Hierarchical SnO2 nanoflowers, assembled from single‐crystalline SnO2 nanosheets with high‐index (11$ \bar 3 $) and (10$ \bar 2 $) facets exposed, are prepared via a hydrothermal method using sodium fluoride as the morphology controlling agent. Formation of the 3D hierarchical architecture comprising of SnO2 nanosheets takes place via Ostwald ripening mechanism, with the growth orientation regulated by the adsorbate fluorine species. The use of Sn(II) precursor results in simultaneous Sn2+ self‐doping of SnO2 nanoflowers with tunable oxygen vacancy bandgap states. The latter further results in the shifting of semiconductor Fermi levels and extended absorption in the visible spectral range. With increased density of states of Sn2+‐doped SnO2 selective facets, this gives rise to enhanced interfacial charge transfer, that is, high sensing response, and selectivity towards oxidizing NO2 gas. The better gas sensing performance over (10$ \bar 2 $) compared to (11$ \bar 3 $) faceted SnO2 nanostructures is elucidated by surface energetic calculations and Bader analyses. This work highlights the possibility of simultaneous engineering of surface energetics and electronic properties of SnO2 based materials.

Mn alloying in SnTe increases the band gap and decreases the energy separation between the light and heavy hole valence bands, leading to a significant enhancement in the Seebeck coefficient. The maximum ZT of ~1.25 is found at 920 K for p-type SnMn0.07Te.

Fast progress in material science has led to the development of flexible and stretchable wearable sensing electronics. However, mechanical mismatches between the devices and soft human tissue usually impact the sensing performance. An effective way to solve this problem is to develop mechanically superelastic and compatible sensors that have high sensitivity in whole workable strain range. Here, a buckled sheath–core fiber‐based ultrastretchable sensor with enormous stain gauge enhancement is reported. Owing to its unique sheath and buckled microstructure on a multilayered carbon nanotube/thermal plastic elastomer composite, the fiber strain sensor has a large workable strain range (>1135%), fast response time (≈16 ms), high sensitivity (GF of 21.3 at 0–150%, and 34.22 at 200–1135%), and repeatability and stability (20 000 cycles load/unload test). These features endow the sensor with a strong ability to monitor both subtle and large muscle motions of the human body. Moreover, attaching the sensor to a rat tendon as an implantable device allowes quantitative evaluation of tendon injury rehabilitation.