Self-supported nanotube arrays of sulfur-doped TiO2 on metal substrates are fabricated using electrochemical anodization and subsequent sulfidation. The nanotube arrays can serve as an efficient anode for sodium storage, enabling ultrastable cycling (retaining 91% of the 2nd capacity up to 4400 cycles) and robust rate capability (167 mA h g(-1) at 3350 mA g(-1)), remarkably outperforming any other reported TiO2 -based electrodes.

We present a general and rational approach to fabricate highly accessible and affordable sodium-ion battery anodes by engineering three-dimensional hydrogenated Na2Ti3O7 nanoarrays supported on flexible Ti substrates. The hydrogenated Na2Ti3O7 nanoarrays exhibit desirable properties for sodium storage, such as high surface area, high electrical conductivity, and Na(+) diffusivity. The as-obtained nanoarrays demonstrate remarkably stable and robust Na-storage performance when tested as binder-free anodes for sodium-ion battery. They can afford a high reversible (desodiation) capacity of 227 mAh g(-1) and retain a capacity of 65 mAh g(-1) over 10,000 continuous cycles at a high rate of 35 C. Therefore, through this synergy of array architecture and hydrogenation, it is possible to engineer numerous anodes that can reversibly store Na(+) ions in a fast and stable manner.

Sodium‐ion batteries have attracted extraordinary attention owing to their low cost and raw materials in abundance. A major challenge of practical implementation is the lack of accessible and affordable anodes that can reversibly store a substantial amount of Na ions in a fast and stable manner. It is reported that surface engineered sodium titanate (Na2Ti3O7) nanotube arrays directly grown on Ti substrates can serve as efficient anodes to meet those stringent requirements. The fabrication of the nanotube arrays involves hydrothermal growing of Na2Ti3O7 nanotubes, surface deposition of a thin layer of TiO2, and subsequent sulfidation. The resulting nanoarrays exhibit a high electrochemical Na‐storage activity that outperforms other Na2Ti3O7 based materials. They deliver high reversible capacities of 221 mAh g−1 and exhibit a superior cycling efficiency and rate capability, retaining 78 mAh g−1 at 10 C (1770 mA g−1) over 10 000 continuous cycles. In addition, the full cell consisting of Na2Ti3O7 nanotube anode and Na2/3(Ni1/3Mn2/3)O2 cathode is capable of delivering a specific energy of ≈110 Wh kg−1 (based on the mass of both electrodes). The surface engineering can provide useful tools in the development of high performance anode materials with robust power and cyclability.

Sodium-ion batteries (SIBs) offer a promise of a scalable, low-cost, and environmentally benign means of renewable energy storage. However, the low capacity and poor rate capability of anode materials present an unavoidable challenge. In this work, it is demonstrated that surface phosphorylated TiO nanotube arrays grown on Ti substrate can be efficient anode materials for SIBs. Fabrication of the phosphorylated nanoarray film is based on the electrochemical anodization of Ti metal in NH F solution and subsequent phosphorylation using sodium hypophosphite. The phosphorylated TiO nanotube arrays afford a reversible capacity of 334 mA h g at 67 mA g , a superior rate capability of 147 mA h g at 3350 mA g , and a stable cycle performance up to 1000 cycles. In situ X-ray diffraction and transmission electron microscopy reveal the near-zero strain response and robust mechanical behavior of the TiO host upon (de)sodiation, suggesting its excellent structural stability in the Na storage application.

No abstract

A strongly coupled Bi2S3@CNT hybrid is fabricated and exhibits a stable Li‐storage capacity, retaining 405 mAh g−1 over 100 cycles at a rate of 1 A g−1. More importantly, the hybrid demonstrates robust rate capability, delivering 429 and 376 mAh g–1 at high rates of 2 and 5 A g–1, thereby suggesting its great potential for advanced rechargeable battery applications.

In spite of an ongoing advancement, current popular EES systems including Li-ion batteries (LIBs), supercapacitors (SCs), and redox flow cells (RFCs) are limited by severe performance challenges of electrode materials in terms of low energy and power density as well as short durability. To mitigate the issues, carbon nanomaterials could be introduced to these EES systems, taking advantage of their unique geometry, excellent conductivity, large surface area, and intrinsic flexibility. Numerous carbon nanomaterial based EES systems, where carbon nanomaterials are adopted as either conducting additive or active electrode, have been developed and demonstrated appealing energy and power features. With the capability to enhance the structural and electrochemical properties of electrodes, carbon nanomaterials and their derivatives offer a wide range of possibilities to design advanced EES devices that can meet our growing energy and power demands in the future.A number of reviews have been published in the past few years on the application of carbon nanomaterials in EES. [5][6][7][8] However, this area is so active and new works accumulate very quickly. Therefore, it is helpful to update the new designs and outcomes. This progress report will summarize the most exciting recent (from the year 2010 onwards) advances in the application of carbon nanomaterials with different dimensions, i.e., 0D fullerene, 1D CNT, 2D graphene, and 3D assemblies of CNT and graphene, in EES systems, and highlight the new trends in the field. Besides the repetitively reviewed LIBs and SCs, this work will also deal with another important system, the RFC, which has been rejuvenated recently and is becoming increasingly vital for large scale energy storage. The recent EES applications of carbon nanomaterials will be discussed based on their dimensions. Structure and Properties of Various Nanostructured CarbonFullerenes, CNTs, and graphene all present conjugated π electron systems. The unique electronic configuration combined with geometric structure endows them with extraordinary properties, which make them superior to their competitors for specific applications such as EES. 0D FullerenesFullerene normally has a hollow sphere or ellipsoid shape. Specifically, C 60 has a cage-like fused-ring structure (truncated Carbon nanomaterials including fullerenes, carbon nanotubes, graphene, and their assemblies represent a unique type of materials in diverse formats and dimensions. They feature a large surface area, superior conductivity, fast charge transport, and intrinsic stability, which are essentially required for vari ous electrochemical energy storage (EES) systems such as Li-ion batteries, supercapacitors, and redox flow cells. The scaled-up and reliable production and assembly of carbon nanomaterials is a prerequisite for the development of carbon nanomaterial-based EES devices. In this progress report, the preparation of carbon nanostructures and the state-of-the-art applications of carbon nanomaterials with different dimensions in versatile EES...

No abstract