Superoleophobicity is a phenomenon where the contact angles of various oil droplets with low surface tension on a solid surface are larger than 150°. In the past few years, there has been much growing interest in the design and application of superoleophobic surfaces. Such surfaces have great significance for both fundamental research and a variety of practical applications, including oil-repellent coatings, self-cleaning, oil/water separation, oil droplet manipulation, chemical shielding, anti-blocking, designing liquid microlens, oil capture, bioadhesion, guiding oil movement and floating on oil. Herein, we systematically summarize the recent developments of superoleophobic surfaces. This review focuses on the design, fabrication, characteristics, functions, and important applications of various superoleophobic surfaces. Although many significant advances have been achieved, superoleophobic surfaces are still in their "toddler stage" of development. The current challenges and future prospects of this fast-growing field of superoleophobicity are discussed.

A micro-/nanoscale hierarchical rough structure inspired by the underwater superaerophobicity of fish scales was fabricated by ablation of a silicon surface by a femtosecond laser. The resultant silicon surface showed superhydrophilicity in air and became superaerophobic after immersion in water. Additionally, inspired by the underwater superaerophilicity of lotus leaves, we showed that the polydimethylsiloxane surface after femtosecond laser ablation exhibits superhydrophobicity in air and becomes superaerophilic in water. The underwater superaerophobic surface showed excellent antibubble ability, whereas the underwater superaerophilic surface could absorb and capture air bubbles in a water medium. The experimental results revealed that the in-air superhydrophilic surface generally shows superaerophobicity in water and that the in-air superhydrophobic surface generally shows underwater superaerophilicity. An underwater superaerophobic porous aluminum sheet with through microholes was prepared, and this sheet was able to intercept underwater bubbles and further remove bubbles from water. In contrast, the underwater superaerophilic porous polytetrafluoroethylene sheet could allow the bubbles to pass through the sheet. We believe that these results are highly significant for providing guidance to researchers and engineers for obtaining excellent control of bubbles' behavior on a solid surface in a water medium.

A method to fabricate superoleophobic silicon surface with ultralow oil-adhesion using a femtosecond laser.

A method to realize the superhydrophobicity, controllable adhesion, anisotropic sliding, and anisotropic wetting by a femtosecond-laser-induced line-patterned PDMS surface.

Six different super-wettabilities were achieved on the same femtosecond laser ablated PDMS surface.

A one-step way to achieve smart reversible switching between the underwater superoleophobicity and underwater superoleophilicity of femtosecond laser ablated Ti materials.

A fast and single-step process is developed for the fabrication of low-cost, high-quality, and large-area concave microlens arrays (MLAs) by the high-speed line-scanning of femtosecond laser pulses. Each concave microlens can be generated by a single laser pulse, and over 2.78 million microlenses were fabricated on a 2 × 2 cm(2) polydimethylsiloxane (PDMS) sheet within 50 min, which greatly enhances the processing efficiency compared to the classical laser direct writing method. The mechanical pressure induced by the expansion of the laser-induced plasmas as well as a long resolidifing time is the reason for the formation of smooth concave spherical microstructures. We show that uniform microlenses with different diameters and depths can be controlled by adjusting the power of laser pulses. Their high-quality optical performance is also demonstrated in this work.

A bioinspired method to realize transparent underwater superoleophobic and anti-oil surfaces by a femtosecond laser treatment.