Abstract:The failure of a proximal humerus internal locking system (PHILOS) used in a pantalar arthrodesis was investigated in this paper. PHILOS constructs are hybrids using locking and non-locking screws. Both the plate and the screws used in the fusion were obtained for analysis. However, only the plate failure analysis is reported in this paper. The implant had failed in several pieces. Optical and scanning electron microscopic analyses were performed to characterize the failure mode(s) and fracture surface. The chemical composition and mechanical properties of the plate were determined and compared to controlling specifications to manufacture the devices. We found that equivalent tensile strength exceeded at the locations of high stress, axial, and angular displacement and matched the specification at the regions of lower stress/displacement. Such a region-wise change in mechanical properties with in vivo utilization has not been reported in the literature. Evidence of inclusions was qualitatively determined for the stainless steel 316L plate failing the specifications. Pitting corrosion, scratches, discoloration and debris were present on the plate. Fracture surface showed (1) multi-site corrosion damage within the screw holes forming a 45 • maximum shear force line for crack-linking, and (2) crack propagation perpendicular to the crack forming origin that may have formed due to the presence of inclusions. Fracture features such as beach marks and striations indicating that corrosion may have initiated the crack(s), which grew by fatigue over a period of time.In conclusion, the most likely mechanism of failure for the device was due to corrosion fatigue and lack of bony in-growth on the screws that may have caused loosening of the device causing deformity and pre-mature failure.
Background Structural cortical bone allografts are a reasonable treatment option for patients with large cortical bone defects caused by trauma, tumors, or complications of arthroplasty. Although structural cortical bone allografts provide the benefit of an osteoconductive material, they are susceptible to fatigue failure (fracture) and carry a risk of disease transmission. Radiation-sterilization at the recommended dose of 25 kGy decreases the risk of disease transmission. However, previous studies demonstrated that radiation sterilization at this dose can negatively impact the high cycle-fatigue life of cortical bone. Although the effects of higher doses of radiation on cortical bone allografts are well described, the effects of lower doses of radiation on a high-cycle fatigue life of cortical bone are poorly understood. Questions/purposes (1) Does the cycle-fatigue life of human cortical allograft bone vary with gamma radiation dose levels of 0 (control), 10 kGy, 17.5 kGy, and 25 kGy? (2) What differences in Raman spectral biomarkers are observed following varying doses of gamma radiation exposure?Methods The high-cycle fatigue behavior of human cortical bone specimens was examined at different radiation sterilization doses under physiologic stress levels (35 MPa) and in a 37°C phosphate-buffered saline bath using a custom-designed rotating-bending fatigue device. Six human femora from three donors were obtained for this study (two male, 63 and 61 years old, respectively, and one female, 48 years old). Test specimens were allocated among four treatment groups (0 kGy [control], 10 kGy, 17.5 kGy, and 25 kGy) based on donor and anatomic location of harvest site (both length and cross-sectional quadrant of femoral diaphysis) to ensure equal variation (n = 13 per group). Specimens underwent high-cycle fatigue testing to failure. The number of cycles to failure was recorded. Raman spectroscopy (a noninvasive vibrational spectroscopy used to qualitatively assess bone quality) was used to detect whether any changes in Raman spectral biomarkers occurred after varying doses of gamma radiation exposure. Results There was a decrease in the log-transformed mean high-cycle fatigue life in specimens irradiated at 25 kGy (5.39 6 0.32) compared with all other groups (0 kGy: 6.20 6 0.50; 10k Gy: 6.35 6 0.79; 17.5 kGy: 6.01 6 0.53; p = 0.001). Specimens irradiated at 25 kGy were also more likely to exhibit a more brittle fracture surface pattern than specimens with more ductile fracture surface patterns irradiated at 0 kGy, 10 kGy, and 17.5 kGy (p = 0.04). The Raman biomarker for the ratio of the relative amount of One of the authors (CMR) certifies receipt personal payments or benefits, during the study period, in an amount of USD 100,001 to USD 1,000,000 from the Musculoskeletal Transplant Foundation. All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request. Ethical approval for this study was not sou...
