A thermodynamic model for calculating the phosphorus distribution ratio between top-bottom combined blown converter steelmaking slags and molten steel has been developed by coupling with a developed thermodynamic model for calculating mass action concentrations of structural units in the slags, i.e., CaO-SiO 2 -MgO-FeO-Fe 2 O 3 -MnO-Al 2 O 3 -P 2 O 5 slags, based on the ion and molecule coexistence theory (IMCT). Not only the total phosphorus distribution ratio but also the respective phosphorus distribution ratio among four basic oxides as components, i.e., CaO, MgO, FeO, and MnO, in the slags and molten steel can be predicted theoretically by the developed IMCT phosphorus distribution ratio prediction model after knowing the oxygen activity of molten steel at the slag-metal interface or the Fe t O activity in the slags and the related mass action concentrations of structural units or ion couples in the slags. The calculated mass action concentrations of structural units or ion couples in the slags equilibrated or reacted with molten steel show that the calculated equilibrium mole numbers or mass action concentrations of structural units or ion couples, rather than the mass percentage of components, can present the reaction ability of the components in the slags. The predicted total phosphorus distribution ratio by the developed IMCT model shows a reliable agreement with the measured phosphorus distribution ratio by using the calculated mass action concentrations of iron oxides as presentation of slag oxidation ability. Meanwhile, the developed thermodynamic model for calculating the phosphorus distribution ratio can determine quantitatively the respective dephosphorization contribution ratio of Fe t O, CaO + Fe t O, MgO + Fe t O, and MnO + Fe t O in the slags. A significant difference of dephosphorization ability among Fe t O, CaO + Fe t O, MgO + Fe t O, and MnO + Fe t O has been found as approximately 0.0 pct, 99.996 pct, 0.0 pct, and 0.0 pct during a combined blown converter steelmaking process, respectively. There is a great gradient of oxygen activity of molten steel at the slag-metal interface and in a metal bath when carbon content in a metal bath is larger than 0.036 pct. The phosphorus in molten steel beneath the slag-metal interface can be extracted effectively by the comprehensive effect of CaO and Fe t O in slags to form 3CaOAEP 2 O 5 and 4CaOAEP 2 O 5 until the carbon content is less than 0.036 pct during a top-bottom combined blown steelmaking process.

No abstract

No abstract

BackgroundCanine distemper, caused by Canine distemper virus (CDV), is a highly contagious and fatal systemic disease in free-living and captive carnivores worldwide. Recombinase polymerase amplification (RPA), as an isothermal gene amplification technique, has been explored for the molecular detection of diverse pathogens.MethodsA real-time reverse transcription RPA (RT-RPA) assay for the detection of canine distemper virus (CDV) using primers and exo probe targeting the CDV nucleocapsid protein gene was developed. A series of other viruses were tested by the RT-RPA.Thirty-two field samples were further tested by RT-RPA, and the resuts were compared with those obtained by the real-time RT-PCR.ResultsThe RT-RPA assay was performed successfully at 40 °C, and the results were obtained within 3 min–12 min. The assay could detect CDV, but did not show cross-detection of canine parvovirus-2 (CPV-2), canine coronavirus (CCoV), canine parainfluenza virus (CPIV), pseudorabies virus (PRV) or Newcastle disease virus (NDV), demonstrating high specificity. The analytical sensitivity of RT-RPA was 31.8 copies in vitro transcribed CDV RNA, which is 10 times lower than the real-time RT-PCR. The assay performance was validated by testing 32 field samples and compared to real-time RT-PCR. The results indicated an excellent correlation between RT-RPA and a reference real-time RT-PCR method. Both assays provided the same results, and R2 value of the positive results was 0.947.ConclusionsThe results demonstrated that the RT-RPA assay offers an alternative tool for simple, rapid, and reliable detection of CDV both in the laboratory and point-of-care facility, especially in the resource-limited settings.

No abstract

Feline herpesvirus 1 (FHV-1), an enveloped dsDNA virus, is one of the major pathogens of feline upper respiratory tract disease (URTD) and ocular disease. Currently, polymerase chain reaction (PCR) remains the gold standard diagnostic tool for FHV-1 infection but is relatively expensive, requires well-equipped laboratories and is not suitable for field tests. Recombinase polymerase amplification (RPA), an isothermal gene amplification technology, has been explored for the molecular diagnosis of infectious diseases. In this study, an exo-RPA assay for FHV-1 detection was developed and validated. Primers targeting specifically the thymidine kinase (TK) gene of FHV-1 were designed. The RPA reaction was performed successfully at 39°C and the results were obtained within 20 min. Using different copy numbers of recombinant plasmid DNA that contains the TK gene as template, we showed the detection limit of exo-RPA was 102 copies DNA/reaction, the same as that of real time PCR. The exo-RPA assay did not cross-detect feline panleukopenia virus, feline calicivirus, bovine herpesvirus-1, pseudorabies virus or chlamydia psittaci, a panel of pathogens important in feline URTD or other viruses in Alphaherpesvirinae, demonstrating high specificity. The assay was validated by testing 120 nasal and ocular conjunctival swabs of cats, and the results were compared with those obtained with real-time PCR. Both assays provided the same testing results in the clinical samples. Compared with real time PCR, the exo-RPA assay uses less-complex equipment that is portable and the reaction is completed much faster. Additionally, commercial RPA reagents in vacuum-sealed pouches can tolerate temperatures up to room temperature for days without loss of activity, suitable for shipment and storage for field tests. Taken together, the exo-RPA assay is a simple, fast and cost-effective alternative to real time PCR, suitable for use in less advanced laboratories and for field detection of FHV-1 infection.

No abstract

BackgroundFoot-and-mouth disease (FMD), which is caused by foot-and-mouth disease virus (FMDV), is a highly contagious tansboundary disease of cloven-hoofed animals and causes devastating economic damages. Accurate, rapid and simple detection of FMDV is critical to containing an FMD outbreak. Recombinase polymerase amplification (RPA) has been explored for detection of diverse pathogens because of its accuracy, rapidness and simplicity. A visible and equipment-free reverse-transcription recombinase polymerase amplification assay combined with lateral flow strip (LFS RT-RPA) was developed to detect the FMDV using primers and LF probe specific for the 3D gene.ResultsThe FMDV LFS RT-RPA assay was performed successfully in a closed fist using body heat for 15 min, and the products were visible on the LFS inspected by the naked eyes within 2 min. The assay could detect FMDV serotypes O, A and Asia1, and there were no cross-reactions with vesicular stomatitis virus (VSV), encephalomyocarditis virus (EMCV), classical swine fever virus (CSFV), porcine reproductive and respiratory syndrome virus (PRRSV), porcine circovirus 2 (PCV2) and pseudorabies virus (PRV). The analytical sensitivity was 1.0 × 102 copies in vitro transcribed FMDV RNA per reaction, which was the same as a real-time RT-PCR. For the 55 samples, FMDV RNA positive rate was 45.5% (25/55) by LFS RT-RPA and 52.7% (29/55) by real-time RT-PCR. For the LFS RT-RPA assay, the positive and negative predicative values were 100% and 80%, respectively.ConclusionsThe performance of the LFS RT-RPA assay was comparable to real-time RT-PCR, while the LFS RT-RPA assay was much faster and easier to be performed. The developed FMDV LFS RT-RPA assay provides an attractive and promising tool for rapid and reliable detection of FMDV in under-equipped laboratory and at point-of-need facility, which is of great significance in FMD control in low resource settings.