Tuning
the atomic interface configuration of noble metals (NMs)
and transition-metal oxides is an effective straightforward yet challenging
strategy to modulate the activity and stability of heterogeneous catalysts.
Herein, Pd supported on mesoporous Fe2O3 with
a high specific surface area was rationally designed and chosen to
construct the Pd/iron oxide interface. As a versatile model, the physicochemical
environments of Pd nanoparticles (NPs) could be precisely controlled
by taming the reduction temperature. The experimental and density
functional theory calculation results unveiled that the catalyst in
the support–metal interface confinement (SMIC) state showed
significantly enhanced catalytic activity and sintering resistance
for CO oxidation. The constructed Fe sites at the interfaces between
FeO
x
overlayers and Pd NPs not only provided
additional coordinative unsaturated ferrous sites for the adsorption
and activation of O2, thereby facilitating the activation
efficiency of O2, but also impressively changed the reaction
pathway of CO oxidation. As a result, the catalyst followed the Pd/Fe
dual-site mechanism instead of the classical Mars–van Krevelen
mechanism. For the catalyst in the strong metal–support interaction
(SMSI) state, its catalytic activity was seriously suppressed because
of the excessive encapsulation of the active Pd sites by FeO
x
overlayers. The present study therefore provides
detailed insights into the SMIC and SMSI in ferric oxide-supported
Pd catalysts, which could guide the preparation of highly efficient
supported catalysts for practical applications.
Mesoporous metal oxides with wide pore size, high surface area, and uniform porous structures have demonstrated excellent advantages in various fields. However, the state-of-art synthesis approaches are dominated by wet chemistry, accompanied by use of excessive solvent, and the requirement of time-consuming drying process. Herein, we report a mechanochemical solid-state route to synthesize mesoporous Al 2 O 3 (meso-Al 2 O 3 ) via aluminum isopropoxide-copolymers assembly. The obtained meso-Al 2 O 3 shows a record high surface area (∼644 m 2 g −1 ) and narrow pore size distribution (centered at ∼5 nm). Moreover, a mechanochemical nonhydrolytic sol−gel strategy is introduced to fabricate mesoporous metal (Cu, Co, Mn, Fe, Mg, Ni)-aluminum binary oxide by using anhydrous metal chlorides and aluminum isopropoxide interplay. More importantly, four or five metals-aluminum oxide complexes with abundant mesopores and single cubic crystalline phase known as high-entropy ceramics are produced. To the best of our knowledge, mesoporous high-entropy metal oxides have not been prepared before, because the high crystallization temperature would make mesopores collapse. Additionally, this high-entropy property endows (CuNiFeCoMg)O x −Al 2 O 3 with superior SO 2 -resisting performance (1000 ppm of SO 2 in N 2 at 280 °C) in the catalytic oxidation of CO compared to single CuO− Al 2 O 3 .
Developing hard carbon with a high initial Coulombic efficiency (ICE) and very good cycling stability is of great importance for practical sodium-ion batteries (SIBs). Defects and oxygen-containing groups grown along either the carbon edges or the layers, however, are inevitable in hard carbon and can cause a tremendous density of irreversible Na + sites, decreasing the efficiency and therefore causing failure of the battery. Thus, eliminating these unexpected defect structures is significant for enhancing the battery performance. Herein, we develop a strategy of applying a soft-carbon coating onto free-standing hard-carbon electrodes, which greatly hinders the formation of defects and oxygencontaining groups on hard carbon. The electrochemical results show that the soft-carbon-coated, free-standing hard-carbon electrodes can achieve an ultrahigh ICE of 94.1% and long cycling performance (99% capacity retention after 100 cycles at a current density of 20 mA g −1 ), demonstrating their great potential in practical sodium storage systems. The sodium storage mechanism was also investigated by operando Raman spectroscopy. Our sodium storage mechanism extends the "adsorption−intercalation−pore filling−deposition" model. We propose that the pore filling in the plateau area might be divided into two parts: (1) sodium could fill in the pores near the inner wall of the carbon layer; (2) when the sodium in the inner wall pores is close to saturation, the sodium could be further deposited onto the existing sodium.
Hard carbon (HC) anodes have shown extraordinary promise for sodium‐ion batteries, but are limited to their poor initial coulombic efficiency (ICE) and low practical specific capacity due to the large amount of defects. These defects with oxygen containing groups cause irreversible sites for Na+ ions. Highly graphited carbon decreases defects, while potentially blocking diffusion paths of Na+ ions. Therefore, molecular‐level control of graphitization of hard carbon with open accessible channels for Na+ ions is key to achieve high‐performance hard carbon. Moreover, it is challenging to design a conventional method to obtain HCs with both high ICE and capacity. Herein, a universal strategy is developed as manganese ions‐assisted catalytic carbonization to precisely tune graphitization degree, eliminate defects, and maintain effective Na+ ions paths. The as‐prepared hard carbon has a high ICE of 92.05% and excellent cycling performance. Simultaneously, a sodium storage mechanism of “adsorption‐intercalation‐pore filling‐sodium cluster formation” is proposed, and a clear description given of the boundaries of the pore structure and the specific dynamic process of pore filling.
Herein, in situ generation of CuCoNi nanoalloys over a high-entropy oxide Co 3 MnNiCuZnO x matrix has been employed to generate a sintering-resistant metal-oxide interface for the CO 2 hydrogenation reaction. The high-entropy Co 3 MnNiCuZnO x catalyst with a single reverse spinel structure was synthesized by a mechanochemical redox-based process and thermal treatment just at 600 °C. Interestingly, the entropy-driven force allows the exsolution and dissolution of CuCoNi alloys under reductive and oxidative recyles, which results in the dynamics confinement of the supported metals. With high temperature (500 °C) CO 2 hydrogenation as a model reaction, the restriction of CuCoNi nanoparticles over a high-entropy Co 3 MnNiCuZnO x matrix guaranteed long-term thermal stability (>100 h). In comparison, binary CoMnO x as a control catalyst deactivated in 10 h. This high-entropy stabilization may inspire a number of sintering-resistant catalysts in the near future.
Sodium‐ion oxide cathodes with triphase heterostructures have attracted intensive attention, since the sodium‐storage performance can be enhanced by utilizing the synergistic effect of different phases. However, the composite structures generally suffer from multiple irreversible phase transitions and high lattice strain because of interlayer‐gliding during the charge/discharge process. Here, the concept of strain engineering via manipulating the local chemistry of heterostructured oxide cathode is proposed to regulate the relevant physical and chemical properties, resulting in highly reversible structural evolution (P2/P3/spinel → P2/P3″/spinel) and low intrinsic stress in the potential window of 1.5–4.0 V. Also, the simple structural evolution at a relatively high cut‐off potential of 4.3 V can be detected by in situ X‐ray diffraction and other electrochemical characterization techniques during Na+ extraction/insertion. Meanwhile, the electrode exhibits a high reversible capacity (169.4 mAh g−1 at 0.2 C) and excellent rate performance from 1.5 to 4.3 V. Overall, this study reveals the mechanisms of regulating local chemistry to realize strain engineering of the cathode materials and paves the way for the further improvement of high‐performance sodium‐ion batteries.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.