Luminescent lanthanides containing coordination polymers and metal-organic frameworks hold great potential in many applications due to their distinctive spectroscopic properties. While the ability to design coordination polymers for specific functions is often mentioned as a major benefit bestowed on these compounds, the lack of a meaningful understanding of the luminescence in lanthanide coordination polymers remains a significant challenge toward functional design. Currently, the study of these compounds is based on the antenna effect as derived from molecular systems, where organic antennae are used to facilitate lanthanide-centered luminescence. This molecular-based approach does not take into account the unique features of extended network solids, particularly the formation of band structure. While guidelines for the antenna effect are well established, they require modification before being applied to coordination polymers. A series of nine coordination polymers with varying topologies and organic linkers were studied to investigate the accuracy of the antenna effect in coordination polymer systems. By comparing a molecular-based approach to a band-based one, it was determined that the band structure that occurs in aggregated organic solids needs to be considered when evaluating the luminescence of lanthanide coordination polymers.

A coordination polymer [Ln(C15H9O9)3(H2O)3]n (1-Ln = Eu(III), Tb(III)) assembled from benzophenonedicarboxylate was synthesized and characterized. The organic component is shown to sensitize lanthanide-based emission in both compounds, with quantum yields of 36% (Eu) and 6% (Tb). Luminescence of lanthanide coordination polymers is currently described from a molecular approach. This methodology fails to explain the luminescence of this system. It was found that the band structure of the organic component rather than the molecular triplet state was able to explain the observed luminescence. Deuterated (Ln(C15H9O9)3(D2O)3) and dehydrated (Ln(C15H9O9)3) analogues were also studied. When bound H2O was replaced by D2O, lifetime and emission increased as expected. Upon dehydration, lifetimes increased again, but emission of 1-Eu unexpectedly decreased. This reduction is reasoned through an unprecedented enhancement effect of the compound's luminescence by the OH/OD oscillators in the organic-to-Eu(III) energy transfer process.

Three bismuth-2,5-thiophenedicarboxylates (Bi-TDC) and two europium-2,5-thiophenedicarboxylates (Eu-TDC) were synthesized under ambient conditions. The structures were determined through single crystal X-ray diffraction, and three of the phases were further characterized by powder X-ray diffraction, Raman spectroscopy, and thermogravimetric analysis. Reactions of bismuth nitrate, 2,5-thiophenedicarboxylate, and pyridine in an acidic solution of acetic acid and ethanol yield Hpy[Bi(TDC)2(H2O)]·1.5H2O (1), whereas reactions in a water/ethanol mixture produce a minor phase, [Hpy]3[Bi2(TDC)4(HTDC)(H2O)]·xH2O (2) along with a major product, (Hpy)2[Bi(TDC)2(HTDC)]·0.36H2O (3). The structures of 1-3 are all built from anionic Bi-TDC chains that are further bridged through additional TDC linkages into interpenetrated 2D sheets. Addition of an aqueous lanthanide solution to the reaction mixtures that yielded 1 and 2-3 resulted in the formation of doped phases, Hpy[Bi1-xLnx(TDC)2(H2O)]·1.5H2O (Bi1-xLnx-1), where Ln = Nd, Sm, Eu, Tb, Dy, and Yb, and (Hpy)2[Bi0.99Eu0.01 (TDC)2(HTDC)]·0.36H2O (Bi0.99Eu0.01-3). Using europium nitrate rather than the bismuth precursor resulted in the formation of two homometallic europium based phases, [Eu(TDC)(NO3)(H2O)]n (4) and [Eu2(TDC)3(H2O)9]·5H2O (5), which adopt an extended 3D network and an interpenetrated 2D structure, respectively. Photophysical measurements were carried out for 1 and the lanthanide containing phases and quantum yield and lifetime values were determined for the visible light emitters. Herein, the structural chemistry, spectroscopic properties, and luminescence of the bismuth phases, their lanthanide doped analogs, and the europium compounds are presented.

The dissolution rate and solubility of NaBiO3 have been investigated in nitric acid systems ranging from 4 to 6 M HNO3 and were found to be 58–76 μg/cm2·d and 490–830 mM, respectively. The presence of 50 mM U­(VI) drastically increased the solubility to 540–1200 mM, while rates of dissolution were relatively unchanged. The solubility of NaBiO3 increased with an increase in U­(VI) concentrations at 4 M HNO3, with log–log analysis indicating a one-to-one complex between Bi and U and infrared spectroscopic evidence monitoring uranyl stretching, suggesting complex formation. Absorbance spectra were obtained experimentally and computationally with an absorbance band in the range of 450–600 nm that has been attributed to Bi­(V). The ingrowth and decay of Bi­(V) in solution was also studied as a function of mass of solid NaBiO3 present, acidity, and temperature. The activation energies of dissolution and decomposition were calculated to be 39 ± 4 and 61 ± 6 kJ/mol, respectively. These results indicate that dissolution of NaBiO3 into the respective Na+ and BiO3 –occurs prior to undergoing reduction, a process which conventionally has been believed to occur in the reverse order.

A new three dimensional lanthanide-containing coordination polymer assembled from 2,2′-bithiophene-5,5′-dicarboxylic acid ([Ln2(C10H4O4S2)3(H2O)6]n, Ln = Sm–Yb) was solvothermally synthesized and used as a sensor to detect nitroaromatic compounds via luminescence quenching.

The utility of recovering cocrystallized Np, Pu, and Am from a uranyl nitrate hexahydrate crystalline phase has been examined. Progressive dissolution studies were carried out on samples of either Np­(VI), Pu­(VI), or Am­(VI) cocrystallized with uranyl nitrate hexahydrate, resulting in a linear relationship between the amount of actinides dissolved as a function of volume of HNO3 added, which indicates homogeneous distribution of the transuranic species throughout the crystalline solid. The ratio of the concentration of U to the heavier actinides was maintained over the entire dissolution and mimicked that of the starting cocrystallization solution. A series of five crystallization–dissolution–recrystallization cycles of uranyl nitrate hexahydrate from nitric acid have been achieved in the presence of Am­(VI), where the behavior of Am­(VI) followed that of U­(VI) for each step of all five cycles. Negligible reduction of Am­(VI) to Am­(III) was observed between each recrystallization cycle. These results indicate the utility of a group hexavalent actinide cocrystallization approach toward used nuclear fuel recycling.

No abstract

No abstract