No abstract

4.0 V aqueous LIBs of both high energy density and high safety are made possible by a new interphase formed from an ''inhomogeneous additive'' approach that effectively stabilizes graphite or lithium-metal anode materials.

Molecular dynamics simulation studies of the structure and the differential capacitance (DC) for the ionic liquid (IL) N-methyl-N-propylpyrrolidinium bis(trifluoromethane)sulfonyl imide ([pyr(13)][TFSI]) near a graphite electrode have been performed as a function temperature and electrode potential. The IL exhibits a multilayer structure that extends 20-30 Å from the electrode surface. The composition and ion orientation in the innermost layer were found to be strongly dependent on the electrode potential. While at potentials near the potential of zero charge (PZC), both cations and anions adjacent to the surface are oriented primarily perpendicular to the surface, the counterions in first layer orient increasingly parallel to the surface with increasing electrode potential. A minimum in DC observed around -1 V(RPZC) (potential relative to the PZC) corresponds to the point of highest density of perpendicularly aligned TFSI near the electrode. Maxima in the DC observed around +1.5 and -2.5 V(RPZC) are associated with the onset of "saturation", or crowding, of the interfacial layer. The asymmetry of DC versus electrode polarity is the result of strong interactions between the fluorine of TFSI and the surface, the relatively large footprint of TFSI compared to pyr(13), and the tendency of the propyl tails of pyr(13) to remain adsorbed on the surface even at high positive potentials. Finally, an observed decreased DC and the disappearance of the minimum in DC near the PZC with increasing temperature are likely due to the increasing importance of entropic/excluded volume effects (interfacial crowding) with increasing temperature.

No abstract

In this work we show that homogeneous nucleation of methane hydrate can, under appropriate conditions, be a very rapid process, achieved within tens of nanoseconds. In agreement with recent experimental results on different systems, we find that the nucleation of a gas hydrate crystal appears as a two-step process. It starts with the formation of disordered solid-like structures, which will then spontaneously evolve to more recognizable crystalline forms. This previously elusive first-stage state is confirmed to be post-critical in the nucleation process, and is characterized as processing reasonable short-range structure but essentially no long-range order. Its energy, molecular diffusion and local structure reflect a solid-like character, although it does exhibit mobility over longer (tens of ns) timescales. We provide insights into the controversial issue of memory effects in methane hydrates. We show that areas locally richer in methane will nucleate much more readily, and no 'memory' of the crystal is required for fast re-crystallization. We anticipate that much richer polycrystallinity and novel methane hydrate phases could be possible.

Electroactive interfaces distinguish electrochemistry from chemistry and enable electrochemical energy devices like batteries, fuel cells, and electric double layer capacitors. In batteries, electrolytes should be either thermodynamically stable at the electrode interfaces or kinetically stable by forming an electronically insulating but ionically conducting interphase. In addition to a traditional optimization of electrolytes by adding cosolvents and sacrificial additives to preferentially reduce or oxidize at the electrode surfaces, knowledge of the local electrolyte composition and structure within the double layer as a function of voltage constitutes the basis of manipulating an interphase and expanding the operating windows of electrochemical devices. In this work, we focus on how the molecular-scale insight into the solvent and ion partitioning in the electrolyte double layer as a function of applied potential could predict changes in electrolyte stability and its initial oxidation and reduction reactions. In molecular dynamics (MD) simulations, highly concentrated lithium aqueous and nonaqueous electrolytes were found to exclude the solvent molecules from directly interacting with the positive electrode surface, which provides an additional mechanism for extending the electrolyte oxidation stability in addition to the well-established simple elimination of "free" solvent at high salt concentrations. We demonstrate that depending on their chemical structures, the anions could be designed to preferentially adsorb or desorb from the positive electrode with increasing electrode potential. This provides additional leverage to dictate the order of anion oxidation and to effectively select a sacrificial anion for decomposition. The opposite electrosorption behaviors of bis(trifluoromethane)sulfonimide (TFSI) and trifluoromethanesulfonate (OTF) as predicted by MD simulation in highly concentrated aqueous electrolytes were confirmed by surface enhanced infrared spectroscopy. The proton transfer (H-transfer) reactions between solvent molecules on the cathode surface coupled with solvent oxidation were found to be ubiquitous for common Li-ion electrolyte components and dependent on the local molecular environment. Quantum chemistry (QC) calculations on the representative clusters showed that the majority of solvents such as carbonates, phosphates, sulfones, and ethers have significantly lower oxidation potential when oxidation is coupled with H-transfer, while without H-transfer their oxidation potentials reside well beyond battery operating potentials. Thus, screening of the solvent oxidation limits without considering H-transfer reactions is unlikely to be relevant, except for solvents containing unsaturated functionalities (such as C═C) that oxidize without H-transfer. On the anode, the F-transfer reaction and LiF formation during anion and fluorinated solvent reduction could be enhanced or diminished depending on salt and solvent partitioning in the double layer, again giving an additional tool to manipulate the ...

Hybrid aqueous/non-aqueous electrolyte (HANE) inherits the merits from both aqueous (non-flammability) and non-aqueous (high electrochemical stability) systems. Its unique assembly at the inner-Helmholtz interface leads to an interphasial chemistry that supports a 3.2 V Li 4 Ti 5 O 12 /LiNi 0.5 Mn 1.5 O 4 full aqueous Li-ion battery with performances comparable with state-of-the-art Li-ion batteries.

A water-in-salt electrolyte (WiSE) offers an electrochemical stability window much wider than typical aqueous electrolytes but still falls short in accommodating high-energy anode materials, mainly because of the enrichment of water molecules in the primary solvation sheath of Li + . Herein, we report a new strategy in which a non-Li cosalt was introduced to alter the Li + -solvation sheath structure. The presence of an asymmetric ammonium salt (Me 3 EtN•TFSI) in water increases the solubility of LiTFSI by two times, pushes the salt/water molar ratio from 0.37 in WiSE to an unprecedented value of 1.13, and significantly suppresses the water activity in both bulk electrolyte and the Li + -solvation sheath. This new 63 m (mol kg solvent −1 ) aqueous electrolyte (42 m LiTFSI + 21 m Me 3 EtN•TFSI) offers a wide potential window of 3.25 V and supports a 2.5 V aqueous Li-ion battery (LiMn 2 O 4 //Li 4 Ti 5 O 12 ) to deliver a high energy density of 145 Wh kg −1 stably over 150 cycles.