristics of tunnel lining under the strike-slip fault movements, a three-dimensional elastoplastic finite element model was established in the present study including a railway tunnel across an active strike-slip fault. With the assistance of this numerical model, the tensile and compressive damage, plastic strain development process, and shear failure of the secondary lining at different fault plane positions were analyzed, and further, the damage laws of the secondary lining at different fault displacement and tunnel-fault intersection angles were summarized. The simulation results showed that when the maximum imposed fault displacement is 30 cm, the most unfavorable fault plane appears at the junction between the moving block and the fracture zone, and serious tensile cracks and shear failures occur on each fault rupture plane. Besides, the maximum plastic strain and compressive damage are distributed in the vault and invert. In addition, with the increase of the fault displacement, the axial strain of the secondary lining increases as well, of which the main part shows the tensile strain. Interestingly, with the decrease of the crossing angle, the axial strain gradually changes from the tensile strain to the compressive strain, which is consistent with the direction of the fault angle. Furthermore, the tensile and compressive damage of the secondary lining increases with the increase of movement distance. At the same time, the tensile damage along the tunnel ring develops, and the compressive damage propagates mainly in tunnel vault and invert. With the decrease of the crossing angle, the degree of the tensile damage in the lining reduces, as well as its range. The compressive damage area of the lining develops from the vault and inverted arch to the tunnel wall on both sides, which has a trend of penetrating the side walls on both sides. The distribution area and maximum value of the overall lining damage indices in tensile (OLDT) and overall lining damage indices in compressive (OLDC) increase with the increase of fault movement distance. With the decrease of the crossing angle, the distribution range and maximum value of OLDT decrease, and the distribution range of OLDC increases, while the maximum value basically remains the same. The research results of the present work can provide reference for the antidislocation design of railway tunnels crossing strike-slip faults.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.