The main goal of the present paper is to provide a method of source identification. Firstly, statistically optimal near-field acoustical holography (SONAH) techniques are applied to locate sound sources with the reflected sound field. In the presence of reflection plane parallel and perpendicular to the source plane, the incoming wave and reflected waves are separated based on the acoustic superposition principle and acoustic mirror image principle to satisfy the condition of the sound sources reconstruction using SONAH. Secondly, contribution of noise source to the special field point is analyzed and noise source ranking of interior panel groups are evaluated based the proposed three step acoustic contribution method. Finally, this method is verified experimentally.
This paper presents analysis, diagnosis and disposal with a typical internal breakdown failure of the resin impregnated paper (RIP) valve side bushing in high voltage direct current (HVDC) converter transformer. Based on the analysis of fault current characteristics at the time of the RIP valve side bushing failure, and field test results of insulation parameters, a method of diagnosing typical breakdown failures of valve side bushings is proposed. Through disassembly inspection of the internal overheating and arcing traces on the failure bushing, the root cause of this typical breakdown failure is found, which is upper axial flashover along the RIP condenser/SF6 interface caused by the abnormal contact of two current-carrying conductive tubes. Temperature distribution inside the bushing with an abnormal contact resistance between the copper conductive tube and aluminum conductive tube under different load current is simulated by using the finite element method. An special device is also developed for repairing defective bushing on-site, and 75 bushings with conductive contact defects have been repaired on the premise of not pushing converter transformers away from the valve hall and even without pulling out defective bushings.
Free metal particle was a common impurity in fault DC bushing, which was produced while its operation. This paper mainly focused on analyzing the typical fault of DC bushing, morphology and motion characteristic of mental particles. A experiment platform was built to study the discharge characteristic, and the result consistently with analysis was obtained. The mental particles would aggregate and accumulate due to the unevenly temperature distribution, and lead to distortion of electric field. The location and width of mental particles would have impact on discharge characteristic. The research result could be used as structural optimization and design of DC bushings, which was worth a further study both in academic and engineering application.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.