This study presents a simple synthetic approach for the in situ preparation of monodisperse hybrid Janus microspheres (HJM) having organic and inorganic parts in a PDMS‐based microfluidic device. Based on the mechanism of shear‐force‐driven break‐off, merged droplets of two photocurable oligomer solutions having distinctive properties are generated into an immiscible continuous phase. Functionalized perfluoropolyether (PFPE) as the organic phase and hydrolytic allylhydridopolycarbosilane (AHPCS) as the inorganic phase are used for the generation in aqueous medium of HJM with well‐defined morphology and high monodispersity (average diameter of 162 µm and a 3.5% coefficient of variation). The size and shape of the HJM is controlled by varying the flow rate of the disperse and continuous phases. The HJM have two distinctive regions: a hydrophobic hemisphere (PFPE) having a smooth surface and a relatively hydrophilic region (AHPCS) with a rough, porous surface. In addition, pyrolysis and subsequent oxidation of these HJM convert them into SiC‐based ceramic hemispheres through the removal of the organic portion and etching off the silica shell. The selective incorporation of magnetic nanoparticles into the inorganic part shows the feasibility of the forced assembly of HJM in an applied magnetic field.
In this review, the recent advancements of SERS for biomedical, food and agricultural applications in the past 6 years are discussed. We also discuss the opportunities and challenges in the field while highlighting the technological gaps.
Increased visceral fat, rather than subcutaneous fat, during the onset of obesity is associated with a higher risk of developing metabolic diseases. The inherent adipogenic properties of human adipose-derived stem cells (ASCs) from visceral depots are compromised compared with those of ASCs from subcutaneous depots, but little is known about the underlying mechanisms. Using ontological analysis of global gene expression studies, we demonstrate that many genes involved in retinoic acid (RA) synthesis or regulated by RA are differentially expressed in human tissues and ASCs from subcutaneous and visceral fat. The endogenous level of RA is higher in visceral ASCs; this is associated with upregulation of the RA synthesis gene through the visceral-specific developmental factor WT1. Excessive RA-mediated activity impedes the adipogenic capability of ASCs at early but not late stages of adipogenesis, which can be reversed by antagonism of RA receptors or knockdown of WT1. Our results reveal the developmental origin of adipocytic properties and the pathophysiological contributions of visceral fat depots.
We report a simple and easy to fabricate random silver film (RSF) as a highly sensitive Surface Enhanced Raman Scattering (SERS) substrate which can be fabricated directly onto a dielectric substrate such as glass. An electron beam evaporation system was used for substrate fabrication. The SERS activity is attributed to the formation of electromagnetic 'hot-spots' on the film. Substrate performance is analyzed by studying the reproducibility and signal enhancement from the Raman active molecule, 2-naphthalene thiol (NT), which is covalently anchored to the substrate. The metal thickness is optimized to achieve the highest SERS enhancement. Based on this study we found that a 7 nm RSF substrate gave the best SERS activity. The SERS signal intensity exhibited by 7 nm RSF is found to be at least 3 orders of magnitude higher than that of a commercial substrate. The SERS enhancement factor is estimated to be $1 Â 10 7 with a point-to-point intensity variation of about 12% and it reaches a maximum of 15% for batch-tobatch comparison. The efficacy of this substrate for biosensing is demonstrated by detecting H1 influenza protein, and the detection limit is found to be $10 pM when it is used along with a recently established nano-stress SERS sensor, 4-ATP (4-amino-thiophenol), as linker molecule. This detection limit shows a performance superior to conventional ELISA (which has a nM detection limit). These results show promise for the development of a biosensing platform based on the marriage of RSF with nanostress sensors.
Monolithic 3D porous silica structures are fabricated into a multilayer framework with a bimodal pore size distribution in the micrometer and sub‐micrometer range. The fabrication – which involves directed assembly of colloidal spheres, transfer printing, and removal of a sacrificial template – yields robust and mechanically stable structures over a large area. The structure becomes monolithic upon pyrolyzing the stacked layers, which induces necking of the particles. The monolithic microstructures can easily be embedded in microchannels with the aid of photolithography, leading to the formation of a microfluidic system with a built‐in microstructure in a site‐ and shape‐controlled manner. Utilization of the system results in a fourfold increase in the mixing efficiency in the microchannel.
In this report, we present a non-lithographic embedded template method for rapid and cost-effective fabrication of a monolithic microfluidic device with channels of various sizes. The procedure presented here enables the preparation of microchannels with varying dimensions in a single device without using any sophisticated micromachining instrumentation. In addition, this non-lithographic technique has also been used to fabricate a multilayer-multilevel biopolymer microdevice in a single step. To demonstrate the versatility of the presented method, we have fabricated microfluidic devices with four different materials under different curing/cross linking conditions. We have also demonstrated the application of the fabricated device to generate structured copper alginate microbeads, in vitro protein synthesis in three phase flow, and alternate plugs with liquid spacers.
Well-defined diblock copolymers were synthesized via an exothermic RAFT route by a droplet microfluidic process using a solvent-resistant and thermally stable fluoropolymer microreactor fabricated by a non-lithographic embedded template method. The resulting polymers were compared to products obtained from continuous flow capillary reactor and conventional bulk synthesis. The droplet based microreactor demonstrated superior molecular weight distribution control by synthesizing a higher molecular weight product with higher conversion and narrow polydispersity in a much shorter reaction time. The high quality of the as-synthesized block copolymer PMMA-b-PS led to a generation of micelles with a narrow size distribution that could be used as a template for well-ordered mesoporous silica with regular frameworks and high surface areas.
A novel nanosensing platform was developed for the quantitative detection of creatinine of clinically relevant concentrations via UV-Vis spectroscopy and surface-enhanced Raman spectroscopy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.