LoRaWAN is one of the low power wide area network (LPWAN) technologies that have received significant attention by the research community in the recent years. It offers low-power, low-data rate communication over a wide range of covered area. In the past years, the number of publications regarding LoRa and LoRaWAN has grown tremendously. This paper provides an overview of research work that has been published from 2015 to September 2018 and that is accessible via Google Scholar and IEEE Explore databases. First, a detailed description of the technology is given, including existing security and reliability mechanisms. This literature overview is structured by categorizing papers according to the following topics: (i) physical layer aspects; (ii) network layer aspects; (iii) possible improvements; and (iv) extensions to the standard. Finally, a strengths, weaknesses, opportunities and threats (SWOT) analysis is presented along with the challenges that LoRa and LoRaWAN still face.

As LoRaWAN networks are actively being deployed in the field, it is important to comprehend the limitations of this Low Power Wide Area Network technology. Previous work has raised questions in terms of the scalability and capacity of LoRaWAN networks as the number of end devices grows to hundreds or thousands per gateway. Some works have modeled LoRaWAN networks as pure ALOHA networks, which fails to capture important characteristics such as the capture effect and the effects of interference. Other works provide a more comprehensive model by relying on empirical and stochastic techniques. This work uses a different approach where a LoRa error model is constructed from extensive complex baseband bit error rate simulations and used as an interference model. The error model is combined with the LoRaWAN MAC protocol in an ns-3 module that enables to study multi channel, multi spreading factor, multi gateway, bi-directional LoRaWAN networks with thousands of end devices. Using the lorawan ns-3 module, a scalability analysis of LoRaWAN shows the detrimental impact of downstream traffic on the delivery ratio of confirmed upstream traffic. The analysis shows that increasing gateway density can ameliorate but not eliminate this effect, as stringent duty cycle requirements for gateways continue to limit downstream opportunities.

LoRa is a long-range, low power, low bit rate and single-hop wireless communication technology. It is intended to be used in Internet of Things (IoT) applications involving battery-powered devices with low throughput requirements. A LoRaWAN network consists of multiple end nodes that communicate with one or more gateways. These gateways act like a transparent bridge towards a common network server. The amount of end devices and their throughput requirements will have an impact on the performance of the LoRaWAN network. This study investigates the scalability in terms of the number of end devices per gateway of single-gateway LoRaWAN deployments. First, we determine the intra-technology interference behavior with two physical end nodes, by checking the impact of an interfering node on a transmitting node. Measurements show that even under concurrent transmission, one of the packets can be received under certain conditions. Based on these measurements, we create a simulation model for assessing the scalability of a single gateway LoRaWAN network. We show that when the number of nodes increases up to 1000 per gateway, the losses will be up to 32%. In such a case, pure Aloha will have around 90% losses. However, when the duty cycle of the application layer becomes lower than the allowed radio duty cycle of 1%, losses will be even lower. We also show network scalability simulation results for some IoT use cases based on real data.

Recently, LoRaWAN has attracted much attention for the realization of many IoT applications because it offers low-power, long-distance and low-cost wireless communication. Recent works have shown that the LoRaWAN specification for class A devices comes with scalability limitations due to the ALOHA-like nature of the MAC layer. In this paper, we propose a synchronization and scheduling mechanism for LoRaWAN networks consisting of class A devices. The mechanism runs on top of the LoRaWAN MAC layer. A central Network Synchronization and Scheduling Entity will schedule uplink and downlink transmissions. In order to reduce the synchronization packet length, all time slots that are being assigned to an end node are encoded in a probabilistic space-efficient data structure. An end node will check if a time slot is part of the received data structure in order to determine when to transmit. Time slots are assigned based on the traffic needs of the end nodes. We show that in case of a non-saturated multi-channel LoRaWAN network with synchronization being done in a separate channel, the Packet Delivery Ratio (PDR) is easily 7% (for SF7) to 30% (for SF12) higher than in an unsynchronized LoRaWAN network. For saturated networks, the differences in PDR become more profound as nodes are only scheduled as long as they can be accommodated given the remaining capacity of the network. The synchronization process will use less than 3 mAh extra battery capacity per end node during a one year period, for synchronization periods longer than 3 days. This is less than the battery capacity used to transmit packets that are going to be lost in an unsynchronized network due to collisions.

Abstract-LoRa is a long range, low power, low bit rate, single hop wireless communication technology. It is intended to be used for Internet of Things (IoT) networks, where devices are battery powered and limited bandwidth is needed. In combination with its scalability and the low end device price, LoRa is a candidate technology for low bandwidth industrial applications with a high number of communication devices spread across large areas. The use case for this paper is taken from the flower industry, where a large number of trolleys need to communicate with a server during their movement across the auction floor area. Once trolleys are outside of the auction floor they can use the public LoRaWAN network to communicate with the server, without switching communication technology. The LoRaWAN network consists of multiple end nodes and a single gateway per cell, acting as a transparent bridge between the end nodes and the network server. The measurements show that with a single LoRa gateway we can cover an indoor area of around 34000m2 only with spreading factor 7, while for spreading factor 12 the total covered area will be even higher. Also, the area outside the factory is covered when switching to spreading factor 12. We also show that the number of nodes (trolleys) that can be served by a gateway in such a case can be as high as 6000.