Soft magnetic nanocrystalline alloys have been widely analysed and studied during the past years. However, optimisation of specific chemical compositions is still being developed. The applicability of these soft nanocrystalline alloys depends mainly on the presence of the desired nanocrystalline phases within the alloy. In this study, the analysed alloys are manufactured by mechanical alloying. The analyses performed on the samples include a microstructural analysis, a thermal analysis, and a complementary functional analysis in the form of the thermomagnetic response of some samples. Regarding Fe-based alloys, thermal stability for samples containing B was higher than those containing P (crystal growth peaks in the range between 895–905 K and 775–800 K respectively). The higher magnetization of saturation, Ms, was found in Fe–Mn alloys, whereas the addition of boron provoked a decrease of Ms and the nanocrystals size.

Two nanocrystalline ferromagnetic alloys of the Fe-Co-Nb-B system have been produced by mechanical alloying (MA). Their microstructure, thermal behavior and magnetic response were checked by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and vibrating sample magnetometry (VSM). After 80 h of MA, the alloys were nanostructured (bcc-Fe(Co)-rich phase). As the Co content increases, the density of the dislocations decreases. Besides, a higher concentration of Co causes an increase in the activation energy of the crystallization process. The calculated energies, 267 and 332 kJ/mol, are associated to the crystalline growth of the bcc-Fe-rich phase. The Co content of the samples has no effect on the value of the saturation magnetization, whereas the coercivity is lower in the alloy containing less Co. Samples were compacted and heat-treated. Optimal annealing reduces the coercivity by a factor of two. Results were compared with the data of Fe-Nb-B and Fe-Ni-Nb-B alloys.

In this study, a combined process of reduction and adsorption for the degradation of azo dye with nanocrystalline Fe80Si10B10 powder as a reducing agent is analyzed. A mechanical alloying technique produced the powdered alloys needed for the redox process. The synthesized nanocrystalline structure favors the efficiency of the reduction step of Reactive Black 5 (RB5) azo dye. According to the UV-Vis analysis, the reductive process alone allowed for nearly complete color removal after 3 min of reaction. In this regard, the nanocrystallized FeSiB powder has excellent application potential in the first step of the reduction processes for degrading azo dye solutions. Indeed, the nanocrystalline FeSiB powder outperforms commercial Fe powders in terms of degradation efficiency because of the formation of multiple micro-batteries between the α-Fe solid solution and the Fe3Si nanocrystalline phases, favoring the loss of electrons from iron and exhibiting different corrosion resistance. In the second step, the adsorption process, the efficient removal of intermediate undesired compounds from the reduction processes, principally aromatic amines, is analyzed. Different adsorbents, including wood, graphene oxide, activated carbon, and pine particles, were used. The results suggest that graphene oxide and activate carbon performed the best for secondary product adsorption following RB5 degradation. The current study could serve as a guide for environmental applications, such as industrial wastewater treatment, using metallic powders produced by high-energy mechanical alloying.

In this work, structural, microstructural, thermal, and magnetic properties of a Fe-25at%Al alloy produced by high-energy mechanical milling were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and vibrating sample magnetometry (VSM) techniques. At the early stage of the milling process, three phases, namely, Fe, Al, and Fe(Al), coexist in the milled powder. After 20 h of milling, the results of the refinement of the XRD pattern reveal the formation of the supersaturated bcc-Fe(Al) solid solution with a crystallite size of 10 nm. The DSC curves show several overlapped exothermic peaks associated with the relaxation of the deformed structure and various phase transitions, such as the formation of Al13Fe4 and Fe3Al intermetallic. During milling times, the alloyed samples have a hard-ferromagnetic behavior, where Hc varies from 628 Oe to 746 Oe when the milling time increases from 4 to 40 h. The magnetic properties were related to the microstructural changes.

Heusler alloy with an atomic composition of Ni51.82Mn32.37In15.81 was prepared by melt spinning from arc-melted ingots. X−ray diffraction, scanning electron microscopy and magnetic measurements were used to study the structural, microstructural and magnetic properties. The crystal structure consists of a mixture of B2 austenite (~50%) and 14M martensite (~50%). The alloy undergoes a second order magnetic transition at a Curie temperature of TcA=194.2 K. The hysteresis loop reveals the occurrence of exchange bias phenomenon at room temperature. The critical exponents β, γ and δ were estimated using modified Arrott plots, Kouvel–Fisher curves and critical isothermal analysis. The respective values are β=0.500±0.015, γ=1.282±0.055 and δ=3.003±0.002. The critical behaviour in ribbons is governed by the mean field model with a dominated long-range order of ferromagnetic interactions. The maximum entropy change, ∆SMmax, for an applied magnetic field of 5 T reaches an absolute value of 0.92 J/kg.K. The experimental results of entropy changes are in good agreement with those calculated using Landau theory.