No abstract

Accurate thermodynamic parameters of thin films of materials are crucial in understanding their behavior in the nanometer scale. A new and simple method for determining the vapor pressure and thermodynamic properties of nanometer thick films of materials was developed based on UV-absorbance spectroscopy. Well-characterized benzoic acid was used to calibrate the spectrometer and the experimental conditions. The thermodynamic properties of pentaerythritol tetranitrate (PETN) were determined to validate the use of this new method. The estimated values of the thermodynamic parameters of PETN are in excellent agreement with the values reported using the most widely used Knudsen effusion method for determining vapor pressure lower than 1 pascal. The elegance of this method is its simplicity. The results indicate that UV-absorbance spectroscopy is a model-free and powerful technique in determining thermodynamic parameters in the nanoscale.

No abstract

Non-isothermal measurements of thermodynamic parameters and vapor pressures of low-volatile materials are favored when time is a crucial factor to be considered, such as in the case of detection of hazardous materials. In this article, we demonstrate that optical absorbance spectroscopy can be used non-isothermally to estimate the thermodynamic properties and vapor pressures of volatile materials with good accuracy. This is the first method to determine such parameters in nanoscale in just minutes. Trinitrotoluene (TNT) is chosen because of its low melting temperature, which makes it impossible to determine its thermodynamic parameter by other rising-temperature techniques, such as thermogravimetric analysis (TGA). The well-characterized vapor pressure of benzoic acid is used to calibrate the spectrometer in order to determine the vapor pressure of low-volatile TNT. The estimated thermodynamic properties of both benzoic acid and TNT are in excellent agreement with the literature. The estimated vapor pressure of TNT is one order of magnitude larger than that determined isothermally using the same method. However, the values are still within the range reported in the literature. The data indicate the high potential for use of rising-temperature absorbance spectroscopy in determining vapor pressures of materials at nanometer scale in minutes instead of hours or days.