In this present investigation, the influence of reinforcing tungsten (W) particles in High-Density Polyethylene (HDPE) on mechanical and thermal properties, has been studied. W reinforced HDPE composites are processed by melt compounding method, with W varied in proportion of 1%, 3%, 5% and 7% by weight. The test specimens were prepared by injection molding as per ASTM standards and analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Mechanical and Thermal Characterization. XRD results show that, the intensity count at angle 40.3°, 58.7°, 73.6°and 87.1°increases with the increase in wt% of W particles. SEM analysis reveals that, composites containing 1wt% of W has uniform dispersion in the HDPE matrix. In mechanical characterization, tensile strength and flexural strength of the specimen reported a sharp increase with the addition of W at 1wt%, followed by a negative trend for the higher content of W particles. However, the impact strength result shows that specimen with 3wt% of W content has the highest toughness. Further from thermal characterization, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) results show that degradation temperature and the melting point of composites improve with an increase in W content. Composite with 7wt% W content has the highest degradation temperature and melting point.
Polymer matrix composites find a wide range of industrial applications due to its unique properties like lightweight, improved strength and the properties could also be tailored to suit specific applications. In this present work, a new class of polymer matrix composites with epoxy resin as matrix and tungsten metal particles as fillers were developed. The influence of the addition of tungsten fillers on mechanical and thermal properties of the composites has been investigated. The composites are fabricated by hand lay-up method and the specimens containing tungsten particle content by 1%, 3%, 5%, 7% and 9% by weight were developed. The developed specimens were subjected to mechanical and thermal investigations. Mechanical behavior was analyzed by conducting a flexural test and hardness as per ASTM standards. Thermal behavior was analyzed by conducting Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) of the developed composites. The results show that the addition of 7 wt. % filler has a higher value of flexural strength and hardness. Further addition of particulate fillers deteriorates the flexural strength and hardness due to agglomeration of filler content in the epoxy. Analysis by TGA and DSC shows that the thermal stability of composites is improved by increasing the addition of tungsten content in the epox.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.