A portable, disc-based, and fully automated enzyme-linked immuno-sorbent assay (ELISA) system is developed to test infectious diseases from whole blood. The innovative laser irradiated ferrowax microvalves and centrifugal microfluidics were utilized for the full integration of microbead-based suspension ELISA assays on a disc starting from whole blood. The concentrations of the antigen and the antibody of Hepatitis B virus (HBV), HBsAg and Anti-HBs respectively, were measured using the lab-on-a-disc (LOD). All the necessary reagents are preloaded on the disc and the total process of the plasma separation, incubation with target specific antigen or antibody coated microbeads, multiple steps of washing, enzyme reaction with substrates, and the absorbance detection could be finished within 30 minutes. Compared to the conventional ELISA, the operation time was dramatically reduced from over 2 hours to less than 30 minutes while the limit of detection was kept similar; e.g. the limit of detection of Anti-HBs tests were 8.6 mIU mL(-1) and 10 mIU mL(-1) for the disc-based and the conventional ELISA respectively.

We report a fully integrated, pathogen-specific DNA extraction device utilizing centrifugal microfluidics on a polymer based CD platform. By use of the innovative laser irradiated Ferrowax microvalve (LIFM) together with the rapid cell lysis method using laser irradiation on magnetic particles, we could, for the first time, demonstrate a fully integrated pathogen specific DNA extraction from whole blood on a CD. As a model study, DNA extraction experiments from whole blood spiked with Hepatitis B virus (HBV) and E.coli were conducted. The total process of the plasma separation, mixing with magnetic beads conjugated with target specific antibodies, removal of plasma residual, washing and DNA extraction was finished within 12 min with only one manual step, the loading of 100 microL of whole blood. Real-time PCR results showed that the concentration of DNA prepared on a CD using a portable sample preparation device was as good as those by conventional bench top protocol. It demonstrates that our novel centrifugal microfluidics platform enables a full integration of complex biological reactions that require multi-step fluidic control.

Valving is critical in microfluidic systems. Among many innovative microvalves used in lab-on-a-chip applications, phase change based microvalves using paraffin wax are particularly attractive for disposable biochip applications because they are simple to implement, cost-effective and biocompatible. However, previously reported paraffin-based valves require embedded microheaters and therefore multi-step operation of many microvalves was a difficult problem. Besides, the operation time was relatively long, 2-10 s. In this paper, we report a unique phase change based microvalve for rapid and versatile operation of multiple microvalves using a single laser diode. The valve is made of nanocomposite materials in which 10 nm-sized iron oxide nanoparticles are dispersed in paraffin wax and used as nanoheaters when excited by laser irradiation. Laser light of relatively weak intensity was able to melt the paraffin wax with the embedded iron oxide nanoparticles, whereas even a very intense laser beam does not melt wax alone. The microvalves are leak-free up to 403.0 +/- 7.6 kPa and the response times to operate both normally closed and normally opened microvalves are less than 0.5 s. Furthermore, a sequential operation of multiple microvalves on a centrifugal microfluidic device using a single laser diode was demonstrated. It showed that the optical control of multiple microvalves is fast, robust, simple to operate, and requires minimal chip space and thus is well suited for fully integrated lab-on-a-chip applications.

We report a fully integrated device that can perform both multiple biochemical analysis and sandwich type immunoassay simultaneously on a disc. The whole blood is applied directly to the disposable "lab-on-a-disc" containing different kinds of freeze-dried reagents for the blood chemistry analysis as well as reagents required for the immunoassay. The concentrations of different kinds of analytes are reported within 22 min by simply inserting a disc to a portable device. Using the innovative laser irradiated ferrowax microvalves together with the centrifugal microfluidics, the total process of plasma separation, metering, mixing, incubation, washing, and detection is fully automated. The analyzer is equipped with an optical detection module to measure absorbances at 10 different wavelengths to accommodate the various kinds of reaction protocols. Compared to the conventional blood analysis done in clinical laboratories, it is advantageous for point-of-care applications because it requires a smaller amount of blood (350 μL vs. 3 mL), takes less time (22 min vs. several days), does not require specially trained operators or expensive instruments to run biochemical analysis and immunoassay separately.

Optimal detection of a pathogen present in biological samples depends on the ability to extract DNA molecules rapidly and efficiently. In this paper, we report a novel method for efficient DNA extraction and subsequent real-time detection in a single microchip by combining laser irradiation and magnetic beads. By using a 808 nm laser and carboxyl-terminated magnetic beads, we demonstrate that a single pulse of 40 seconds lysed pathogens including E. coli and Gram-positive bacterial cells as well as the hepatitis B virus mixed with human serum. We further demonstrate that the real-time pathogen detection was performed with pre-mixed PCR reagents in a real-time PCR machine using the same microchip, after laser irradiation in a hand-held device equipped with a small laser diode. These results suggest that the new sample preparation method is well suited to be integrated into lab-on-a-chip application of the pathogen detection system.