With the development of energy science and electronic technology, interfacial thermal transport has become a key issue for nanoelectronics, nanocomposites, energy transmission, and conservation, etc. The application of thermal interfacial materials and other physical methods can reliably improve the contact between joined surfaces and enhance interfacial thermal transport at the macroscale. With the growing importance of thermal management in micro/nanoscale devices, controlling and tuning the interfacial thermal resistance (ITR) at the nanoscale is an urgent task. This Review examines nanoscale interfacial thermal transport mainly from a theoretical perspective. Traditional theoretical models, multiscale models, and atomistic methodologies for predicting ITR are introduced. Based on the analysis and summary of the factors that influence ITR, new methods to control and reduce ITR at the nanoscale are described in detail. Furthermore, the challenges facing interfacial thermal management and the further progress required in this field are discussed.
The linear and nonlinear optical properties of thin MoS2 layers exfoliated on an Au/SiO2 substrate were investigated both numerically and experimentally. It was found that the MoS2 layers with different thicknesses exhibited different colors on the gold film. The reflection spectra of the MoS2 layers with different thicknesses were calculated by using the finite-difference time-domain technique and the corresponding chromaticity coordinates were derived. The electric field enhancement factors at both the fundamental light and the second harmonic were calculated and the enhancement factors for second harmonic generation (SHG) were estimated for the MoS2 layers with different thicknesses. Different from the MoS2 layers on a SiO2/Si substrate where the maximum SHG was observed in the single-layer MoS2, the maximum SHG was achieved in the 17 nm-thick MoS2 layer on the Au/SiO2 substrate. As compared with the MoS2 layers on the SiO2/Si substrate, a significant enhancement in SHG was found for the MoS2 layers on the Au/SiO2 substrate due to the strong localization of the electric field. More interestingly, it was demonstrated experimentally that optical data storage can be realized by modifying the SHG intensity of a MoS2 layer through thinning its thickness.
Recent years have witnessed a staggering escalation in the power density of modern electronic devices. Because increasingly high power density accumulates heat, efficient heat removal has become a critical limitation for the performance, reliability, and further development of modern electronic devices. Thermal interface materials (TIMs) are widely employed between the two solid contact surfaces of heat sources and heat sinks to increase heat removal for electric devices. Composites of graphene and matrix materials are expected to be the most promising TIMs because of the remarkable thermal conductivity of graphene. Here, the recent research on the thermal properties of graphene filled polymer composite TIMs is reviewed. First, the composition of graphene filled polymer composite TIMs is introduced. Then, the synthetic methods for graphene filled polymer composite TIMs are primarily described. This study focuses on introducing the methods for improving and characterizing the thermal properties of graphene filled polymer composite TIMs. Furthermore, the challenges facing graphene filled polymer composite TIMs for thermal management applications in the modern electronic industry and the further progress required in this field are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.