<p>Isolasi selulosa dari tanaman Eceng Gondok (<em>Eichornia crassipes</em>) berhasil dilakukan dengan menggunakan metode <em>bleaching</em> diikuti dengan alkalinasi. Metode <em>bleaching</em> dilakukan menggunakan NaOCl dengan pengadukan dan pemanasan suhu rendah yaitu 80 <sup>o</sup>C selama 4 jam, diikuti dengan metode alkalinasi menggunakan NaOH dengan pemanasan pada suhu rendah yaitu 45<sup> o</sup>C selama 3 jam. Penerapan metode <em>bleaching</em> dan alkalinasi ini bertujuan untuk delignifikasi dengan memutuskan rantai polimerik diantara selulosa dengan lignin atau hemiselulosa. Selain itu, proses oksidasi lanjut juga terjadi karena keberadaan HOCl dan OH<sup>-</sup> sebagai hasil peruraian NaOCl dan NaOH. Setelah pencucian hingga pH netral, hasil isolasi yang didapatkan adalah berupa serbuk putih yang secara fisis berbeda dari material awal sebelum perlakuan. Hasil rendemen berkisar 6 ─ 20% dengan penyusutan massa sebesar 80%. Analisa gugus fungsi hasil isolat dengan spektrometer Fourier Transform Infrared (FTIR) menunjukkan keberadaan serapan dari gugus hidroksil ─OH, ─C─H, =C─H, ─OH dan C=O (gugus karboksilat), C-H dan C─O, dan C─O─C pada cincin piranosa yang menguatkan keberhasilan isolasi selulosa. Berdasarkan observasi morfologi dan struktur dengan menggunakan <em>scanning electron microscope</em> (SEM), selulosa hasil isolasi berbentuk butiran kristal dengan ukuran mikrometer yang secara signifikan berbeda dari penampakan fisis serat awal sebelum perlakuan.</p><p><strong>Isolation of Cellulose Microfiber from Water Hyacinth (<em>Eichornia crassipes</em>) Waste by Bleaching</strong><strong>-Alkalization </strong><strong>Method</strong><strong>.</strong> Cellulose isolation from water hyacinth plants (Eichornia crassipes) was successfully performed using bleaching followed by alkalization methods. The bleaching method was carried out using NaOCl with stirring dan heating at a low temperature of 80 <sup>o</sup>C for 4 hours. This method was then followed by an alkalization method using NaOH with heating at a low temperature of 45 <sup>o</sup>C for 3 hours. The application of the bleaching followed by alkalization method aimed to proceed the delignification by breaking the polymeric chain between cellulose dan lignin or hemicellulose. In addition, the process of advanced oxidation also occurred due to the presence of HOCl dan OH<sup>-</sup> decomposed from NaOCl dan NaOH. The solid was then washed until the pH of the solution was neutral. As results, the white powder solid was obtained which was physically different from the initial material before treatment. The yield obtained was around 6 ─ 20% with a mass shrinkage of 80%. Analysis of the functional groups of the isolates using Fourier Transform Infrared (FTIR) spectrometers showed the presence of the hydroxyl groups ─OH, ─C─H, =C─H, ─OH dan C=O (carboxylic groups), CH dan C ─O, dan C─O─C on the pyranose ring that reinforces the success of the cellulose isolation. Based on morphological dan structural observations under a scanning electron microscope (SEM), the cellulose isolated was in crystalline granules in micrometer size which was significantly different compared to the physical appearance of the initial fiber before treatment.</p>
<p class="Keywords">Peningkatan jumlah penduduk Indonesia menjadi masalah krusial. Proyeksi Bappenas (2018), jumlah pertumbuhan penduduk Indonesia pada tahun 2018 mencapai 265 juta jiwa. Hal ini berbanding lurus dengan peningkatan kebutuhan tempat hunian di Indonesia, akibatnya lahan yang tersedia semakin berkurang, sehingga saat ini banyak dikembangkan hunian kolektif dengan pemanfaatan partisi. Namun, partisi yang dijual di pasaran saat ini masih memiliki banyak kekurangan, yaitu tidak dapat meredam suara, tidak tahan air, mudah berjamur, dan mudah terbakar. Perlu adanya partisi yang kedap suara, tahan air, bebas jamur, dan tahan api sehingga dilakukan penelitian mealui pemanfaatan cangkang <em>Pila ampullacea</em> (CPA) dan blotong tebu serta <em>coating</em> TiO<sub>2</sub> dan Al<sub>2</sub>O<sub>3</sub>. CPA dan blotong tebu memiliki potensi besar sebagai bahan pengganti material dalam pembuatan partisi karena jumlahnya yang melimpah serta ramah lingkungan. Pengujian <em>Smart</em> partisi diawali dari pembuatan formula partisi, uji fisik, dan uji kimia. Pembuatan formula <em>Smart</em>-Partisi digunakan perbandingan 5%, 10%, dan 15 % CPA dan blotong tebu. Kemudian dilakukan penambahan <em>coating</em> TiO<sub>2</sub> dan Al<sub>2</sub>O<sub>3</sub>. Hasil fisik <em>Smart</em>-partisi berupa papan penyekat tiga lapis dengan blotong tebu sebagai peredam suara pada bagian tengah partisi. Melalui hasil uji yang telah dilakukan, formula terbaik <em>Smart</em>-Partisi adalah 10%. Uji ini dilakukan juga dengan membandingkan beberapa partisi (<em>kalsiboard</em> dan <em>gypsum</em>).</p>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.