We present two new models for wind turbine interaction effects and a recipe for combining them. The first model is an extension of the Park model, which explicitly incorporates turbulence, both the ambient atmospheric turbulence and the turbulence generated in the wake itself. This Turbulence Optimized Park model is better equipped to describe wake recovery over long distances such as between wind farms, where the wake expansion slows down as the turbine-generated turbulence decays. The second model is a first version of a full engineering wind farm blockage model. In the same vein as the wake model it adds blockage contributions from the individual wind turbines to form an aggregated wind farm scale blockage effect that can be incorporated directly into the park power curve and annual energy calculations. The wake model and the blockage model describe downstream and upstream turbine interaction effects, respectively. They are coupled as the outputs of one model are the inputs to the other model and vice versa. We describe how this coupling is achieved through an iterative process. We give early stage examples of the validation of the two models and discuss how they might be further validated and improved in the future.
As a complement to measurements, numerical modeling facilitates improved understanding of the complex turbulent processes in the stratocumulus-topped boundary layer (STBL). Due to limited computational resources simulations are often run at too coarse resolutions to resolve details of cloud-top turbulence and potentially in computational domains too small to account for the largest scales of boundary layer circulations. The effects of such deficiencies are not fully understood. Here the influence of resolution/ anisotropy of the computational grid and domain size in under-resolved implicit large-eddy simulation of the STBL is investigated. The performed simulations are based on data from the first research flight of the DYCOMS-II campaign. Regarding cloud cover and domain-averaged liquid water path, simulations with horizontal/vertical grid spacing of 35/5 m, 70/10 m, and 105/15 m are found to agree better with measurements than more computationally expensive simulations with isotropic grid boxes, e.g., with 10/10 m or 15/15 m grid spacing. While decreasing the vertical grid spacing allows more representative simulation of the thin, turbulent, stably stratified interfacial layer between the STBL and the free troposphere, coarsening the horizontal resolution dampens vertical velocity fluctuations in this region and mimics the observed anisotropy of stably stratified small-scale turbulence near the cloud top. The size of the computational domain is found to have almost no impact on mean cloud properties. However, increasing it from 3:533:5 km 2 to 14314 km 2 does lead to the occurrence of larger coherent updraft structures. Increasing it further to 21321 km 2 shows little or no increase in the updraft size.
Abstract. The aim of the presented study was to investigate the impact on the radiation budget of a biomass-burning plume, transported from Alaska to the High Arctic region of Ny-Ålesund, Svalbard, in early July 2015. Since the mean aerosol optical depth increased by the factor of 10 above the average summer background values, this large aerosol load event is considered particularly exceptional in the last 25 years. In situ data with hygroscopic growth equations, as well as remote sensing measurements as inputs to radiative transfer models, were used, in order to estimate biases associated with (i) hygroscopicity, (ii) variability of single-scattering albedo profiles, and (iii) plane-parallel closure of the modelled atmosphere. A chemical weather model with satellite-derived biomass-burning emissions was applied to interpret the transport and transformation pathways. The provided MODTRAN radiative transfer model (RTM) simulations for the smoke event (14:00 9 July–11:30 11 July) resulted in a mean aerosol direct radiative forcing at the levels of −78.9 and −47.0 W m−2 at the surface and at the top of the atmosphere, respectively, for the mean value of aerosol optical depth equal to 0.64 at 550 nm. This corresponded to the average clear-sky direct radiative forcing of −43.3 W m−2, estimated by radiometer and model simulations at the surface. Ultimately, uncertainty associated with the plane-parallel atmosphere approximation altered results by about 2 W m−2. Furthermore, model-derived aerosol direct radiative forcing efficiency reached on average −126 W m-2/τ550 and −71 W m-2/τ550 at the surface and at the top of the atmosphere, respectively. The heating rate, estimated at up to 1.8 K day−1 inside the biomass-burning plume, implied vertical mixing with turbulent kinetic energy of 0.3 m2 s−2.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.