No abstract

This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.

DOSAVIÑA is a new tool (website and app for smartphones) developed for calculating the optimal volume rates and pesticide doses to apply during spray application processes in vineyards. DOSAVIÑA also calculates and recommends the optimal working parameters for working pressure, forward speed, and number and types of nozzles. DOSAVIÑA was developed by the Unit of Agricultural Machinery at the Universitat Politècnica de Catalunya, and is available for iOS and Android devices. It is also available on the DOSAVIÑA website (https://dosavina.upc.edu). The developed tool can be used for the calibration of spray applications on fruit trees (as well as on citrus orchards, olive trees, almond trees, and many other vertical crops) once the volume rate has been established. The system, which is based on a modified version of the leaf wall area (LWA) method, calculates the optimal volume rate for vineyards by considering the effects of leaf density, canopy width, and sprayer type. System testing took biological efficacy into consideration and measured the main factors used for characterizing spray processes, coverage, and distribution over the entire canopy.Results showed that water and pesticide use could be reduced by more than 20% while still meeting economic, environmental, and food quality requirements. The design of the tool is aligned with European requirements concerning pesticide use, as established in the European Directive for a Sustainable Use of Pesticides.

Canopy characterisation is a key factor for the success and efficiency of the pesticide application process in vineyards. Canopy measurements to determine the optimal volume rate are currently conducted manually, which is time-consuming and limits the adoption of precise methods for volume rate selection. Therefore, automated methods for canopy characterisation must be established using a rapid and reliable technology capable of providing precise information about crop structure. This research providedregression models for obtaining canopy characteristics of vineyards from unmanned aerial vehicle (UAV) and satellite images collected in three significant growth stages. Between 2018 and 2019, a total of 1400 vines were characterised manually and remotely using a UAV and a satellite-based technology. The information collected from the sampled vines was analysed by two different procedures. First, a linear relationship between the manual and remote sensing data was investigated considering every single vine as a data point. Second, the vines were clustered based on three vigour levels in the parcel, and regression models were fitted to the average values of the ground-based and remote sensing-estimated canopy parameters. Remote sensing could detect the changes in canopy characteristics associated with vegetation growth. The combination of normalised differential vegetation index (NDVI) and projected area extracted from the UAV images is correlated with the tree row volume (TRV) when raw point data were used. This relationship was improved and extended to canopy height, width, leaf wall area, and TRV when the data were clustered. Similarly, satellite-based NDVI yielded moderate coefficients of determination for canopy width with raw point data, and for canopy width, height, and TRV when the vines were clustered according to the vigour. The proposed approach should facilitate the estimation of canopy characteristics in each area of a field using a cost-effective, simple, and reliable technology, allowing variable rate application in vineyards.

Canopy characteristics are crucial for accurately and safely determining the pesticide quantity and volume of water used for spray applications in vineyards. The inevitably high degree of intraplot variability makes it difficult to develop a global solution for the optimal volume application rate. Here, the design procedure of, and the results obtained from, a variable rate application (VRA) sprayer are presented. Prescription maps were generated after detailed canopy characterization, using a multispectral camera embedded on an unmanned aerial vehicle, throughout the entire growing season in Torrelavit (Barcelona) in four vineyard plots of Chardonnay (2.35 ha), Merlot (2.97 ha), and Cabernet Sauvignonn (4.67 ha). The maps were obtained by merging multispectral images with information provided by DOSAVIÑA®, a decision support system, to determine the optimal volume rate. They were then uploaded to the VRA prototype, obtaining actual variable application maps after the application processes were complete. The prototype had an adequate spray distribution quality, with coverage values in the range of 20–40% and exhibited similar results in terms of biological efficacy on powdery mildew compared to conventional (and constant) application volumes. The VRA results demonstrated an accurate and reasonable pesticide distribution, with potential for reduced disease damage even in cases with reduced amounts of plant protection products and water.

BACKGROUND Leaf wall area (LWA) has been proposed as an appropriate dose expression for field testing of plant protection products (PPPs) applied via foliar spray in trellised grapes. However, its efficiency could change depending on the characteristics of the crop or the pesticide application equipment (PAE). Herein, three spray technologies were evaluated. A traditional air‐assisted tractor‐mounted sprayer was compared with two portable knapsack sprayers: a backpack mistblower and a backpack hydraulic sprayer. Trials were conducted in trellised wine grapes at three selected crop stages (BBCH 55, 65, 75) covering the main period of canopy development. In each canopy stage, leaf deposition and coverage were sampled for each technology. The tractor‐mounted sprayer was working at 200 L ha−1 of LWA spray volume for the earliest stage and 370 L ha−1 for the other two. Three higher volume rates were used for backpack sprayers up to 800 and 1250 L ha−1 for the mistblower and the hydraulic system, respectively. RESULTS Optimal LWA spray volumes differed among application devices in terms of efficiency and uniformity of deposition on the canopy. The efficiency of each spray application also was conditioned by the spray volume. CONCLUSION LWA is useful for defining optimal spray volumes in trellised grapes. However, both canopy density and spray technology should be considered to assist this process. Field testing of PPPs and subsequent label recommendations should consider the relative efficiencies of corresponding experimental and conventional spray technologies. © 2021 Society of Chemical Industry

Air assisted sprayers are currently used for the applications of plant protection products in fruit trees and vineyards. However, the use of these equipment carries a high environmental risk, mainly owing to the generation of airborne spray drift in the lower boundary layer above crop canopy. Hence, many tests are currently focused on investigating several factors that affect the efficiency of the spray process, in which air assistance and air behaviour are two of the most difficult parameters to evaluate. This present work proposes a first approach on the characterization of the airflow generated

Canopy characteristics are crucial for accurately and safely determining the pesticide quantity and volume of water used for spray applications in vineyards. The inevitably high degree of intra-plot variability makes it difficult to develop a global solution for the optimal volume application rate. Here, the design procedure of, and the results obtained from, a variable rate application (VRA) sprayer are presented. Prescription maps were generated after detailed canopy characterization, using a multispectral camera embedded on an unmanned aerial vehicle, throughout the entire growing season in Torrelavit (Barcelona) in four vineyard plots of Chardonnay (2.35 ha), Merlot (2.97 ha), and Cabernet Sauvignonn (4.67 ha). The maps were obtained by merging multispectral images with information provided by DOSAVIÑA®, a decision support system, to determine the optimal volume rate. They were then uploaded to the VRA prototype, obtaining actual variable application maps after the application processes were complete. The prototype had an adequate spray distribution quality and exhibited similar results in terms of biological efficacy on powdery mildew compared to conventional (and constant) application volumes. The VRA results demonstrated an accurate and reasonable pesticide distribution, with potential for reduced disease damage even in cases with reduced amounts of plant protection products and water.