Summary Recent studies have shown encouraging results using amine-coated magnetite (Fe3O4) nanoparticles to remove residual oil from produced water using a magnetic field. However, the manufacturing of magnetite nanoparticles requires an expensive coating operation, which limits the application of this technology in large-scale treatment operations. The goal of this study is to develop a simple, efficient, and economically feasible method for removing oil from produced water using nanoparticles. Iron oxide nanoparticles are biocompatible and even safely used in medical applications. This study focuses on the removal of residual oil from produced water using uncoated, recyclable, and less expensive maghemite (γ-Fe2O3) nanoparticles. These particles have shown the potential for removing oil layers from the surface of water. However, they have not been tested for their capability of removing emulsified and dissolved oil from produced water. In this study, commercial and synthesized maghemite nanoparticles were used. The maghemite nanoparticles were synthesized using the coprecipitation process. Laboratory-synthesized produced water samples with high oil concentration (1,000 ppm) were prepared by mixing medium oil with brine [1,180 ppm sodium chloride (NaCl) solution]. The nanoparticles were dispersed in 3% NaCl brine (w/w) at varying concentrations (0.31 to 5 mg/cm3) to form different nanosuspensions. Subsequently, the nanosuspensions were mixed with synthesized produced water for 10 minutes. When a magnetic field was applied to the mixture, a clear separation of the nanoparticles was observed within seconds. Residual oil in the samples was measured using nondispersive infrared spectroscopy. Oil content analysis confirmed the successful (99.9%) removal of oil from laboratory-synthesized water samples. For the real produced water samples, results showed a reduction of oil content to an undetectable level (i.e., less than 0.1 ppm). The ease of nanoparticle collection and washing after subsequent water treatments further demonstrates the feasibility of magnetic nanoparticle (MNP)-based separations for large-scale use in produced water treatment operations. The unique finding of this study is the elimination of one additional step of synthesizing (amine coating) MNPs. Direct use of uncoated maghemite nanoparticles with high oil removal efficiency can reduce produced water treatment costs and promote this technology as an economically feasible option within the industry.
Due to environmental requirements, produced water needs treatment prior to disposal or reuse. In recent years, the most successful solutions to treat produced water involve special attention to efficiency, cost, and environmentally safe treatment methods. Recent studies have shown encouraging results using amine-coated magnetite (Fe3O4) nanoparticles to remove residual oil from produced water using a magnetic field. However, the manufacturing of magnetite nanoparticles requires an expensive coating operation, which limits the application of this technology in large-scale treatment operations. The goal of this study is to develop a simple, efficient, and economically feasible method for removing oil from produced water using nanoparticles. Iron oxide nanoparticles are biocompatible and even safely used in medical applications. This study focuses on the removal of residual oil from produced water using uncoated, recyclable and less expensive maghemite (g-Fe2O3) nanoparticles. These particles have been shown the potential for removing oil layers from the surface of water. However, they have not been tested for their capability of removing emulsified and dissolved oil from produced water. In this study, commercial and synthesized maghemite nanoparticles were utilized. The maghemite nanoparticles were synthesized using the co-precipitation process. Lab-synthesized produced water samples with high oil concentration (1000 ppm) were prepared by mixing medium oil with brine (1180 ppm NaCl solution). The nanoparticles were dispersed in 3% by weight NaCl solution (3% NaCl brine) at varying concentrations (0.31 – 5 mg/mL) to form different nanosuspensions. Subsequently, the nanosuspensions were mixed with synthesized produced water for 10 min. When a magnetic field was applied to the mixture, a clear separation of the nanoparticles was observed within seconds. Residual oil in the samples was measured using non-dispersive infrared spectroscopy. Oil content analysis confirmed the successful removal of oil from the water samples. The oil content of the samples was reduced from 1000 to less than 10 ppm. For the real produced water samples, results showed a reduction of oil content to an undetectable level (i.e. less than 0.1 ppm). The ease of nanoparticle collection and washing after subsequent water treatments further demonstrates the feasibility of magnetic nanoparticle-based separations for large-scale use in produced water treatment operations. The unique finding of this study is the elimination of one additional step of synthesizing (amine coating) magnetic nanoparticles. Direct use of uncoated maghemite nanoparticles with high oil removal efficiency can reduce produced water treatment cost and promote this technology as an economically feasible option within the industry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.