3D Carbon-fiber reinforced carbon composites (3D C f /C) are widely used as thermostructural protections in various applications. Among them, thermal protection systems for atmospheric re-entry encounter one of the most aggressive environments, where 3D C f /C are exposed to strong ablation. Because flight tests are

No abstract

No abstract

No abstract

The paper describes a study of convective heat transfer in a multiple-jet systems composed of straight and inclined slot nozzles. The application concerned is the fast cooling of moving strip. The experimental approach involves the application of infrared thermography associated with the steady-state heated foil technique. Three-dimensional numerical simulations performed with the code FLUENT compare agreeably with the IR data. The study aims to determine the effect on the average heat transfer coefficient of the slot Reynolds number up to the value of 100000, the nozzle spacing normalised by the slot hydraulic diameter in the range 6 ≤ W/S ≤ 18, the normalised nozzle emergence length, E/S, from 5 to 17 and the normalised nozzle to strip standoff distance Z/S from 3 to 10. The geometrical arrangements tested include perpendicular (90°) and tilted (60°) nozzles. A thermal entrainment phenomenon is found for cooling system of small width. A corrective factor is derived to account for this effect. The experimental findings are compared with existing correlation; deviations, which are observed at high values of the Reynolds number may reach 25%. The numerical simulation emphasises the benefit to use H2/N2 gas mixture to enhance significantly the cooling rate.

No abstract

Thermal properties of cryogenic fluids can profoundly change the nature of cavitation since the fluid pressure drop is not, anymore, the only driving parameter of this phenomenon.In this research, we have conducted experiments inducing cavitation via a cylindrical orifice using Liquid Nitrogen as working fluid and exploring cavitation regimes going from bubbly cavitation to full flashing. Among others, we performed unsteady pressure measurements to derive the speed of sound during cavitation and high-speed imaging to understand the evolution of the two-phase flow along the pipe.In our analysis we use five dimensionless numbers to describe the flow conditions upstream and downstream of the orifice, and the type of transition taking place across the orifice.In this paper, we show that the fluid initial subcooling level T sub upstream of the orifice and the superheat level Rp of the flow downstream of the orifice are two parameters essential to take into account the metastability of the fluid. Therefore, we propose a new semi-empirical model for predicting the effect of the fluid thermal properties on cavitation. Specifically, we define a parameter T which, multiplied by the saturation pressure at the inlet temperature, allows us to estimate the pressure reached at the orifice to cavitate.

No abstract