Chitosan and poly(vinyl alcohol) blend fibers were prepared by spinning their solution through a viscose-type spinneret at 25°C into a coagulating bath containing aqueous NaOH and ethanol. The influence of coagulation solution composition on the spinning performance was discussed, and the intermolecular interactions of blend fibers were studied by infrared analysis (IR), X-ray diffraction (XRD), and scanning electron micrograph (SEM) and by measurements of mechanical properties and water-retention properties. The results demonstrated that the water-retention properties and mechanical properties of the blend fibers increase due to the presence of PVA in the chitosan substract, and the mechanical strength of the blends is also related to PVA content and the degree of deacetylation of chitosan. The best mechanical strength values of the blend fibers, 1.82 cN/d (dry state) and 0.81 cN/d (wet state), were obtained when PVA content was 20 wt % and the degree of deacetylation of chitosan was 90.2%. The strength of the blend fibers, especially wet tenacity could be improved further by crosslinking with glutaraldehyde. The water-retention values (WRV) of the blend fibers were between 170 and 241%, obviously higher than pure chitosan fiber (120%). The structure analysis indicated that there are strong interaction and good miscibility between chitosan and poly(vinyl alcohol) molecular resulted from intermolecular hydrogen bonds.

This review focuses on the recovery of REEs from waste with ionic liquids (ILs) as dilutants and extractants to tackle the REE supply challenge.

No abstract

The production of the next generation of hypergolic, ionic-liquid-based fuels requires an understanding of the reaction mechanisms between the ionic liquid and oxidizer. We probed reactions between a levitated droplet of 1-methyl-4-amino-1,2,4-triazolium dicyanamide ([MAT][DCA]), with and without hydrogen-capped boron nanoparticles, and the nitrogen dioxide (NO) oxidizer. The apparatus exploits an ultrasonic levitator enclosed within a pressure-compatible process chamber equipped with complementary Raman, ultraviolet-visible, and Fourier-transform infrared (FTIR) spectroscopic probes. Vibrational modes were first assigned to the FTIR and Raman spectra of droplets levitated in argon. Spectra were subsequently collected for pure and boron-doped [MAT][DCA] exposed to nitrogen dioxide. By comparison with electronic structure calculations, some of the newly formed modes suggest that the N atom of the NO molecule bonds to a terminal N on the dicyanamide anion yielding [ON-NCNCN]. This represents the first spectroscopic evidence of a key reaction intermediate in the oxidation of levitated ionic liquid droplets.

No abstract

No abstract

No abstract

Ball milling of boron in an H2 atmosphere was found to result in hydrogen uptake of up to 5% by weight (36 mol %). The nature of the hydrogen binding to boron was probed by a combination of ab initio theory, IR spectroscopy, thermogravimetric analysis, and mass spectral measurements of gases evolved during sample heating. The dominant binding mode is found to be H atoms bound to B atoms in the surface layer of the particles, and the high hydrogen loading results from production of very high surface area, indicating that gaseous H2 is an effective agent promoting size reduction in milling. Hydrogen incorporated in the samples was found to be stable for at least a month under ambient conditions. Desorption is observed beginning at ∼60 °C and continuing as the temperature is increased, with broad desorption features peaking at ∼250 and ∼450 °C, and ending at ∼800 °C. Unprotected hydrogenated boron nanoparticles were found to be reactive with O2 producing a hydrated boron oxide surface layer that decomposed readily at 100 °C leading to desorption of H2O. Hydrogenated boron nanoparticles were found to promote a higher flame height in the hypergolic ignition of ionic liquids upon contact with nitric acid.