Existing polar transfer alignment (TA) algorithms are designed based on linear Kalman filters (KF) to estimate misalignment angles. In the case of a large misalignment angle, these algorithms cannot be applied in order to achieve accurate TA. In this paper, a TA algorithm based on an unscented Kalman filter (UKF) is proposed to solve the problem of the large misalignment angle in the polar region. Based on a large misalignment angle, nonlinear navigation error equations, which are the UKF dynamic models, are derived under grid frames. This paper chooses the velocity plus attitude matching method as the TA matching method and errors of velocity and attitude as observations. The misalignment angle can be estimated by the designed UKF. The simulation results have demonstrated that the polar TA algorithm can be effective in improving the TA accuracy, especially when large misalignment angles occur.

Trajectory tracking is an issue of vital practical importance for manoeuvreing of marine vessels. Because of the nonlinearities of kinematics and dynamics of motion, conventional control designs, based on the assumption that the kinematics and dynamics can be linearised, are not competent for tracking application of marine vessels. A multivariable sliding mode control law is proposed for the trajectory tracking problem on the basis of nonlinear horizontal motion dynamics of a class of marine vessels, in which three degrees of freedom are concerned. Ship positions and yaw angle are simultaneously tracked. Lyapunov theory is used to prove the stability of the proposed control law. Simulation results show the validity of this method for ship trajectory tracking problem.

Integrated navigation algorithms under the grid frame have been proposed based on the Kalman filter (KF) to solve the problem of navigation in some special regions. However, in the existing study of grid strapdown inertial navigation system (SINS)/Doppler velocity log (DVL) integrated navigation algorithms, the Earth models of the filter dynamic model and the SINS mechanization are not unified. Besides, traditional integrated systems with the KF based correction scheme are susceptible to measurement errors, which would decrease the accuracy and robustness of the system. In this paper, an adaptive robust Kalman filter (ARKF) based hybrid-correction grid SINS/DVL integrated navigation algorithm is designed with the unified reference ellipsoid Earth model to improve the navigation accuracy in middle-high latitude regions for marine application. Firstly, to unify the Earth models, the mechanization of grid SINS is introduced and the error equations are derived based on the same reference ellipsoid Earth model. Then, a more accurate grid SINS/DVL filter model is designed according to the new error equations. Finally, a hybrid-correction scheme based on the ARKF is proposed to resist the effect of measurement errors. Simulation and experiment results show that, compared with the traditional algorithms, the proposed navigation algorithm can effectively improve the navigation performance in middle-high latitude regions by the unified Earth models and the ARKF based hybrid-correction scheme.

In order to improve the accuracy and reliability of micro-electro mechanical systems (MEMS) navigation systems, an orthogonal rotation method-based nine-gyro redundant MEMS configuration is presented. By analyzing the accuracy and reliability characteristics of an inertial navigation system (INS), criteria for redundant configuration design are introduced. Then the orthogonal rotation configuration is formed through a two-rotation of a set of orthogonal inertial sensors around a space vector. A feasible installation method is given for the real engineering realization of this proposed configuration. The performances of the novel configuration and another six configurations are comprehensively compared and analyzed. Simulation and experimentation are also conducted, and the results show that the orthogonal rotation configuration has the best reliability, accuracy and fault detection and isolation (FDI) performance when the number of gyros is nine.

MEMS/GPS integrated navigation system has been widely used for land-vehicle navigation. This system exhibits large errors because of its nonlinear model and uncertain noise statistic characteristics. Based on the principles of the adaptive Kalman filtering (AKF) and unscented Kalman filtering (AUKF) algorithms, an adaptive unscented Kalman filtering (AUKF) algorithm is proposed. By using noise statistic estimator, the uncertain noise characteristics could be online estimated to adaptively compensate the time-varying noise characteristics. Employing the adaptive filtering principle into UKF, the nonlinearity of system can be restrained. Simulations are conducted for MEMS/GPS integrated navigation system. The results show that the performance of estimation is improved by the AUKF approach compared with both conventional AKF and UKF.

Navigation is a precondition for ocean space vehicles to work safely in polar regions. The traditional polar algorithms employ the grid strapdown inertial navigation system (SINS) as the backbone and Doppler velocity log (DVL) output velocity as measurements to constitute the integrated navigation system, of which, however, the position errors still accumulate with time. The ultra-short baseline (USBL) position system can provide position information that can be used to improve the performance of the SINS/DVL integrated system. Therefore, a grid SINS/DVL/USBL integrated algorithm for polar navigation is proposed in this paper. In order to extend the availability of the USBL and improve integration accuracy in polar regions, the USBL observation model is established based on the relative position measurement firstly. Then, a grid SINS/DVL/USBL integrated algorithm is proposed to fuse the information of these sensors with a modified Kalman filter (MKF) dealing with the sparse USBL output. Finally, a vector fault detection method, which takes the measurements as detection objects instead of the filter, is designed to locate the measurement fault and can be employed by the centralized filter to improve the fault-tolerant. Simulation and experiment results show that the proposed grid SINS/DVL/USBL integrated navigation system can further restrain SINS errors especially the position errors effectively. Meanwhile, the vector fault detection method can detect and isolate the fault measurements of centralized filter immediately and accurately. Therefore, the proposed fault-tolerant grid SINS/DVL/USBL integrated navigation algorithm can improve the reliability and accuracy of polar navigation for ocean space application.

This paper presents modification of Radial Basis Function Artificial Neural Network (RBF ANN)-based temperature compensation models for Interferometric Fiber Optical Gyroscopes (IFOGs). Based on the mathematical expression of IFOG output, three temperature relevant terms are extracted, which include: (1) temperature of fiber loops; (2) temperature variation of fiber loops; (3) temperature product term of fiber loops. Then, the input-modified RBF ANN-based temperature compensation scheme is established, in which temperature relevant terms are transferred to train the RBF ANN. Experimental temperature tests are conducted and sufficient data are collected and post-processed to form the novel RBF ANN. Finally, we apply the modified RBF ANN based on temperature compensation model in two IFOGs with temperature compensation capabilities. The experimental results show the proposed temperature compensation model could efficiently reduce the influence of environment temperature on the output of IFOG, and exhibit a better temperature compensation performance than conventional scheme without proposed improvements.

In providing acceptable navigational solutions, Location-Based Services (LBS) in land navigation rely mostly on integration of Global Positioning System (GPS) and Inertial Navigation System (INS) measurements for accuracy and robustness. The GPS/INS integrated system can provide better land-navigation solutions than the ones any standalone system can provide. Low-cost Inertial Measurement Units (IMUs), based on Microelectromechanical Systems (MEMS) technology, revolutionized the land-navigation system by virtue of their low-cost miniaturization and widespread availability. However, their accuracy is strongly affected by their inherent systematic and stochastic errors, which depend mainly on environmental conditions. The environmental noise and nonlinearities prevent obtaining optimal localization estimates in Land Vehicular Navigation (LVN) while using traditional Kalman Filters (KF). The main goal of this paper is to effectively eliminate stochastic errors of MEMS-based IMUs. The proposed solution is divided into two main components: (1) improving noise cancellation, using advanced stochastic error models in MEMS-based IMUs based on combined Autoregressive Processes (ARP) and first-order Gauss-Markov Process (1GMP), and (2) modeling the low-cost GPS/INS integration, using a hybrid Fuzzy Inference System (FIS) and Second-Order Extended Kalman Filter (SOEKF). The results obtained show that the proposed methods perform better than the traditional techniques do in different stochastic and dynamic situations.