PSC-efficiencies have increased with intensive effort on novel materials synthesis, film-morphology engineering, and interface control, and the state-of-the-art PSCs have eventually produced a high power conversion efficiency (PCE) of over 15%. [9][10][11][12][13][14][15][16][17][18][19][20][21] For example, Zou et al. reported a newly synthesized nonfullerene acceptor (NFA), Y6, having an electron-deficient-core-based fused ring with a benzothiadiazole unit, and the resulting single-junction PSCs based on PM6:Y6 BHJ showed an excellent efficiency of 15.7% and a certified PCE of 14.9%. [20] In addition, Hou and co-workers recently reported a series of copolymers, and in particular, the copolymer T1 (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)-benzo[1,2-b:4,5-b′] dithiophene))-alt-(5,5-(1′,3′-di-2-thienyl-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′] dithiophene-4,8-dione)] (PBDB-TF) = 0.8 and PTO2 = 0.2) produced the bestefficiency of 15.1% and certified PCE of 14.6% in PSCs using 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6,7difluoro)-indanone))-5,5,11,11-tetrakis(4hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′] dithiophene (IT-4F) acceptor. [21] One of the representative routes to further enhance PSCefficiency is broadening the absorption bandwidth of the active film for better sunlight absorption. [21][22][23] To this end, the ternary The record efficiency of the state-of-the-art polymer solar cells (PSCs) is rapidly increasing, due to the discovery of high-performance photoactive donor and acceptor materials. However, strong questions remain as to whether such high-efficiency PSCs can be produced by scalable processes. This paper reports a high power conversion efficiency (PCE) of 13.5% achieved with single-junction ternary PSCs based on PTB7-Th, PC 71 BM, and COi8DFIC fabricated by slot-die coating, which shows the highest PCE ever reported in PSCs fabricated by a scalable process. To understand the origin of the high performance of the slot-die coated device, slot-die coated photoactive films and devices are systematically investigated. These results indicate that the good performance of the slot-die PSCs can be due to a favorable moleculestructure and film-morphology change by introducing 1,8-diiodooctane and heat treatment, which can lead to improved charge transport with reduced carrier recombination. The optimized condition is then used for the fabrication of large-area modules and also for roll-to-roll fabrication. The slot-die coated module with 30 cm 2 active-area and roll-to-roll produced flexible PSC has shown 8.6% and 9.6%, respectively. These efficiencies are the highest in each category and demonstrate the strong potential of the slot-die coated ternary system for commercial applications. Photovoltaic DevicesThe ORCID identification number(s) for the author(s) of this article can be found under https://doi.Over the past few decades, solution-processed bulk-heterojunction (BHJ) polymer solar cells (PSCs) have continued to demonstrate their potential as a high-ef...
In article number 1901805, Doojin Vak, Seok‐In Na and co‐workers report a highly efficient single‐junction ternary polymer solar cell (PSC) based on PTB7‐Th, PC71BM, and COi8DFIC using slot‐die coating. This approach is readily translated into large‐area module and roll‐to‐roll processed PSCs, which produce the highest power conversion efficiency among the printing‐based PSCs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.