We propose and experimentally demonstrate a novel full-duplex bi-directional subcarrier multiplexing (SCM)-wavelength division multiplexing (WDM) visible light communication (VLC) system based on commercially available red-green-blue (RGB) light emitting diode (LED) and phosphor-based LED (P-LED) with 575-Mb/s downstream and 225-Mb/s upstream transmission, employing various modulation orders of quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM). For the downlink, red and green colors/wavelengths are assigned to carry useful information, while blue chip is just kept lighting to maintain the white color illumination, and for the uplink, the low-cost P-LED is implemented. In this demonstration, pre-equalization and post-equalization are also adopted to compensate the severe frequency response of LEDs. Using this scheme, 4-user downlink and 1-user uplink transmission can be achieved. Furthermore, it can support more users by adjusting the bandwidth of each sub-channel. Bit error rates (BERs) of all links are below pre-forward-error-correction (pre-FEC) threshold of 3.8x 10(-3) after 66-cm free-space delivery. The results show that this scheme has great potential in the practical VLC system.
We summarize several different approaches for the realization of large capacity (>100Gb/s) fiber wireless integration system, including optical polarization-division-multiplexing (PDM) combined with multiple-input multiple-output (MIMO) reception, advanced multi-level modulation, optical multi-carrier modulation, electrical multi-carrier modulation, antenna polarization multiplexing and multi-band multiplexing. These approaches can effectively reduce the signal baud rate as well as the required bandwidth for optical and electrical devices. We also investigate the problems, such as wireless multi-path effect due to different wireless transmission distance, existing in the large capacity fiber wireless integration system. We demonstrate these problems can be effectively solved based on advanced digital-signal-processing (DSP) algorithms including classic constant modulus algorithm (CMA). Moreover, based on the combination of these approaches as well as advanced DSP algorithms, we have successfully demonstrated a 400G fiber wireless integration system, which creates a capacity record of wireless delivery and ushers in a new era of ultra-high bit rate (>400Gb/s) optical wireless integration communications at mm-wave frequencies.
We experimentally demonstrate a record 400G optical wireless integration system simultaneously delivering 2 × 112 Gb/s two-channel polarization-division-multiplexing 16-ary quadrature amplitude modulation (PDM-16QAM) signal at 37.5 GHz wireless carrier and 2 × 108 Gb/s two-channel PDM quadrature phase shift keying (PDM-QPSK) signal at 100 GHz wireless carrier, adopting two millimeter-wave (mm-wave) frequency bands, two orthogonal antenna polarizations, multiple-input multiple-output (MIMO), photonic mm-wave generation and advanced digital signal processing (DSP). In the case of no fiber transmission, the bit error ratios (BERs) for both the 112 Gb/s PDM-16QAM signal after 1.5 m wireless delivery at 37.5 GHz and the 108 Gb/s PDM-QPSK signal after 0.7 m wireless delivery at 100 GHz are below the pre-forward-error-correction (pre-FEC) threshold of 3.8 × 10(-3). To our knowledge, this is the first demonstration of a 400G optical wireless integration system in mm-wave frequency bands and also a capacity record of wireless delivery.
We experimentally demonstrate a seamlessly integrated fiber-wireless system that delivers a 108 Gb/s signal through 80 km fiber and 1 m wireless transport over free space at 100 GHz adopting polarization-division-multiplexing quadrature-phase-shift-keying (PDM-QPSK) modulation and heterodyning coherent detection. The X- and Y-polarization components of the optical PDM-QPSK baseband signal are simultaneously upconverted to 100 GHz wireless carrier by optical polarization-diversity heterodyne beating, and then independently transmitted and received by two pairs of transmitter and receiver antennas, which form a 2×2 multiple-input multiple-output wireless link. At the wireless receiver, two-stage downconversion is performed firstly in the analog domain based on balanced mixer and sinusoidal radio frequency signal, and then in the digital domain based on digital signal processing (DSP). Polarization demultiplexing is realized by the constant modulus algorithm in the DSP part at the receiver. The bit-error ratio for the 108 Gb/s PDM-QPSK signal is less than the pre-forward-error-correction threshold of 3.8×10(-3) after both 1 m wireless delivery at 100 GHz and 80 km single-mode fiber-28 transmission. To our knowledge, this is the first demonstration to realize 100 Gb/s signal delivery through both fiber and wireless links at 100 GHz.
Spectrum efficient data transmission is of key interest for high capacity optical communication systems considering the limited available bandwidth. Transmission of the high speed signal with higher-order modulation formats within the Nyquist bandwidth using coherent detection brings attractive performance advantages. However, high speed Nyquist signal generation with high order modulation formats is challenging. Electrical Nyquist pulse generation is restricted by the limited sampling rate and processor capacities of digital-to-analog convertor devices, while the optical Nyquist signals can provide a much higher symbol rate using time domain multiplexing method. However, most optical Nyquist signals are based on direct detection with simple modulation formats. Here we report the first experimental demonstration of high speed all optical Nyquist signal generation based on Sinc-shaped pulse generation and time-division multiplexing with high level modulation format and full-band coherent detection. Our experiments demonstrate a highly flexible and compatible all optical high speed Nyquist signal generation and detection scheme for future fiber communication systems.
We propose and experimentally demonstrate a W-band seamlessly-integrated fiber-wireless-fiber system enabled by photonic millimeter-wave generation and demodulation techniques, in which up to 109.6-Gb/s polarization division multiplexing quadrature phase shift keying signal can be first transmitted over 80-km single-mode fiber-28 (SMF-28), then delivered over a 2-m 2 × 2 multiple-input multiple-output wireless link at 95 GHz and finally transmitted over another 80-km SMF-28 with a bit-error ratio less than the third-generation forward-errorcorrection limitation of 2 × 10 2 . The proposed fiber-wirelessfiber integration system has throughput comparable with that of fiber-optic communication and is suited to emergency back-up communications.
IndexTerms-Fiber-wireless-fiber, W-band, photonic millimeter-wave (mm-wave) demodulation, polarization division multiplexing quadrature phase shift keying (PDM-QPSK).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.