We investigate the formation of unilamellar lipid vesicles (liposomes) with diameters of tens of nanometers by controlled microfluidic mixing and nanoparticle determination (COMMAND). Our study includes liposome synthesis experiments and numerical modeling of our microfluidic implementation of the batch solvent injection method. We consider microfluidic liposome formation from the perspective of fluid interfaces and convective-diffusive mixing, as we find that bulk fluid flow parameters including hydrodynamically focused alcohol stream width, final alcohol concentration, and shear stress do not primarily determine the vesicle formation process. Microfluidic device geometry in conjunction with hydrodynamic flow focusing strongly influences vesicle size distributions, providing a coarse method to control liposome size, while total flow rate allows fine-tuning the vesicle size in certain focusing regimes. Although microfluidic liposome synthesis is relatively simple to implement experimentally, numerical simulations of the mixing process reveal a complex system of fluid flow and mass transfer determining the formation of nonequilibrium vesicles. These results expand our understanding of the microfluidic environment that controls liposome self-assembly and yield several technological advances for the on-chip synthesis of nanoscale lipid vesicles.

We present a microfluidic method to direct the self-assembly of temperature-sensitive liposome-hydrogel hybrid nanoparticles. Our approach yields nanoparticles with structural properties and highly monodisperse size distributions precisely controlled across a broad range relevant to the targeted delivery and controlled release of encapsulated therapeutic agents. We used microfluidic hydrodynamic focusing to control the convective-diffusive mixing of two miscible nanoparticle precursor solutions (a DPPC:cholesterol:DCP phospholipid formulation in isopropanol and a photopolymerizable N-isopropylacrylamide mixture in aqueous buffer) to form nanoscale lipid vesicles with encapsulated hydrogel precursors. These precursor nanoparticles were collected off-chip and were irradiated with ultraviolet (UV) light in bulk to polymerize the nanoparticle interiors into hydrogel cores. Multiangle laser light scattering in conjunction with asymmetric flow field-flow fractionation was used to characterize nanoparticle size distributions, which spanned the approximately 150 to approximately 300 nm diameter range as controlled by microfluidic mixing conditions, with a polydispersity of approximately 3% to approximately 5% (relative standard deviation). Transmission electron microscopy was then used to confirm the spherical shape and core-shell composition of the hybrid nanoparticles. This method may be extended to the directed self-assembly of other similar cross-linked hybrid nanoparticle systems with engineered size/structure-function relationships for practical use in healthcare and life science applications.

Nanosized gel particles (nanogels) are of interest for a variety of applications, including drug delivery and single-molecule encapsulation. Here, we employ the cores of nanoscale liposomes as reaction vessels to template the assembly of calcium alginate nanogels. For our experiments, a liposome formulation with a high bilayer melting temperature (Tm) is selected, and sodium alginate is encapsulated in the liposomal core. The liposomes are then placed in an aqueous buffer containing calcium chloride, and the temperature is raised up to Tm. This allows permeation of Ca2+ ions through the bilayer and into the core, whereupon these ions gel the encapsulated alginate. Subsequently, the lipid bilayer covering the gelled core is removed by the addition of a detergent. The resulting alginate nanogels have a size distribution consistent with that of the template liposomes (ca. 120-200 nm), as confirmed by transmission electron microscopy and light scattering. Nanogels of different average sizes can be synthesized by varying the template dimensions, and the gel size can be further tuned after synthesis by the addition of monovalent salt to the solution.

Dielectrophoresis (DEP) for cell manipulation has focused, for the most part, on approaches for separation/enrichment of cells of interest. Advancements in cell positioning and immobilization onto substrates for cell culture, either as single cells or as cell aggregates, has benefited from the intensified research efforts in DEP (electrokinetic) manipulation. However, there has yet to be a DEP approach that provides the conditions for cell manipulation while promoting cell function processes such as cell differentiation. Here we present the first demonstration of a system that combines DEP with a hybrid cell adhesive material (hCAM) to allow for cell entrapment and cell function, as demonstrated by cell differentiation into neuronlike cells (NLCs). The hCAM, comprised of polyelectrolytes and fibronectin, was engineered to function as an instantaneous cell adhesive surface after DEP manipulation and to support long-term cell function (cell proliferation, induction, and differentiation). Pluripotent P19 mouse embryonal carcinoma cells flowing within a microchannel were attracted to the DEP electrode surface and remained adhered onto the hCAM coating under a fluid flow field after the DEP forces were removed. Cells remained viable after DEP manipulation for up to 8 d, during which time the P19 cells were induced to differentiate into NLCs. This approach could have further applications in areas such as cell-cell communication, three-dimensional cell aggregates to create cell microenvironments, and cell cocultures.

