International audienceTo convert the kinetic energy of marine current into electricity, the most sensible generator is a horizontal axis turbine. The know-how and the tools used for marine propulsion devices find a new range of applications in this field. An academic panel method code developed for the design of bare and ducted marine propellers was applied to design a marine current turbine. The turbine dimension and the tidal current velocity have been taken to fit the conditions in the Race of Alderney. The wing section theory and the optimum rotor theory based on the blade element momentum were used to obtain the design condition and a first geometry approaching the Betz limit for a bare rotor. The panel method was then used to verify the power coefficient obtained in the presence of the 3D effects and if the cavitation constraints are respected. Subsequently, the same panel code was used to verify if the addition of a duct could improve the power output per unit surface
International audienceCurrently, second generation intact stability criteria are being developed and evaluated by the International Maritime Organization (IMO). In this paper, we briefly present levels 1 and 2 assessment methods for the criteria of pure loss of stability and parametric roll failure modes. Subsequently, we show the KGmax curves associated with these criteria. We compute these curves for five different types of ships and compare them with the curves embodied in the current regulations. The results show that the safety margin ensured by the first level-1 method of calculation for both pure loss of stability and parametric roll seems to be excessive in many cases. They also show that the KGmax given by the second level-1 method and by the level-2 method may be very similar. In some cases, the level-2 method can be more conservative than the second level-1 method, which is unanticipated by the future regulation. The KGmax curves associated with parametric roll confirm that the C11 container ship is vulnerable to this failure mode. The computation of the second check coefficient of parametric roll level 2 (C2) for all possible values of KG reveals the existence of both authorized and restricted areas on the surface formed by both the draft and KG, which may replace the classical KGmax curves. In consequence, it is not sufficient to check that C2 is lower than the maximum authorized value (RPR0) for a fixed ship’s loading condition
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.