Kinesthesia is the sense of limb movement. It is fundamental to efficient motor control, yet its neurophysiological components remain poorly understood. The contributions of primary muscle spindles and cutaneous afferents to the kinesthetic sense have been well studied; however, potential contributions from muscle sensory group responses that are different than the muscle spindles have not been ruled out. Electrophysiological recordings in peripheral nerves and brains of male Sprague Dawley rats with a degloved forelimb preparation provide evidence of a rapidly adapting muscle sensory group response that overlaps with vibratory inputs known to generate illusionary perceptions of limb movement in humans (kinesthetic illusion). This group was characteristically distinct from type Ia muscle spindle fibers, the receptor historically attributed to limb movement sensation, suggesting that type Ia muscle spindle fibers may not be the sole carrier of kinesthetic information. The sensory-neural structure of muscles is complex and there are a number of possible sources for this response group; with Golgi tendon organs being the most likely candidate. The rapidly adapting muscle sensory group response projected to proprioceptive brain regions, the rodent homolog of cortical area 3a and the second somatosensory area (S2), with similar adaption and frequency response profiles between the brain and peripheral nerves. Their representational organization was muscle-specific (myocentric) and magnified for proximal and multi-articulate limb joints. Projection to proprioceptive brain areas, myocentric representational magnification of muscles prone to movement error, overlap with illusionary vibrational input, and resonant frequencies of volitional motor unit contraction suggest that this group response may be involved with limb movement processing.
Background Fatty infiltration of the rotator cuff occurs after injury to the tendon and results in a buildup of adipose in the muscle. Fatty infiltration may be a biomarker for predicting future injuries and mechanical properties after tendon repair. As such, quantifying fatty infiltration accurately could be a relevant metric for determining the success of tendon repairs. Currently, fatty infiltration is quantified by an experienced observer using the Goutallier or Fuchs staging system, but because such score-based quantification systems rely on subjective assessments, newer techniques using semiautomated analyses in CT and MRI were developed and have met with varying degrees of success. However, semiautomated analyses of CT and MRI results remain limited in cases where only a few two-dimensional slices of tissue are examined and applied to the three-dimensional (3-D) tissue structure. We propose that it is feasible to assess fatty infiltration within the 3-D volume of muscle and tendon in a semiautomated fashion by selecting anatomic features and examining descriptive metrics of intensity histograms collected from a cylinder placed within the central volume of the muscle and tendon of interest. Questions/purposes (1) Do descriptive metrics (mean and SD) of intensity histograms from microCT images correlate with the percentage of fat present in muscle after rotator cuff repair? (2) Do descriptive metrics of intensity histograms correlate with the maximum load during mechanical testing of rotator cuff repairs? Methods We developed a custom semiautomated program to generate intensity histograms based on user-selected anatomic features. MicroCT images were obtained from 12 adult female New Zealand White rabbits (age 8 to 12 months, weight 3.7 kg ± 5 kg) that were randomized to surgical repair or sham repair of an induced infraspinatus defect. Intensity histograms were generated from images of the operative and contralateral intact shoulder in these rabbits which were presented to the user in a random order without identifying information to minimize sources of bias. The mean and SD of the intensity histograms were calculated and compared with the total percentage of the volume threshold as fat. Patterns of fat identified were qualitatively compared with histologic samples to confirm that thresholding was detecting fat. We conducted monotonic tensile strength-to-failure tests of the humeral-infraspinatus bone-tendon-muscle complex, and evaluated associations between histogram mean and SDs and maximum load. Results The total percentage of fat was negatively correlated with the intensity histogram mean (Pearson correlation coefficient -0.92; p < 0.001) and positively with intensity histogram SD (Pearson correlation coefficient 0.88; p < 0.001), suggesting that the increase in fat leads to a reduction and wider variability in volumetric tissue density. The percentage of fat content was also negatively correlated with the maximum load during mechanical testing (Pearson correlation coefficient -78; p = 0.001), indicating that as the percentage of fat in the volume increases, the mechanical strength of the repair decreases. Furthermore, the intensity histogram mean was positively correlated with maximum load (Pearson correlation coefficient 0.77; p = 0.001) and histogram SD was negatively correlated with maximum load (Pearson correlation coefficient -0.72; p = 0.004). These correlations were strengthened by normalizing maximum load to account for animal size (Pearson correlation coefficient 0.86 and -0.9, respectively), indicating that as histogram mean decreases, the maximum load of the repair decreases and as histogram spread increases, the maximum load decreases. Conclusion In this ex vivo rabbit model, a semiautomated approach to quantifying fat on microCT images was a noninvasive way of quantifying fatty infiltration associated with the strength of tendon healing. Clinical Relevance Histogram-derived variables may be useful as surrogate measures of repair strength after rotator cuff repair. The preclinical results presented here provide a foundation for future studies to translate this technique to patient studies and additional imaging modalities. This semiautomated method provides an accessible approach to quantification of fatty infiltration by users of varying experience and can be easily adapted to any intensity-based imaging approach. To translate this approach to clinical practice, this technique should be calibrated for MRI or conventional CT imaging and applied to patient scans. Further investigations are needed to assess the correlation of volumetric intensity histogram descriptive metrics to clinical mechanical outcomes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.