Liposomes with encapsulated carboxyfluorescein were used in an affinity-based assay to provide signal amplification for small-volume fluorescence measurements. Microfluidic channels were fabricated by imprinting in a plastic substrate material, poly(ethylene terephthalate glycol) (PETG), using a silicon template imprinting tool. Streptavidin was linked to the surface through biotinylated-protein for effective immobilization with minimal nonspecific adsorption of the liposome reagent. Lipids derivatized with biotin were incorporated into the liposome membrane to make the liposomes reactive for affinity assays. Specific binding of the liposomes to microchannel walls, dependence of binding on incubation time, and nonspecific adsorption of the liposome reagent were evaluated. The results of a competitive assay employing liposomes in the microchannels are presented.

Tumor cells showing a 3D morphology and in coculture with endothelial cells are a valuable in vitro model for studying cell−cell interactions and for the development of pharmaceuticals. Here, we found that HepG2 cells, unlike endothelial cells, show differences in adhesion to fibronectin alone, or in combination with poly(allylamine hydrochloride). This response allowed us to engineer micropatterned heterotypic cultures of the two cell types using microfluidics to pattern cell adhesion. The resulting cocultures exhibit spatially encoded and physiologically relevant cell function. Further, we found that the protrusive, migratory and 3D morphological responses of HepG2 are synergistically modulated by the constituents of the hybrid extracellular matrix. Treating the hybrid material with the cross-linking enzyme transglutaminase inhibited 3D morphogenesis of tumor cells. Our results extend previous work on the role of fibronectin in layer-by-layer assembled films, and demonstrate that cell-specific differences in adhesion to fibronectin can be used to engineer tumor cell cocultures.

Liposomes with encapsulated carboxyfluorescein were used in an affinity-based assay to provide signal amplification for small-volume fluorescence measurements. Microfluidic channels were fabricated by imprinting in a plastic substrate material, poly(ethylene terephthalate glycol) (PETG), using a silicon template imprinting tool. Streptavidin was linked to the surface through biotinylated-protein for effective immobilization with minimal nonspecific adsorption of the liposome reagent. Lipids derivatized with biotin were incorporated into the liposome membrane to make the liposomes reactive for affinity assays. Specific binding of the liposomes to microchannel walls, dependence of binding on incubation time, and nonspecific adsorption of the liposome reagent were evaluated. The results of a competitive assay employing liposomes in the microchannels are presented.

Methodological lessons and pilot data on the effect of proximity of homes and schools to highways on pediatric asthma and lung functionsignifi cantly correlated with a smaller FEF 25 -75 /FVC ratio (p = 0.02). Conclusions : Our fi ndings suggest that either limitations in our study design restricted our ability to see the associations reported by others or that such associations do not exist in this population. One possibility is that in this community, with heavy street traffi c and many street canyons, the gradient of exposure next to the highway is not very well delineated by simple proximity. AbstractPurpose : Numerous studies have found that either living or attending school near highways or exposure to pollutants associated with heavy motor vehicle traffi c are associated with a high prevalence of asthma and reduced lung function. Yet, few investigations have assessed school and home exposure in the same study. Methods: We recruited children aged 5 -19 years from a pediatric clinic in an urban center (Boston Chinatown) for many of whom housing and school were located immediately adjacent to two major highways. A questionnaire was used to assess selfreport of diagnosis of asthma and the proximity of schools and homes to highways, as well as basic demographic information. Spirometric lung function data were obtained and reviewed by a pediatric pulmonologist blinded to survey responses. During this review, we excluded lung function tests of low quality. Results : The analyses did not demonstrate any associations or mean differences between near-highway exposure at school, at home, or both with diagnosed asthma (p > 0.10, n = 124). For the lung function data (n = 87), neither direct measures (FEV 1 , FVC, ) nor ratio measures (FEV 1 /FVC and FEF 25 -75 /FVC) had a signifi cant association with near-highway exposure (p > 0.10). Certain predisposing factors, such as diagnosed allergies and family history of asthma, were strongly associated with diagnosed asthma (p < 0.05 and p = 0.001, respectively), fi ndings we have seen consistently in other work with children recruited from the same clinic. We also found that exposure to pests was