The growth rate of magnesium casting production in North America has averaged 16.6 percent per year over the last ten years.1-3 The fastest growing application for magnesium is the high-pressure die casting for automotive components, which represents approximately 70-80% of the magnesium casting shipments in recent years. This paper presents the latest developments in magnesium alloys, product design, casting technology, surface finishing, and magnesiummatrix composites. Current and future automotive applications of magnesium castings are also discussed.
Three tarnisli-testing procedures were applied to three 14 and 18ct AuAgCu and one 14ct AuAgChZn alloys widely used in decorative applications. Two gaseous phase tarnishing tests were investigated: a) the flower of sulphur test carried out at 50°C and 75% relative humidity for 5 days. and b) the thioacetamide test performed at ambient temperature and 75% relative humidity for 5 days.In addition. a liquid based method known as theTuccillo-Nielsen test whcre the samples arc alternatively immersed in an aqucous sulphide solution for 3 h was also studied. It was found that the general tarnishing aspect encountered in field trials was better reproduced in the liquid medium than in the gas phase tests. The colorations are more heterogcncous in the liquid test. The main advantage of the Tiiccillo-Nielsen test is that it requires only 3 h, but it can give rise to galvanic effects and may be difficult to apply to any forms of finished products. The thioacetamide test gave poorly reproducible and reliable results. In addition the colour changes after 5 days' exposure werz small: moreover, thioricetaniide is a carcinogen. The flower of sulphur test yielded large. rcproducihle colour changes. It should be preferred to the thioacetamide tesl For the accelcrated testing of silverand copper-containing alloys.Das Anlaufvcrhalten von drei AuAgCu-Legierungen mit 14 und 18 ct sowie einer AuAgCuZn-Legierung mit 14 cl, dre fur dekorative Zwecke vie1 verwendet wercicn. wurdc mit drc i \;crschiedenen Anlauf-Tests gepriift, daruntcr zwei Gasphasen :rests. namlich a) dcm Schwefclbluten-Test (50"C, 75% R E 5 d) tind b) dem Thioacetamid-Test (Raumtemperatur, 75% W, 5 d). tind einem Flussigphasen-Test . der alsTuccillo-Nielsen-rest beka int ist und bei dem die Probcn wahrcnd 3 h alternierend in eine wiii.ierige Sulfidlosung gctaucht werden. Es wurde festgestellt, daB -las in Feldversuchen gefundene Anlaufverhaltcn durch den Fliiss gphasen-Test besser als durch die Gasphasen-Xests wiedergegeher wird. D i e Verfirbungen sind aber beim Flussigphasen-Test unglei zhrnii-Bigcr. Dcr Hauptvorteil des Tuccillo-Nielsen-Tests liegt dari 1, dal3 cr nur 3 li erfordert: andererseits kiinnen dabei leicht Kontakteffekte auftretcn, und cs kann schwierig sein, damit Endprr d u k k 1)eliebiger Form ZLI prufen. Der Tliioacetamid-Test liefert sc hlccht reproduzicrbare und wenig zuverlgssige Ergcbnissc; aul3:rdem sind die nach 5 d erhaltenen Farbiindcrungen gering, und si:hliel3lich ist Thioacetamid auch kanzerogen. Der SchwefelblutcmTcst licfert ausgepriigte, reprodusierhare Verfiirbungen und ist daher bei der beschleunigtcn Prufung von silber-und kupferh iltigen Legierungen dem Thioacetamid-Test vorzuziehen.
The tarnishing resistance of two AuAg binary, one AuCu binary, three AuAgCu ternary and one AuAgCuZn quaternary alloys was investigated using two accelerated tarnish testing procedures. The flower of sulphur test carricd out in the gaseous phase and the Tuccillo-Nielsen method performed in an aqueous liquid solution were used. The tarnished layers were characterized by colorimetric and coulometric measurements. For most of the alloys, the colour turned both reddish and yellowish after tarnishing. A linear trend was found between the colour change and the cathodic charge, indicating that the thickness of the tarnished layer is small enough to be in the range where the reflectivity is linearly related to film thickness. For the high-silver alloys, the tarnished layer was thick enough to give rise to interference effects and therefore the tarnish is best characterized by the cathodic charge. It was found that the silver content is the dominant parameter influencing the tarnish resistance, but the copper content also plays a role. The tarnishing of AuAg binary alloys was interpreted as a quadratic function of silver content, while that of the ternary and quaternary alloys was found to be a simple additive effect of the silver and copper contributions.Die Anlaufbestandigkeit von zwei binaren Au Ag-, einer binaren AuCu-, drei ternaren AuAgCu-und einer quaternaren AuAg-CuZn-Legierung wurde mit zwei beschleunigten Anlaufpriifmethoden untersucht, und zwar dem in der Gasphase durchgefuhrten Schwefel-Ausbliihungstest und dem in wasseriger Phase durchgefiihrten Tuccillo-Nielsen-Test. Die Anlaufschichten wurden colorimetrisch und coulometrisch analysiert. Die Farbe der meisten untersuchten Legierungen wurde durch das Anlaufen nach rotlich und gelblich verschoben. Zwischen der Farbanderung und der Kathodenladung wurde eine lineare Beziehung gefunden, was darauf hindeutet, daB die Dicke der Anlaufschicht ausrcichend gering ist und daher eine lineare Beziehung zwischen Reflexionsvermogen und Filmdicke besteht. Bei den Legierungen mit hohem Silbergehalt war die Anlaufschicht so dick, daR Interferenzeffekte festzustellen waren; aus diesem Grunde wird das Anlaufen am besten durch die Kathodenladung charakterisiert. Es wurde gefunden, daR der Silbergehalt der Parameter ist, welcher die Anlaufbestandigkeit dominant bestimmt, doch spielt auch der Kupfergehalt eine gewisse Rolle. Das Anlaufen der binaren AuAg-Legierungen kann als quadratische Funktion des Silbergehaltes ausgedruckt werden, wahrend es sich bei den ternaren und quaternaren Legierungen um einen einfachen additiven Effekt des Silbers und Kupfers handelt.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.