The vibrational velocity, sound pressure, and acoustic power on the vibrating boundary comprising an enclosed space are reconstructed by the boundary element method based on the measured field pressures. The singular value decomposition is used to obtain the inverse solution in the least-square sense and to express the acoustic modal expansion between the measurement and source fields. In general, such an inverse operation has been considered an ill-posed problem having a divergence phenomenon involved with extremely small measurement errors. The ill-conditioned nature of the acoustic inverse problem is caused by the singularity of the transfer matrix which produces nonradiating wave components. In order to minimize the singularity and to also reduce the number of measurement points, optimal measurement positions are determined by the effective independence method. Regularization methods are used to stabilize the reconstructed field by suppressing nonradiating components resulting in the singular transfer matrix. In order to enhance the resolution of the reconstructed field, the optimal regularization order for yielding the minimum mean-square error is estimated from the known measurement noise variance by virtue of the statistical analysis. A half-scaled automotive cabin is considered an example for validating and demonstrating the proposed reconstruction process. It is noted that the present method can improve the resolution of the reconstructed field; thus vibro-acoustic parameters of the vibrating boundary can be estimated in reasonably good precision.
Elastic wave propagation in a discrete random medium is studied to predict dynamic effective properties of composite materials containing spherical inclusions. A self-consistent method is proposed which is analogous to the well-known coherent potential approximation in alloy physics. Three conditions are derived that should be satisfied by two effective elastic moduli and effective density. The derived self-consistency conditions have the physical meaning that the scattering of a coherent wave by the constituents in the effective medium vanishes, on the average. The frequency-dependent effective wave speed and coherent attenuation can be obtained by solving the self-consistency conditions numerically. At the lowest resonance frequency, the phase speed increases rapidly and the attenuation reaches the maximum in the composites having a large density mismatch. The lowest resonance is caused mainly by the density mismatch between matrix and particles and higher resonances by the stiffness mismatch. The dispersion and attenuation of longitudinal and shear waves are affected by the lowest resonance much more than by higher ones. The lowest resonance frequency of particles in the effective medium is found to be higher than that of a single particle embedded in the matrix material of composites due to the stiffening effect. The results obtained from the present theory are shown to be in good agreement with previous experimental observations of Kinra et al. [Int. J. Solid Struct. 16, 301–312 (1980)]. Part of the calculated results are compared with those computed by the Waterman and Truell theory. The present theory is in better agreement with the experiments for the examples dealt with.
In this study, a new prediction method is suggested for sound transmission loss (STL) of multilayered panels of infinite extent. Conventional methods such as random or field incidence approach often given significant discrepancies in predicting STL of multilayered panels when compared with the experiments. In this paper, appropriate directional distributions of incident energy to predict the STL of multilayered panels are proposed. In order to find a weighting function to represent the directional distribution of incident energy on the wall in a reverberation chamber, numerical simulations by using a ray-tracing technique are carried out. Simulation results reveal that the directional distribution can be approximately expressed by the Gaussian distribution function in terms of the angle of incidence. The Gaussian function is applied to predict the STL of various multilayered panel configurations as well as single panels. The compared results between the measurement and the prediction show good agreements, which validate the proposed Gaussian function approach.
Although there are many analytical and empirical models for orifice impedance, the predicted acoustical performance when adopting any one of them sometimes shows a large discrepancy with the measured result in some cases. In order to obtain a new practical and precise empirical impedance model under grazing flow conditions, the acoustic impedance of circular orifices has been measured with a variation of the involved parameters under very carefully tested and controlled measurement conditions. The parameters involved in determining the acoustic impedance of an orifice are comprised of the orifice diameter, orifice thickness, perforation ratio, mean flow velocity, and frequency. The range of involved parameters is chosen to cover the practical data span of perforates in typical exhaust systems of internal combustion engines. The empirical impedance model is obtained by using nonlinear regression analysis of the various results of the parametric tests. The proposed empirical model of orifice impedance, with a very high correlation coefficient, is applied to the prediction of the transmission loss of concentric resonators, which have geometric configurations typical of acoustically short and long through-flow resonators. By comparing the measured and predicted results, in which the predictions are made by employing many previous orifice impedance models as well as the present model, it is confirmed that the proposed orifice impedance model yields the most accurate prediction among all other existing impedance models.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.